Results of the ASQ CSSBB Exam March 07 2015

W

wildcat788

#1
Anyone who took the ASQ CSSBB exam on March 07 2015, did you receive the results yet? I was told that the results will be posted in a week
 
Elsmar Forum Sponsor
E

egy9090

#2
Hi
Not yet
it's always next friday, i mean 6 days after exam
i guess it will be tomorrow
hope us all success
 
C

CertifiedDataJunkie

#3
ASQ has shortened the turnover time over the years, but I would start looking again on Wednesday afternoon (18 March 15) when the timeframe of 7-10 days is reached. I have never seen the records updated over the weekend, and usually the weekend is quiet at ASQ. Even if results are obtained in a week, it takes a couple of days to update the online records.
 
W

worldboss

#6
I spoke to someone in ASQ - The BOK has been revised and since this is the first time it is being administered a committee needs to meet and determine the cut off score (different from scaled scores). This is a two day event. and results should be out by the 19th of this month.

Can you all post to this page immediately when you get results? I definitely would.

Thanks,
World Boss
 
C

CertifiedDataJunkie

#7
The BOK has been revised and since this is the first time it is being administered a committee needs to meet and determine the cut off score ...
Good to know. I am waiting for results of a different exam, but really didn't expect to see much until tomorrow. It's funny there is no "chatter" in the ASQ "Communities." It used to be a focal point for this type of conversation about the pain of waiting for results.
 
V

vollEngineer

#9
Hit up the ASQ chat and ask them whats going on, link on their home page
I just looked and can't find anyone over there on ASQ.org commiserating. So I'm wallowing alone with the three people waiting for their news over here. Sigh. I tell myself (since I didn't start studying early enough) that at least there is still hope until I get that darn email. Philosophical, no?
 
Thread starter Similar threads Forum Replies Date
S ASQ CQE (Certified Quality Engineer) June 2009 Results Professional Certifications and Degrees 11
C ASQ 06/03/2006 SSGB Exam Results - I passed! Professional Certifications and Degrees 2
K Results of the March ASQ CQM/OE test Professional Certifications and Degrees 13
O March 5, 2005 ASQ Exams - Anybody get their test results yet? Professional Certifications and Degrees 20
T IATF 16949 Recording inspection results IATF 16949 - Automotive Quality Systems Standard 2
E Raw data retention for Diagnosis Results EU Medical Device Regulations 4
lanley liao How to understand this words that the planning of internal audit shall take into consideration the results of previous audits? Oil and Gas Industry Standards and Regulations 10
Nihls When the MSA results show no operator influence Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
Q IATF audit - Root Cause Analysis results IATF 16949 - Automotive Quality Systems Standard 5
P Ppk results shown as asterisk after the transformation of Non-normal data Using Minitab Software 4
S Documenting Design Verification Test Results (ISO 9001) Design and Development of Products and Processes 1
A MSA results differences - Supplier results vs. My results Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
J Audit Finding For Not Retaining Test Results ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
F ISO 17025:2017 Clause 7.7 Ensuring the validity of results - Threshold ISO 17025 related Discussions 9
P AS9102 Form 3 Dimension Results Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
H Graphical analysis of results - Confidence level bands nomenclature Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
G What information to put on measurement Dimensional Results APQP and PPAP 7
A Calibration Certificate Results General Measurement Device and Calibration Topics 3
F Measurement Audit and ILC for ISO 17025 Clause 7.7.2 - Comparison with results of other laboratories ISO 17025 related Discussions 0
KCalaba21 ISO 9001:2015 6.2.2 E - "e) how the results will be evaluated." ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
S AS9100D PEAR - Examples for organization's method for determining process results? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
shimonv Referring to previously submitted biocompatibility results in a new 510(k) submission Other US Medical Device Regulations 1
J ISO 17025 - Please share a sample procedure for monitoring the validity of results ISO 17025 related Discussions 1
A Acceptance p-value for linearity and bias analysis in minitab results Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 0
Marc European universities dismal at reporting results of clinical trials - 2019 Other Medical Device Regulations World-Wide 0
T Final process capability results - What I am supposed to present? Cp and CpK? APQP and PPAP 11
V Recording CMM dimensional results on CFG-1003 APQP and PPAP 3
Prashant G AS9100 Requirement - Verification of characteristics results with drawing requirements AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 13
A Supplier Audit Results - when do you prepare? General Auditing Discussions 10
U ISO 17025:2017 Clause 7.7 Ensuring the Validity of Calibration Results ISO 17025 related Discussions 6
M FDA News FDA Safety communication – Interim Results of Duodenoscope Reprocessing Studies Conducted in Real-World Settings Medical Device and FDA Regulations and Standards News 0
A Definition Intended Results - What does "Intended Results" mean? Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 4
G ANOVA GR&R: Minitab vs AIAG MSA results Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
G ISO 9001:2015 - Management Review 9.3.2 c) 5) - Monitoring and Measurement Results ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
R Tensile Test Strain Rate - Impact on the Test Results Manufacturing and Related Processes 3
K Taguchi Experiments for Factorial Design Analysis - Reliability of Minitab Results Using Minitab Software 1
B How to interpret Grindometer Gage R&R Results Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
J What results need to be defined in IATF 16949 Clause 8.3.4 IATF 16949 - Automotive Quality Systems Standard 3
C Leveraging previous results in IQOQs - Environmentally Controlled Room 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
W MR Inputs (9.3.2) - "Monitoring and Measurement Results" vs. "Process Performance" Management Review Meetings and related Processes 8
S Is it mandatory to provide the results of the validation report in handwriting? ISO 13485:2016 - Medical Device Quality Management Systems 5
Ajit Basrur CDRH Customer Satisfaction Results at 87% US Food and Drug Administration (FDA) 1
T Results from conducting a Capability Studies Statistical Analysis Tools, Techniques and SPC 4
V CMQ/OE exam results - March 7 2015 Professional Certifications and Degrees 10
T OES Global Results Drift Quality Manager and Management Related Issues 1
Ron Rompen Quick question on results of Student-t test Statistical Analysis Tools, Techniques and SPC 7
G Interpreting Type 1 MSA (Measurement Systems Analysis) Results Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
L Release of Audit Results Report to 3rd Party ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
M ANOVA for S/N ratio gives different results Statistical Analysis Tools, Techniques and SPC 5
V Analysing Results after DOE Using Minitab Software 1

Similar threads

Top Bottom