D
dbzman
Does anyone have a procedure for 2750 D?
Thanks!
Thanks!
James, unfortunately we generally do not post copyrighted specifications like that here. That way we don't get yelled at too much!
However, if you are performing services for an aerospace company, they should provide you one.
I would also think you could ask your inspector who could get you one.
James
Since the procedure has to reflect your process and product there is not a single canned one that can work. You can use the AMS to create one if you are familiar with the process. If your are hitting this a bit cold I realy recomend that you take the PRI class on prometry since it will enable you to realy understand why your are doing what is in the procedure.
Trust me when I say that they will expect you to be able to know what you are doing when it comes to TUS and the SAT checks. These are key elements of the audit.
pyrometer -
an apparatus for measuring high temperatures that uses the radiation emitted by a hot body as a basis for measurement.
TUS- temperature uniformity survey. This is where you demonstrate that the temperatures in all the locations you could place your parts durring processing are with in specification. Basicly makeing sure that there are no hot or cold spots.