SAE AMS 2175 Radiographic Report of Casting

S

StorkSPA

#1
My supplier is currently sending the X-Ray photo's of aluminium castings accompanied by a CofC that states the x-ray inspection was carried out. Instead, I would like a thorough report on issues found by their level 3 specialist (beyond the requirements of para 4.4 of the spec). Reason for this is that we sometimes find non-conformities when we process the castings, and need to verify if the found non-conformity was addressed.
Is there a standard format that is normally used for reporting x-ray inspections, that clarifies the found non-conformities per kind of deviation (eg gas, enclosure), severity, and area where the non-conformity is found?
 
Last edited by a moderator:
Elsmar Forum Sponsor
S

Sorin

#2
Something like this?

NB: Outline only....not the real form

Edit: To answer your original question. You may want to look in ASTM-E1742, para 6.27.2 and 6.27.8.
Also, keep in mind that you may express, as part of the contract, the need for additional data to be submitted (even if the required data exceeds a standard requirement)
 

Attachments

S

StorkSPA

#3
Sorin,

Thanks, this seems to be what we need. Area's where non conformities are found could easily be added (eg by referring to drawing coordinates). Is your example representing the spec? Otherwise, is a copy that represents the spec available?
 
S

Sorin

#4
Sorin,

Thanks, this seems to be what we need. Area's where non conformities are found could easily be added (eg by referring to drawing coordinates). Is your example representing the spec? Otherwise, is a copy that represents the spec available?
Is the form that we are using for our parts, and 90% of our parts are inspected per AMS2175 / ASTM E1742 (Xray).
 
S

StorkSPA

#5
Thanks, Sorin. We'll use this as an example for our supplier. With a few adaptions (drawing location, critical area) I think it will suit our needs.
By the way, do you have a copy in word and are you willing to share that as well?
Regards,
Floris
 
Last edited by a moderator:
S

Sorin

#6
Thanks, Sorin. We'll use this as an example for our supplier. With a few adaptions (drawing location, critical area) I think it will suit our needs.
By the way, do you have a copy in word and are you willing to share that as well?
Regards,
Floris
I am sorry that I cannot help you with a word copy. Most of our forms are done using this software:

http://formdocs.com/

And I cannot export to doc....
 
S

StorkSPA

#7
Ok, thanks very much for your efforts, Sorin. Anyway the typing isn't that much.
Meanwhile we discussed within our team and decided we will ask our supplier to work out a format that suits both our needs - using your form as an example. That way the typing is done where it should be, and the supplier has a chance to put in his own expertise. No use forcing someone else's forms down their necks!
Once again thanks, because you put me on the right track with the form and reference to applicable paragraphs in the spec - the supplier does not have much ground to refuse a good report anymore, based on those paragraphs.
 
S

StorkSPA

#9
Thanks, this makes sense. The extra information is definitely nescesary to confirm that parts were accepted.
 
Thread starter Similar threads Forum Replies Date
B Determining SAT Offsets vs TUS Offsets per SAE AMS 2750E AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
M SAE-QQ-A-250/11A has been superseded by SAE-AMS-4027N AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
M SAE AMS 2750E Relocation Hot or Cold Recording Sensor Manufacturing and Related Processes 1
S SAE AMS 2750 rev E - Changes Matrix? Manufacturing and Related Processes 13
P Standards Subscription - Online web site that provides AMS, NAS, SAE etc, standards Various Other Specifications, Standards, and related Requirements 1
D SAE AMS 2750D - Pyrometry - Heat Treating procedure wanted Reliability Analysis - Predictions, Testing and Standards 12
D SAE AMS 2750D - Pyrometry - Heat Treating - Does anyone know of a good class? Training - Internal, External, Online and Distance Learning 5
J SAE J1739 standard IATF 16949 - Automotive Quality Systems Standard 2
S SAE AS13004 vs. SAE J1739 - What are the main differences? FMEA and Control Plans 0
L Proof of Concept Studies - Do we need to comply with SAE reporting? Medical Device and FDA Regulations and Standards News 3
L SAE AS9145 vs. SAE AS6500 (Manufacturing Management Program) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
P Material selection - How do we select a raw material? Bolt made of SAE J994 grade 2 Customer and Company Specific Requirements 3
N Database (Like ASSIST) to subscribe to & have access to new SAE-AS & ANSI standards Various Other Specifications, Standards, and related Requirements 2
S SAE AS9015 Supplier Self Verification Process - Delegation Programs. AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
M SAE AS 9101 Rev D and E Comparison wanted - March 2014 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
G Sampling Plan according to SAE ARP9013 C=0 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
kedarg6500 CA111-SAE Copper Washer Hardness Measurement Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
E SAE-AS8879 Threaded Hole Gaging - .4375UNF-3B and .4375-UNJF-3B Inspection, Prints (Drawings), Testing, Sampling and Related Topics 15
V What should I require of a Heat Treat PPAP? Surface Hardness per SAE J664 APQP and PPAP 1
B SAE AS81914 - Convoluted Tubing Tensile Stress Various Other Specifications, Standards, and related Requirements 5
S Differences between the SAE AS9100C and BS EN AS 9100:2009 versions of the standard AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
Ron Rompen SAE J1677 - 5.2 (Reverse Flattening Test) and how it should be carried out Various Other Specifications, Standards, and related Requirements 1
bio_subbu New MEDDEV Guidance Documents - Clinical investigations and SAE Reporting EU Medical Device Regulations 3
Wes Bucey SAE Virtual Job Fair - May 19, 2010 Career and Occupation Discussions 2
Sidney Vianna AAQSC - Americas Aerospace Quality Standards Committee of the SAE Aerospace Council AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
N Measurement and Inspection of SAE J-1926 O-Ring Ports Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
F Spring Steel Wires - JIS 3560, DIN 17223 & SAE 9254 (JIS G 3561) Manufacturing and Related Processes 2
A SAE J1739 new revision published on Jan 2009 but I can't find a change summary FMEA and Control Plans 7
R Is there a Specification for safety wire installation - Aerospace, SAE or otherwise AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
Sidney Vianna SAE OASIS Database - August 2018 Status AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 17
ScottK Rubber O-Ring Inspection Standard - SAE J515? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 12
A Where to Buy SAE J2340 Customer and Company Specific Requirements 4
R SAE AS8879 Interpretation - Using a Johnson Thread Gaging System Various Other Specifications, Standards, and related Requirements 1
B Grain boundary effects in alloy depletion analysis - SAE AS7101 requirement AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
M Hardness Testing - Rockwell C, on 2" OD x 1" ID Tube of SAE 4140 steel Manufacturing and Related Processes 9
R Obsolete Standards - Need J 377:1987 SAE standard, where can i get this old one? Various Other Specifications, Standards, and related Requirements 3
gard2372 Any websites or matrices to cross reference EN or DIN standards to SAE/ASME etc...? Other ISO and International Standards and European Regulations 3
M Bulk material vendor (supplier) change - PPAP resubmission? SAE J403 grade 1020 steel Supplier Quality Assurance and other Supplier Issues 6
S SAE Jrr 003 (RR-003?) - SAE J4000 - Lean Manufacturing - Status Evaluation Various Other Specifications, Standards, and related Requirements 9
O ISO 17025 and SAE J361 Question - MacBeth booth - Daylight filter was a D75 ISO 17025 related Discussions 1
G OASIS Database at a per-entry cost of $500 - SAE Money Grubbers (AS9100) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 22
A SAE fitting Gauge Point use - How do I set up to use the gauge points? Various Other Specifications, Standards, and related Requirements 0
S ISO 9001:2000 vs SAE AS9003 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
R Is the SAE's AS9100 an International standard? vs. AECMA (EN 9100) - JISQ9100 (Japan) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
apestate What Is A Machinery FMEA (MFMEA)? SAE J1739, Section 5. FMEA and Control Plans 5
B Help...need sample of SAE-ARP 5580 FMEA and Control Plans 0
A Sae J1739:2002 - Is it different from the AIAG's latest FMEA manual? FMEA and Control Plans 1
Q AMS 2750 E or F Continuous Furnace TUS Data Collection AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
J AMS 2750 E Clause3.5.17.13 TUS Pass/Fail Requirements AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
R DFARS Compliance - Purchasing Aluminum Alloy 7075 -T73511 per AMS-QQ-A-200/11 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4

Similar threads

Top Bottom