RoHS Legislation - Who's doing what, and how far down the line are you

P

p1stonbroke

#1
The RoHS directive is Environmental legislation aimed at reducing the amount of hazardous materials used in electronic products - It covers Lead, mercury, cadmium, hexavalent chromium and specific flame retardants (PBB and PBDE), requiring a wide range of product types sold on the European market to be virtually free of these materials (to aid recycling and reduce nasties getting into the environment).

To any organisation manufacturing electronic or electrical equipment that is to be sold into the E.U (and other areas), the current and future status of products covered by RoHS (or RoHS-like) legislation will be of great importance. If product containing the restricted materials is released onto the market , then prosecution and a possible unlimited financial penalty may follow.

The deadline for compliance of our products is 01 July 2006, which is not very far away at all

Some links below give some additional information.

http://www.cfsd.org.uk/seeba/Europe/RoHS Fact Sheet.htm

And California's own equivalent legislation:

http://www.ciwmb.ca.gov/electronics/act2003/

There's also a 'China RoHS' but that's been put back six months......

So the question is, who's doing what, and how far down the line are you... are you finding obsolescense a problem, are smaller suppliers going to get buried?

I am getting heavily involved in this (currently working for an organisation manufacturing test and inspection equipment) and the more that I focus on the RoHS directive, the bigger a job it becomes..... :mg:
 
Elsmar Forum Sponsor
D

David Hartman

#2
The biggest problem that we are having is getting all of our components in RoHS compliant form (some of the major component manufacturers are still working on their product lines).

We believe that we have a process that is capable (has been tested on some test boards), but are unable to validate Pb-free / RoHS compliant product reliability until we can build a completely RoHS compliant product.

We are an OEM for electronic motor controls and drives.
 
F

Frank Trott

#3
The company that I work for is pretty well advanced as we supply into many distribution companies. Our products have been compliant since the beginning of January. We still have some minor outstanding issues such as the use of lead as a lubricant in the manufacture of VX grade pvc, but in the main we have full compliance. We broke down every part that we sell to its constituent part numbers, verified materials used in the processing and manufacture, modified drawings, carried out tests and then used the First Off system to verify the introduction of changes. All stores stock has been segregated and we are now debating the issue of piece part and finished goods obsolescence.

One of the stupid things with the RoHS Directive is that there is no really managed introduction in that you have a fixed date for compliance rather than comply when stock is rotated (I have been informed that this was due to Swedish objections during drafting). This means that businesses need to decide what to do with product that does not conform, you will not have a buyer (unless used for maintenance/repair) and therefore the product that was one day good will be of nouse or value. In effect you will be throwing good product into the bin to satisfy a piece of legislation designed to save the planet.

Frank Trott
 

Al Rosen

Staff member
Super Moderator
#4
Frank Trott said:
The company that I work for is pretty well advanced as we supply into many distribution companies. Our products have been compliant since the beginning of January. We still have some minor outstanding issues such as the use of lead as a lubricant in the manufacture of VX grade pvc, but in the main we have full compliance. We broke down every part that we sell to its constituent part numbers, verified materials used in the processing and manufacture, modified drawings, carried out tests and then used the First Off system to verify the introduction of changes. All stores stock has been segregated and we are now debating the issue of piece part and finished goods obsolescence.

One of the stupid things with the RoHS Directive is that there is no really managed introduction in that you have a fixed date for compliance rather than comply when stock is rotated (I have been informed that this was due to Swedish objections during drafting). This means that businesses need to decide what to do with product that does not conform, you will not have a buyer (unless used for maintenance/repair) and therefore the product that was one day good will be of nouse or value. In effect you will be throwing good product into the bin to satisfy a piece of legislation designed to save the planet.

Frank Trott
Some one will get stuck and it will still not do any good until stock is depleted.
 
C

Chris Harden

#5
One thing to keep in mind is that spare parts for equipment manufactured before July 1, 2006 will not have to be compliant.

Therefore much of the current non-compliant stock can be used for spare parts or for non-RoHS markets.

That said the smart companies will phase to compliant products and not try to track a compliant and noncompliant product line.

Chris Harden

MDSMap-Tetra Tech
 
Q

qualitygoddess - 2010

#6
We are all set with RoHS compliance. It took about 8 months of babysitting 10 hours a week, but I finally converted all the bills of material to RoHS, and our contract manufacturer has converted their lines to lead-free. We're just a small business, so I can imagine the big ones are still working it.

I found a huge disparity in the way the component suppliers communicated the RoHS compliance of their products. I had to treat each one as a separate entity and make a lot of phone calls when I could not find what I wanted on websites.

--QG
 

ScottK

Not out of the crisis
Staff member
Super Moderator
#7
Upon starting this job about 2 months ago I inhertied the RoHS compliance.
Before I started, the company got a jump on RoHS by hiring a consulting firm to work on the details. As a result we have a blanket statement that we send to customers stating that all product manufactured in this facility is RoHS compliant.

the question is... would this blanket statement fly with you?

Most of our customers accept it. Some, however, insist on more detail.
One in particular wants us to complete a fairly involved spreadsheet for the product we sell them broken down into component parts. That's a lot of work... especially if said customer only places one or two small orders a year.
 
Last edited:
M

mshell

#8
We are seeing the same thing. We manufacture dome enclosures for the security industry and I have just finished completing material declaration letters for the paint, stainless steel and gold used to coat the domes.
 
M

M Greenaway

#9
If you had to stand up in court and demonstrate due dilligence as a defence for shipping unknowingly RoHS non-compliant products do you think that your piece of paper from your supplier would help your defence ?

There is a certain onus on you within your position in the supply chain to not take declarations of compliance at face value unless you are very sure of the source.

i.e. a declaration such as this from RS Components might be taken at face value, however such a declaration from Billy Bodgits Electronics in Taiwan might require further delving.
 

ScottK

Not out of the crisis
Staff member
Super Moderator
#10
M Greenaway said:
If you had to stand up in court and demonstrate due dilligence as a defence for shipping unknowingly RoHS non-compliant products do you think that your piece of paper from your supplier would help your defence ?

There is a certain onus on you within your position in the supply chain to not take declarations of compliance at face value unless you are very sure of the source.

i.e. a declaration such as this from RS Components might be taken at face value, however such a declaration from Billy Bodgits Electronics in Taiwan might require further delving.
I understand what you're saying, but is this not the same as accepting a boilerplate C of C from a supplier?

I can understand that if we are a new supplier that they may want more than a declaration, but what of customers one has done business with for years?

all these regs kind of undermine supplier/customer trust... but that's a whole other issue.
 
Thread starter Similar threads Forum Replies Date
M Find updates to REACH and Rohs regulations REACH and RoHS Conversations 1
I When is necessary to have RoHS declaration on non-electrical parts? REACH and RoHS Conversations 1
T Training recommendations? Bringing our RoHS and REACH compliance efforts in-house REACH and RoHS Conversations 2
G RoHS Procedure REACH and RoHS Conversations 2
Marcel DS How do I know if my product is required be RoHS certified? REACH and RoHS Conversations 6
C Difficulties getting RoHS/REACH for cheap parts RoHS, REACH, ELV, IMDS and Restricted Substances 1
M Informational RoHS Standard - EN 63000:2018 to replace EN 50581:2012 Medical Device and FDA Regulations and Standards News 11
R ROHS Exemption Declarations REACH and RoHS Conversations 5
M ROHS : Applicability for AIMDs RoHS, REACH, ELV, IMDS and Restricted Substances 2
J Where can I find the latest update to Reach and ROHS? REACH and RoHS Conversations 9
padraick63 REACH and ROHS Requirement for a Molded Part REACH and RoHS Conversations 1
R Certificate of compliance to RoHS/REACH/WEEE - any such animal? REACH and RoHS Conversations 18
T China ROHS exemptions - Are there any exemptions for ROHS 2 China? REACH and RoHS Conversations 0
D The Status of ROHS for Medical Devices - April 2019 REACH and RoHS Conversations 3
Ed Panek CE REP questions about our devices ROHS compliance REACH and RoHS Conversations 1
R REACH and ROHS compliance for hundreds of parts made over 25 years REACH and RoHS Conversations 3
S Prop 65 and RoHS statement REACH and RoHS Conversations 6
J What my companies RoHS declaration should say 2011/65/EU, 2015/863, or 2017/2102 REACH and RoHS Conversations 3
bio_subbu EU Publishes New DIRECTIVE (EU) 2017/2102 AMENDING 2011/65/EU ON ROHS-2 REACH and RoHS Conversations 0
T CE Marking & Compliance to MDD, EMC, RoHS, and GPSD REACH and RoHS Conversations 4
D How do I show compliance to RoHS, REACH and Conflict Minerals? REACH and RoHS Conversations 6
J RoHS, WEEE and REACH Consulting Expertise Needed REACH and RoHS Conversations 4
P Necessary Compliance Documentation for RoHS and REACH REACH and RoHS Conversations 5
Q Guidance regarding Legally Refurbishing a Non-RoHS Instrument in the EU REACH and RoHS Conversations 1
M ROHS & REACH in TEFLON Material - NABL Testing Laboratories REACH and RoHS Conversations 1
S Sell a Non-RoHS device, manufactured before RoHs regulations became effective? EU Medical Device Regulations 2
Q EU ROHS and GUI Usability Trial Requirements EU Medical Device Regulations 10
M RoHS Directive - Supplier Compliance - Declaration of Conformance CE Marking (Conformité Européene) / CB Scheme 12
dubrizo Who handles Your Reach, RoHS, 3TG Compliance RoHS, REACH, ELV, IMDS and Restricted Substances 9
smryan Compliance Officer Outsourcing? RoHS, REACH, ELV, GADSL, IECSC Other ISO and International Standards and European Regulations 5
B RoHS Directive 2014/5/EU Leaded Solder Exemption RoHS, REACH, ELV, IMDS and Restricted Substances 2
bio_subbu Official Journal of EU published two new RoHS Exemptions EU Medical Device Regulations 1
A RoHS compliance - Our market is non EU countries only ISO 13485:2016 - Medical Device Quality Management Systems 4
D Will A Few Failed Solder Joints Make Me RoHS Non Compliant? RoHS, REACH, ELV, IMDS and Restricted Substances 9
L IOS-MAT-0010 vs REACH/ROHS RoHS, REACH, ELV, IMDS and Restricted Substances 2
P Must all parts of a product be RoHS compliant? EU Medical Device Regulations 5
N RoHS Compliance requirement for Hexavalent Chromium RoHS, REACH, ELV, IMDS and Restricted Substances 6
R RoHS Compliance Problem with One Component RoHS, REACH, ELV, IMDS and Restricted Substances 5
J RoHS Components with Lead Exemptions (Capacitors on a PCB) RoHS, REACH, ELV, IMDS and Restricted Substances 11
B Query on Medical Device Electronics RoHS Certificate Statement RoHS, REACH, ELV, IMDS and Restricted Substances 3
R RoHS Medical Devices: Application to Accessories, Components and Non-EE parts CE Marking (Conformité Européene) / CB Scheme 10
M Finding a hardware supplier/distributor compliant with RoHS RoHS, REACH, ELV, IMDS and Restricted Substances 1
D ROHS 2 - Medical Device: Placing vs Making Available on the market EU Medical Device Regulations 3
R RoHS and placing on the market in Non EU countries RoHS, REACH, ELV, IMDS and Restricted Substances 3
S RoHS Conformity Risk Assessment - Medical Devices RoHS, REACH, ELV, IMDS and Restricted Substances 2
S RoHS Directive 2011/65/EU Revision ? Medical Devices - 22nd July 2014 CE Marking (Conformité Européene) / CB Scheme 30
J RoHS-Non RoHS Multifunctional Workbench RoHS, REACH, ELV, IMDS and Restricted Substances 1
M RoHS CE Mark - Medical Devices built for US before 22 July 2014 ISO 13485:2016 - Medical Device Quality Management Systems 3
L What needs to be done to prove compliance with RoHS and WEEE EU Medical Device Regulations 5
A Start Compliance to RoHS, SCHV and REACH RoHS, REACH, ELV, IMDS and Restricted Substances 10

Similar threads

Top Bottom