Run Charts - Plots of process characteristics against time or sequence

Marc

Hunkered Down for the Duration
Staff member
Admin
#1
I admit ignorance in matters of Run Charts.

1. Does one compute control limits for run charts? If so, what is the basic methodology?

2. What is the intent (Value? Role?) of a run chart?

[This message has been edited by Marc Smith (edited 11 July 2000).]
 
Elsmar Forum Sponsor
J

Jim Biz

#2
Run charts are simply plots of process characteristics against time or in chronological sequence. They do not have statistical basis, but are useful in revealing
trends
relationships between variables


Check out this site for Run chart details -
http://lorien.ncl.ac.uk/ming/spc/spc0.htm

Regards
Jim

[This message has been edited by Jim Biz (edited 11 July 2000).]
 

Marc

Hunkered Down for the Duration
Staff member
Admin
#3
Thanks. That's pretty much as I understood them - just a 'view' of a process trend. But - I still don't understand how control limits would be computed.
 
J

Jim Biz

#4
IMHO "computed limits" should in most cases not be part how they are used. Although a reasonable upper or lower "Goal" could be "chosen" depending on the variables interaction within a given timeframe. They can however be used to pass information along to the interested party.... Example If I change "A" what happens to "B" and how long does any change take to show an effect.

Regards
Jim
 
Thread starter Similar threads Forum Replies Date
B IMR or Individual Run SPC Charts In Minitab Using Minitab Software 3
C Microsoft Access Database for In-Process Run Charts Quality Assurance and Compliance Software Tools and Solutions 4
T What is Average Run Length & Average Production Length when used in Control Charts? Statistical Analysis Tools, Techniques and SPC 4
P Short Run Charts - Sample size N=1 Statistical Analysis Tools, Techniques and SPC 2
J Run Charts and Alternative Process Control Parameters Statistical Analysis Tools, Techniques and SPC 5
K Short run Z-bar & W charts - Can anyone tell me the formula used? Statistical Analysis Tools, Techniques and SPC 9
M Multivariable Control Chart - Target, Short Run, Group charts, T2, etc. Statistical Analysis Tools, Techniques and SPC 10
L Significant Production Run - How 300 was determined to be the minimum quantity APQP and PPAP 2
V Supplier wants to perform pre-qualifications prior to every run instead of locking in parameters. Supplier Quality Assurance and other Supplier Issues 7
I New to LEAN but not to Quality - How to run Kaizen events Lean in Manufacturing and Service Industries 1
J Sample size definition in an Automotive SMT pilot lot run Misc. Quality Assurance and Business Systems Related Topics 1
M Has anyone heard of Run at Risk? Manufacturing and Related Processes 15
F Bayes Success run Theorem for sample size during OQ&PQ Qualification and Validation (including 21 CFR Part 11) 4
E Translating from Automotive to Medical Device industry - [email protected] Other Medical Device Related Standards 2
Q How to run a Management Review Management Review Meetings and related Processes 10
M Informational Team-NB published a press release regarding the survey run among its members to analyse the certificates being issued Medical Device and FDA Regulations and Standards News 0
M What is required to run human clinical trials in France EU Medical Device Regulations 9
M Case study - If the restaurant (ISO 9001:2015 certified) was run by 2 persons covering cooking and purchasing processes (Mother and Father) supported ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
S Designing the experiment with minimum run Statistical Analysis Tools, Techniques and SPC 0
S Designing the experiment with minimum run Statistical Analysis Tools, Techniques and SPC 0
U Run & rate for bulk materials IATF 16949 - Automotive Quality Systems Standard 6
N Can you use parts from Run at Rate to use in your PPAP? APQP and PPAP 4
L Formulas to be able to answer these Run Chart questions Statistical Analysis Tools, Techniques and SPC 7
R What testing would you run to determine if a device is "Clean"? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
J Design Control - Can Validation be based on a limited/first Production Run ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
W AS9100 Clause 8.5.1.3 Production Run Verification AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 14
V When and How to apply the Bayes Success Run approach for Sample Size Determination Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
T Supplier Sample Run Rejection ISO 13485:2016 - Medical Device Quality Management Systems 3
I Run a batch every year to revalidate the validated condition? Qualification and Validation (including 21 CFR Part 11) 4
P SPC Short Run Advice of a Stamping Process Statistical Analysis Tools, Techniques and SPC 3
W AS9100C registration - How long does the system have to run before initial audit? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 9
B Bayes Success-Run on Attribute Data - Determining Sample Size Statistical Analysis Tools, Techniques and SPC 2
M Standardized P Chart for Short Run Production Statistical Analysis Tools, Techniques and SPC 13
B How to Demonstrate Stability and Repeatability in very Short Run Process AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 10
Y Resin Use - Engineering Run to GMO run for the same Product US Food and Drug Administration (FDA) 1
M Setup Time vs. Economic Run Quantity Manufacturing and Related Processes 1
D What to look for in a well run Injection Molder Manufacturing and Related Processes 11
E What's the difference: AIAG-PPAP's "Significant Production Run" and "Run @ Rate"? APQP and PPAP 11
S Should PPAP Samples Come from a Production Run? APQP and PPAP 3
F Run Minitab Macro from Excel Using Minitab Software 3
E How to run an OLS or Logistic Regression when I have Panel Data in Minitab Using Minitab Software 1
W Production Trial Run in AIAG APQP and Run at Rate (GP-9) GM 1927 APQP and PPAP 2
M Average Run Length (Student Question) Statistical Analysis Tools, Techniques and SPC 3
D IMR (Individuals and Moving Range) Chart for Short-Run SPC - How much data to include Statistical Analysis Tools, Techniques and SPC 1
R What is a "DNOM Chart" in reference to Short Run SPC? Statistical Analysis Tools, Techniques and SPC 2
E Using ANOVA during the PQ Validation Run to evaluate Statistical Differences Statistical Analysis Tools, Techniques and SPC 4
CalRich Retention of First Piece from each Production Run IATF 16949 - Automotive Quality Systems Standard 11
M 7.5.1.3 Should mentioned examples such as initial run be verified or validated? IATF 16949 - Automotive Quality Systems Standard 1
J How to run a Survival Analysis in Minitab Using Minitab Software 13
V Supplier's First Run had Plating Problems - Can they Strip, Re-Plate and PPAP them? APQP and PPAP 14

Similar threads

Top Bottom