SBS - The Best Value in QMS software

Requirements Summary - Part 21g / Part 21j and Part 145 and DAOS

B

Baggie

#1
Hi,
I have circa 25 years experience in Automotive & Electronics Quality and I'm fully au-fait with ISO9000 / AS9100 / TS16949, however my company has recently acquired a business which designs / manufactures and repairs (its own) equipment for both military & civil aircraft.

The equipment is not part of the airframe, I would best describe it as ancillary equipment.
The newly acquired business has ISO 9000 accreditation (albeit a poor QMS) which we will be developing to satisfy AS 9100C.

My problem is,
I am finding great difficulty in getting a listing of requirements for part 21g / part 21J / part 145 and DAOS.
The documents I find are wordy / un-structured and seem non-specific. Every time I start trying to do a gap analysis, I end up going around in circles trying to understand what the specific requirements are :(.

Is anyone in possession of a straight forward summary of the requirements of these standards PLEASE.:thanx:
 
Elsmar Forum Sponsor
A

Angelika

#2
Re: The requirements part 21g / Part 21j and part 145

Hi,
I have circa 25 years experience in Automotive & Electronics Quality and I'm fully au-fait with ISO9000 / AS9100 / TS16949, however my company has recently acquired a business which designs / manufactures and repairs (its own) equipment for both military & civil aircraft.

The equipment is not part of the airframe, I would best describe it as ancillary equipment.
The newly acquired business has ISO 9000 accreditation (albeit a poor QMS) which we will be developing to satisfy AS 9100C.

My problem is,
I am finding great difficulty in getting a listing of requirements for part 21g / part 21J / part 145 and DAOS.
The documents I find are wordy / un-structured and seem non-specific. Every time I start trying to do a gap analysis, I end up going around in circles trying to understand what the specific requirements are :(.

Is anyone in possession of a straight forward summary of the requirements of these standards PLEASE.:thanx:


Baggie,

for Part 21, Subpart G (manufacturing approval) you have to follow the requirements i.a.w. Part 21, Subparts A, G and Q.

For Part 145 (maintenance) all the requirements are contained in Part 145.

Part 21, Subpart J (Design Organisation) is required only if you want to design changes or repairs on aircraft level. If you want to design equipment, you have to show compliance with Part 21, Subpart O, including Subparts A and O.

You can find the above regulations in the EASA website. Part 21 is part of EC Regulation 1702/2003, Part 145 of EC Regulation 2042/2003. Please consider the amendments to the Regulations.

DAOS - I have never heard about this - what does it mean?

The military has its own requirements (AQAP).



Angelika
 
E

eli dahabany

#3
Re: The requirements part 21g / Part 21j and part 145

Baggie,

for Part 21, Subpart G (manufacturing approval) you have to follow the requirements i.a.w. Part 21, Subparts A, G and Q.

For Part 145 (maintenance) all the requirements are contained in Part 145.

Part 21, Subpart J (Design Organisation) is required only if you want to design changes or repairs on aircraft level. If you want to design equipment, you have to show compliance with Part 21, Subpart O, including Subparts A and O.

You can find the above regulations in the EASA website. Part 21 is part of EC Regulation 1702/2003, Part 145 of EC Regulation 2042/2003. Please consider the amendments to the Regulations.

DAOS - I have never heard about this - what does it mean?

The military has its own requirements (AQAP).



Angelika


dear anjelika

i read the part 21 subpart J , and still cannot find any reqirement as to HUMAN FACTORS issue.
do you know of any? or maybe an DOA approval is linked or related to other HF reqirements such as in part 145? if yes, how?

thanks
eli
 
A

Angelika

#4
Re: The requirements part 21g / Part 21j and part 145

Eli,

there are no HF requirements in Part 21, Subpart J.

Regards,
Angelika
 
B

Baggie

#5
Re: The requirements part 21g / Part 21j and part 145

I guess I didn't frame my question correctly.
I do understand that I can find the requirements in the documents, but the way the documents are structured is confusing and not simple to follow.

What I am looking for is a requirements matrix, to ensure I have all the elements covered.

By the way DAOS is the MOD "Design Approved Organisation Scheme" 05-23 seems to be the requirements doc.
 
Thread starter Similar threads Forum Replies Date
K Clinical Evaluation Report Article Summary Requirements EU Medical Device Regulations 5
S Quality Manual - Summary of Differences Between QS-9000 and TS 16949 Requirements Quality Management System (QMS) Manuals 42
A ISO 9000:2000 Clause 7.3 Design and Development Requirements Summary Design and Development of Products and Processes 23
G How to implement H&S and Quality Control Requirements in Contract for Potential Supplier? Contract Review Process 6
D Customer Specific Requirements / Customer Requirements for Indirect Customers IATF 16949 - Automotive Quality Systems Standard 10
J Print Requirements Manufacturing and Related Processes 9
S Requirements for Certificate of Destruction for Surgical Instruments Medical Device and FDA Regulations and Standards News 2
R FAI & P.O. Requirements AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 11
W MDD Distributor Registration Requirements Other Medical Device Regulations World-Wide 0
M FDA Requirements for Investigational Devices - Clinical Investigation & Shipping Medical Device and FDA Regulations and Standards News 0
B Requirements for LiPo Batteries in the EU ? CE Marking (Conformité Européene) / CB Scheme 7
pbojsen ISO 13485 Requirements versus FDA product classification and GMP exemptions - Audits ISO 13485:2016 - Medical Device Quality Management Systems 3
A MDR - Legacy Device Review Timeframe and Requirements EU Medical Device Regulations 3
J Translation requirements for the statement referred to in ANNEX XIII of MDR EU Medical Device Regulations 0
D Hand Held medical device - power supply requirements IEC 60601 - Medical Electrical Equipment Safety Standards Series 7
J Gauge Management - with ambiguous requirements & no support ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
lanley liao How to understand and master the requirements of each section in API monogram product. Oil and Gas Industry Standards and Regulations 5
K ASME, ANSI, ASTM and similar specifications and their requirements for document control. Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
Y MDR requirements for Class I accessories EU Medical Device Regulations 2
K IATF audit day requirements table 5.2 IATF 16949 - Automotive Quality Systems Standard 6
L Change Notification Requirements for class 1 devices Medical Device and FDA Regulations and Standards News 1
C Requirements for distributors under MDR: translation EU Medical Device Regulations 0
D What are the acceptance criteria/requirements for Stability Study? General Measurement Device and Calibration Topics 7
P UDI-PI requirements on reusable surgical device, do we need serialisation? ISO 13485:2016 - Medical Device Quality Management Systems 3
Sidney Vianna Interesting Discussion Should ISO 9004 be changed from a guidance document to a requirements standard? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
J WAIVED ON Q1 - We Don't have to comply with FORDS customer specific requirements IATF 16949 - Automotive Quality Systems Standard 3
Q Do these certificates of calibration meet ISO 9001 requirements for traceability to NIST? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 23
ebrahim QMS as per ISO 13485, Clause 4.2 Requirements for regulatory purposes for Medical Devices Authorized Representatives. ISO 13485:2016 - Medical Device Quality Management Systems 3
Techilady Ford Special Characteristics Communication and Agreement Form (SCCAF) provides production requirements? FMEA and Control Plans 4
P Requirements for being an European Representative EU Medical Device Regulations 3
C ISO 14001:2015 6.1.3 Compliance Obligations - Legal requirements monitoring ISO 14001:2015 Specific Discussions 0
A GPS Regulatory requirements? Manufacturing and Related Processes 6
J SSQR-01 Vision Requirements- Color Blindness AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
P ISO 14644 Class 8 Cleanroom Air Filter Requirements Other Medical Device Related Standards 4
J Requirements as a Distributor for Incoming Inspection of Purchased Finished Medical Device Medical Device Related Regulations 0
R Weld Penetration Standards and Requirements Manufacturing and Related Processes 2
S Registration of Medical Device in Hong Kong - labeling requirements Other Medical Device Regulations World-Wide 1
L Requirements for Cables used for Low-Voltage DC Mains (12-36VDC) IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
M AS9100D Registrar pre-audit requirements AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 15
S Determining the requirements for the products and services ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
D LiPo battery minimum requirements IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
V MDSAP Requirements for Device Designer Canada Medical Device Regulations 1
J Biocompatbility testing on Class 1 device requirements Other US Medical Device Regulations 12
Le Chiffre Online training available for ISO/IEC 17021-1: Requirements for bodies providing audit and certification of management systems Training - Internal, External, Online and Distance Learning 3
S What are the International Forging Requirements for Nitrogen Strengthened Stainless Steel? EU Medical Device Regulations 3
M Supplier requirements - Major supplier is a Non-Profit registered with ICCBBA (FDA UDI) Supply Chain Security Management Systems 12
R Components to a finished medical device, MDR requirements Other US Medical Device Regulations 1
S Distributor requirements in US 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
K AS9100D 8.2.1 Review Requirements for Products and Services AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 14
F Environmental Requirements E-Lab General Measurement Device and Calibration Topics 0

Similar threads

Top Bottom