SAE J1739 new revision published on Jan 2009 but I can't find a change summary

A

annnarumonp

#1
I saw new revision of SAE J1739 in sae.org web that just published on Jan 2009 but I can't find its changed summary.
1) Could you pls advise the changed summary?
2) Is it the same as FMEA 4th edition?
3) From the title of new rev, MFMEA disappeared. Where should I refer when I do MFMEA?


Thanks for your help :thanx:
ann
 
Elsmar Forum Sponsor

Stijloor

Staff member
Super Moderator
#2
I saw new revision of SAE J1739 in sae.org web that just published on Jan 2009 but I can't find its changed summary.
1) Could you pls advise the changed summary?
2) Is it the same as FMEA 4th edition?
3) From the title of new rev, MFMEA disappeared. Where should I refer when I do MFMEA?


Thanks for your help :thanx:
ann
Welcome to The Cove Forums! :bigwave: :bigwave:

FMEA 4th Edition is the same as SAE J1739. If you are responsible for performing Machine FMEA's, you can still call it MFMEA. Look for FMEA 4th Ed. changes here at The Cove Forums. Some additional searching required...

Stijloor.
 
A

annnarumonp

#3
Thanks Stijloor, I already had FMEA 4th Ed. but it didn't mention about MFMEA ranking like SAE J1739. Seem we can't rank score of MFMEA by use DFMEA or PFMEA. I attached ranking score of MFMEA, pls kindly help to advise.:bonk:
 

Attachments

Howard Atkins

Forum Administrator
Staff member
Admin
#5
If I remember correctly MFMEA was originally a Ford publication

There is no requirement in TS to perform MFMEA, you can decide on your own rankings and call it what you like
 

Stijloor

Staff member
Super Moderator
#6
If I remember correctly MFMEA was originally a Ford publication

There is no requirement in TS to perform MFMEA, you can decide on your own rankings and call it what you like
That's right Howard. In the QS-9000 days, we had a TE supplement for Tooling and Equipment suppliers for QS-9000 certification purposes. Those suppliers were expected to utilize the Machine FMEA guide book (still?) available from AIAG. Aaaah, the "good" old days...:D

Stijloor.
 
Thread starter Similar threads Forum Replies Date
J SAE J1739 standard IATF 16949 - Automotive Quality Systems Standard 2
S SAE AS13004 vs. SAE J1739 - What are the main differences? FMEA and Control Plans 0
apestate What Is A Machinery FMEA (MFMEA)? SAE J1739, Section 5. FMEA and Control Plans 5
A Sae J1739:2002 - Is it different from the AIAG's latest FMEA manual? FMEA and Control Plans 1
L Proof of Concept Studies - Do we need to comply with SAE reporting? Medical Device and FDA Regulations and Standards News 3
L SAE AS9145 vs. SAE AS6500 (Manufacturing Management Program) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
B Determining SAT Offsets vs TUS Offsets per SAE AMS 2750E AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
P Material selection - How do we select a raw material? Bolt made of SAE J994 grade 2 Customer and Company Specific Requirements 3
M SAE-QQ-A-250/11A has been superseded by SAE-AMS-4027N AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
N Database (Like ASSIST) to subscribe to & have access to new SAE-AS & ANSI standards Various Other Specifications, Standards, and related Requirements 2
M SAE AMS 2750E Relocation Hot or Cold Recording Sensor Manufacturing and Related Processes 1
S SAE AS9015 Supplier Self Verification Process - Delegation Programs. AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
M SAE AS 9101 Rev D and E Comparison wanted - March 2014 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
G Sampling Plan according to SAE ARP9013 C=0 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
kedarg6500 CA111-SAE Copper Washer Hardness Measurement Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
S SAE AMS 2750 rev E - Changes Matrix? Manufacturing and Related Processes 13
E SAE-AS8879 Threaded Hole Gaging - .4375UNF-3B and .4375-UNJF-3B Inspection, Prints (Drawings), Testing, Sampling and Related Topics 15
V What should I require of a Heat Treat PPAP? Surface Hardness per SAE J664 APQP and PPAP 1
B SAE AS81914 - Convoluted Tubing Tensile Stress Various Other Specifications, Standards, and related Requirements 5
S Differences between the SAE AS9100C and BS EN AS 9100:2009 versions of the standard AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
Ron Rompen SAE J1677 - 5.2 (Reverse Flattening Test) and how it should be carried out Various Other Specifications, Standards, and related Requirements 1
bio_subbu New MEDDEV Guidance Documents - Clinical investigations and SAE Reporting EU Medical Device Regulations 3
P Standards Subscription - Online web site that provides AMS, NAS, SAE etc, standards Various Other Specifications, Standards, and related Requirements 1
S SAE AMS 2175 Radiographic Report of Casting Other ISO and International Standards and European Regulations 8
Wes Bucey SAE Virtual Job Fair - May 19, 2010 Career and Occupation Discussions 2
Sidney Vianna AAQSC - Americas Aerospace Quality Standards Committee of the SAE Aerospace Council AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
N Measurement and Inspection of SAE J-1926 O-Ring Ports Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
F Spring Steel Wires - JIS 3560, DIN 17223 & SAE 9254 (JIS G 3561) Manufacturing and Related Processes 2
R Is there a Specification for safety wire installation - Aerospace, SAE or otherwise AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
Sidney Vianna SAE OASIS Database - August 2018 Status AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 17
ScottK Rubber O-Ring Inspection Standard - SAE J515? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 12
A Where to Buy SAE J2340 Customer and Company Specific Requirements 4
D SAE AMS 2750D - Pyrometry - Heat Treating procedure wanted Reliability Analysis - Predictions, Testing and Standards 12
R SAE AS8879 Interpretation - Using a Johnson Thread Gaging System Various Other Specifications, Standards, and related Requirements 1
B Grain boundary effects in alloy depletion analysis - SAE AS7101 requirement AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
M Hardness Testing - Rockwell C, on 2" OD x 1" ID Tube of SAE 4140 steel Manufacturing and Related Processes 9
R Obsolete Standards - Need J 377:1987 SAE standard, where can i get this old one? Various Other Specifications, Standards, and related Requirements 3
gard2372 Any websites or matrices to cross reference EN or DIN standards to SAE/ASME etc...? Other ISO and International Standards and European Regulations 3
M Bulk material vendor (supplier) change - PPAP resubmission? SAE J403 grade 1020 steel Supplier Quality Assurance and other Supplier Issues 6
D SAE AMS 2750D - Pyrometry - Heat Treating - Does anyone know of a good class? Training - Internal, External, Online and Distance Learning 5
S SAE Jrr 003 (RR-003?) - SAE J4000 - Lean Manufacturing - Status Evaluation Various Other Specifications, Standards, and related Requirements 9
O ISO 17025 and SAE J361 Question - MacBeth booth - Daylight filter was a D75 ISO 17025 related Discussions 1
G OASIS Database at a per-entry cost of $500 - SAE Money Grubbers (AS9100) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 22
A SAE fitting Gauge Point use - How do I set up to use the gauge points? Various Other Specifications, Standards, and related Requirements 0
S ISO 9001:2000 vs SAE AS9003 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
R Is the SAE's AS9100 an International standard? vs. AECMA (EN 9100) - JISQ9100 (Japan) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
B Help...need sample of SAE-ARP 5580 FMEA and Control Plans 0
B Risk Management and FMEAs - IEC 60812, SRC-HDBK-1120 and SEQ-J1739 ISO 14971 - Medical Device Risk Management 3
S Changing revision status of a reviewed document Manufacturing and Related Processes 4
M Quality Manual - Where does Revision History Section go? Document Control Systems, Procedures, Forms and Templates 8

Similar threads

Top Bottom