Rolled Throughput Yield - Is anyone using this metric, and if so, how

Elsmar Forum Sponsor

Al Rosen

Holed-up in a Hotel in South Florida
Staff member
Super Moderator
#2
How do you record the data now? It seems simple enough to setup in excel. What am I missing?
 
R

RosieA

#3
We're adding a tracking sheet to routers and then picking off the data we want and loading it into Excel.

Without a major router redesign, I don't know how else to capture the data we need.

Just wondering if anyone else has come up with a better, less manual method.
 

Al Rosen

Holed-up in a Hotel in South Florida
Staff member
Super Moderator
#4
RosieA said:
We're adding a tracking sheet to routers and then picking off the data we want and loading it into Excel.

Without a major router redesign, I don't know how else to capture the data we need.

Just wondering if anyone else has come up with a better, less manual method.
I don't know what you have available as far as technology, but if you could have the operators or inspectors enter the data at a computer directly, you can eliminate the extra paper.
 
R

RosieA

#5
Ya, that would make sense. However this is a metal working plant and we do not have computers in-process. (We did once have a PC in the Heat Treat office so they could enter SPC data right into the system, but it disappeared during third shift on the first day it was installed) :rolleyes:

So I guess I'm doomed to paper tracking, but I'd still like to hear how others are doing this...maybe something someone else is doing will trigger a good idea here.
 
Thread starter Similar threads Forum Replies Date
P Is throughput yield the same as FPY or FTY? Rolled Throughput Yield Manufacturing and Related Processes 3
B How RTY (Rolled Throughput Yield) applies to different industries Manufacturing and Related Processes 1
F Rolled Throughput Yield and Confidence Interval Six Sigma 3
E Normalized vs. Rolled Throughput Yield - First Pass Yield metrics for our processes Manufacturing and Related Processes 16
N Definition TDU (Total Defects per Unit) and RTY (Rolled Throughput Yield) Definitions Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 5
H Rolled Throughput Yield (RTY) Loss - Can you measure in PPM? Six Sigma 3
S RTY (Rolled Throughput Yield) - Use Poisson Distribution Calculation Quality Tools, Improvement and Analysis 4
H Rolled Throughput Yield (RTY) Calculations for a Sequential Process Six Sigma 2
B How to define and Calculate the DPU, DPMU, DPMO, Yield, Rolled Throughput Yield (RTY) Manufacturing and Related Processes 3
S DPMO (Defects Per Million Opportunities) vs. RTY (Rolled-Throughput-Yield) Six Sigma 7
L RTY (Rolled Throughput Yield) Calculation Other ISO and International Standards and European Regulations 4
Bev D World Class Rolled Throughput Yields - 2012 Six Sigma 1
J SST .625 dia Cold Rolled 303 bar and Magnetism Manufacturing and Related Processes 6
L Wearing an ESD Smock with Rolled Up Sleeves Misc. Quality Assurance and Business Systems Related Topics 4
R How to determine the Thickness tolerance of the Cold Rolled Steel Manufacturing and Related Processes 6
B Hot Rolled Steel Coil Rust Prevention Tests Manufacturing and Related Processes 3
P Trying to figure Minor ? on Female Rolled Threads Various Other Specifications, Standards, and related Requirements 1
G How do I calculate PPM from a Rolled Wire Suppllier Supplier Quality Assurance and other Supplier Issues 3
A Ovality and Flatness generated after Heat Treatment of Rolled Rings Manufacturing and Related Processes 3
D Herringbone Defect Condition in Rolled Steel Misc. Quality Assurance and Business Systems Related Topics 3
F Technical question - U-BOLT microscopic cracks on the tooth of the rolled thread Manufacturing and Related Processes 14
C Standard for surface roughness on hot rolled steel Manufacturing and Related Processes 2
J How to Define Scrap Metrics & Objectives - Stamped Cold Rolled Steel Fasteners ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
E NCR (Nonconformance Report) for device defects - Hot rolled coils Nonconformance and Corrective Action 1
K Resistance welding process - Cold rolled and some zinc plated welding Various Other Specifications, Standards, and related Requirements 2
K Resistance Welder Settings for cold rolled and galvanized steel Manufacturing and Related Processes 3
apestate Tolerances for cold rolled, hot rolled, DOM tubing Other ISO and International Standards and European Regulations 10
D Flatness tolerances for tempered cold rolled stainless steel coils Manufacturing and Related Processes 3
K Definition Throughput - Definition and Calculation Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 1
L Definition Throughput Yield (TPY) or First Pass Yield Calculation - Help Needed Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 3
F Throughput time measurement Cpk summary Capability, Accuracy and Stability - Processes, Machines, etc. 2
B Calculating Throughput Yield or Yield Six Sigma 10
P How Do I Measure Productivity? Throughput yield? OEE measures? Misc. Quality Assurance and Business Systems Related Topics 3
E 21 CFR 211.103 Calculation of Yield Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 5
R Yield Plot for different groupings Using Minitab Software 3
N Accurate calculations of First Time Quality / First Time Yield Misc. Quality Assurance and Business Systems Related Topics 3
P Any official doc/spec on different types of Yield calculation? Manufacturing and Related Processes 0
F Yield reaction higher than 100% Manufacturing and Related Processes 3
Q Validation of Predictive Models of Yield Statistical Analysis Tools, Techniques and SPC 19
B Machine Shop Yield and Cost - Productivity, Yield and Absorption Performance Manufacturing and Related Processes 3
T First Pass Yield - Welding Process Improvement Manufacturing and Related Processes 3
B How to begin tracking FPY (First Pass Yield) and "Downtime" tracking Manufacturing and Related Processes 3
B Calculation of First Pass Yield (FPY) Six Sigma 9
V Monitoring Specific Reasons and Categories of Yield Loss of Online Rejects ISO 13485:2016 - Medical Device Quality Management Systems 1
D Defining Yield Rate Targets for different Manufacturing Processes APQP and PPAP 2
R First Pass Yield - Am I doing correct the First Pass Yield Metric Quality Tools, Improvement and Analysis 2
S How to Calculate Overall FPY (First Pass Yield) Quality Tools, Improvement and Analysis 2
F First Pass Yield Helped Requested Lean in Manufacturing and Service Industries 1
Q Machine Shop Yield & Sampling Plan Inspection, Prints (Drawings), Testing, Sampling and Related Topics 15
M Correlation between 2 Variables - Potential X's that might affect yield percentage Quality Tools, Improvement and Analysis 5
Similar threads


















































Top Bottom