Resolution in calibration

Z

Zavtra

Registered
#1
#1
Theory question: I am calibrating a pressure gage with a resolution of 0.1 psi. I am monitoring it with a Standard Pressure Gage with a resolution of 0.01 PSI. Is my tolerance limited to a resolution of 0.1 PSI due to the UUT or can I use the 0.01 PSI resolution of the standard since that is what I am taking the measurement from?
 
Highly Rated Gage Tracking - Learn More
Elsmar Forum Sponsor
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
C Should resolution be included in uncertainty budget for digital caliper or micrometer calibration? Measurement Uncertainty (MU) 5
P Resolution Requirements on Calibration Certificates General Measurement Device and Calibration Topics 8
K Micrometer Calibration - Resolution, Accuracy and Range General Measurement Device and Calibration Topics 16
V Analog Pressure Gauge Calibration - smallest resolution practice General Measurement Device and Calibration Topics 13
N Confuse: Calibration using master equipment - Resolution - Micrometer General Measurement Device and Calibration Topics 7
apestate Calibrating .001" resolution Dial Calipers - Calibration and safeguarding procedure General Measurement Device and Calibration Topics 6
M Is there a mandatory requirement to notify customers of the complaint resolution in ISO 9001:2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 9
L Text of "Kobe resolution 1" publicly available? IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
Q Resolution of Measurement Device for a 50' Coil Reliability Analysis - Predictions, Testing and Standards 1
M How to apply IEC 62304 Problem Resolution Process for bugs discovered prior to release i.e. during initial development? IEC 62304 - Medical Device Software Life Cycle Processes 2
G 0.00005" tolerance on micrometer with 0.0005" resolution? General Measurement Device and Calibration Topics 4
G Does pitch/increment/resolution of a ruled scale apply to measurement uncertainty as line item? Measurement Uncertainty (MU) 10
G Problem Resolution Report Monitoring - Customer complaint or PRR as general motors use Customer Complaints 12
S Relationship between IEC 62304 problem resolution and ISO 13485 IEC 62304 - Medical Device Software Life Cycle Processes 8
T Customer rejected MDS - easiest resolution? RoHS, REACH, ELV, IMDS and Restricted Substances 1
Wes Bucey Conflict Resolution (without bloodshed) Misc. Quality Assurance and Business Systems Related Topics 1
F Resolution III Factorial Design for a Screening Experiment Six Sigma 2
O Make Layout Higher Resolution? Using Minitab Software 1
S FDA Warning Letter Remediation - Enforcement Resolution & Remediation Process US Food and Drug Administration (FDA) 3
B Total Resolution of an Measurement Instrument Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
S Steel Coil Scale Verification Resolution Calibration Frequency (Interval) 7
P Measurement Equipment - 10:1, 4:1 - Is it resolution or accuracy General Measurement Device and Calibration Topics 1
Jerry Eldred When Does Resolution of Measurement Standard Apply in Uncertainty Calculations General Measurement Device and Calibration Topics 14
B Treating Resolution - Rectangular or Triangular Distribution Measurement Uncertainty (MU) 6
D Resolution V Factorial Design with 5 factors (3 numerical and two text) Using Minitab Software 1
E Measuring Parts without Proper Tools - Measurement Device Resolution Inspection, Prints (Drawings), Testing, Sampling and Related Topics 10
P Capability Analysis for Limited Resolution (thickness of sheets) Capability, Accuracy and Stability - Processes, Machines, etc. 6
R Definition PR&R - GM's Problem Reporting & Resolution System Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 4
P Not Enough Resolution for Gage R&R - 79" Panel Length Measurements Help Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 10
J IAQG Resolution #67 - Extension of time frame for upgrade to ISO 9001:2008 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
C Gage Resolution vs. Tolerance Manufacturing and Related Processes 5
N ASME B89.1.13 question regarding Resolution and Maximum Permissible Error General Measurement Device and Calibration Topics 3
T Resolution Analysis - Has anyone ever performed a Resolution Analysis? General Measurement Device and Calibration Topics 1
L What is Resolution Analysis? Measurement Uncertainty (MU) 2
somashekar New year resolution 2010 .. "No posts deleted by moderators" Coffee Break and Water Cooler Discussions 6
bobdoering Gage Resolution Required for SPC! Imported Legacy Blogs 1
C UUT resolution and reporting uncertainty for each reading Measurement Uncertainty (MU) 2
J Definition Accuracy and Resolution in a Measurement System: What are the differences? Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 12
Hershal Congratulations L-A-B and PJLA - Signatory status - ILAC Resolution GA12.03 General Measurement Device and Calibration Topics 0
D The Origin of the 10:1 Resolution Ratio for Measurement Equipment General Measurement Device and Calibration Topics 17
C Can someone clarify "Resolution", "Discrimination" and "ndc"? General Measurement Device and Calibration Topics 4
C Are Customer Specifications Too 'Tight'? Gage Resolution and Gage R&R Issues Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
C Gage Resolution / Measurement Accuracy - Laser scan micrometer has a 6 digit display General Measurement Device and Calibration Topics 4
M Resolution question - Measuring a product on a CMM - the tolerance is .000/.001 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
R Micrometer resolution for calibrating thread plug gages General Measurement Device and Calibration Topics 7
M Problem resolution for Common Causes.. Misc. Quality Assurance and Business Systems Related Topics 4
J TFRR - What is actually required to be TEST FAILURE RESOLUTION REPORT Various Other Specifications, Standards, and related Requirements 2
Marc Definition PRR - Problem Reporting and Resolution - Production Readiness Review Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 5
P Measurement Resolution of In-Process Automated Inspection System - Stamping House Inspection, Prints (Drawings), Testing, Sampling and Related Topics 13
E Cpk's, specifications and tiny sd's - Resolution of measurement equipment Capability, Accuracy and Stability - Processes, Machines, etc. 20

Similar threads

Top Bottom