Sample Agreement available for Outsourcing Medical Device Design activity?

A

Aphel

Involved In Discussions
#1
#1
Dear all,
I would Need Support in Setting up a contract / agreement for Outsourcing medical device design activity to Service Provider.
Any guesses for me? Thank you in advance!
Kind regards, Aphel
 
GAGEpack - Gage & Calibration Management
Elsmar Forum Sponsor
William55401

William55401

Quite Involved in Discussions
#2
#2
There is no one size fits all solution. These arrangements (and the agreement) are determined based on the parties involved and how they choose to interact with each other. Design Control is a process, interwoven with Risk Management, and the parties must decide who owns what deliverables and what level of oversight the customer has on the deliverables.
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
D Estimate Sample Size for very rare event Using Minitab Software 1
M Summative evaluation: how many sample per participant? IEC 62366 - Medical Device Usability Engineering 5
S Determining Sample Size and Method Quality Tools, Improvement and Analysis 6
C Complaint Return Sample Size Question 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
shimonv Frequency and sample size for lot release of EtO sterilized products EU Medical Device Regulations 2
X Sample SOC2 audit report (or a redacted one) IEC 27001 - Information Security Management Systems (ISMS) 0
A Clinical assessment sample size - Medical device Class IIb implantable (93/42 directive) EU Medical Device Regulations 2
M Sample record for verification performed by importers before placing a device on the market EU Medical Device Regulations 0
P Sample Size for Distribution Simulation Testing Inspection, Prints (Drawings), Testing, Sampling and Related Topics 11
E Any sample of a full software life cycle IEC 62304 report ( any class )? IEC 62304 - Medical Device Software Life Cycle Processes 4
G Where to buy Template / sample SCSMS Manual, checklist Supply Chain Security Management Systems 1
C Stress / Challenge Conditions for Design Verification Testing to Reduce Sample Size 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 11
K How can Acceptance Number and Reject Number be larger than Sample Size on Z1.4 Table? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
P MSA - what exactly mean "system" and master sample Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
J Validation Sample Size for Tray Seal Qualification and Validation (including 21 CFR Part 11) 4
D Design Verification Sample Size vs Repeats Statistical Analysis Tools, Techniques and SPC 9
S Determining sample sizes for PQ Qualification and Validation (including 21 CFR Part 11) 4
M Minimum sample size - Guidance and statistical rationale Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
L Sample Procedure from Contract Manufacturer Prospective ISO 14971 - Medical Device Risk Management 1
D Adding a Class I to a sample box Canada Medical Device Regulations 5
P Unrealistic Packaging Validation Sample Size 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 41
M ISO 9001:2015 case study sample ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
M Sample of Nonconformity report for ISO 9001:2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
B Control chart and sample time Statistical Analysis Tools, Techniques and SPC 1
J Control chart for huge sample size Statistical Analysis Tools, Techniques and SPC 9
D How to list multi-product sample pack in GUDID 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
S Is there a standard for sample size during R&D phase Other ISO and International Standards and European Regulations 18
M Minitab assistant: 1-Sample % Defective Test Using Minitab Software 1
J Sample size definition in an Automotive SMT pilot lot run Misc. Quality Assurance and Business Systems Related Topics 1
T ISO 27001 sample audit report IEC 27001 - Information Security Management Systems (ISMS) 5
B IATF 16949 - Is a Deviation required for sample components in a prototype build? IATF 16949 - Automotive Quality Systems Standard 13
D Sample Calibration SOP for ISO 13485 General Measurement Device and Calibration Topics 4
T Sample of 1st Article Inspection Report wanted APQP and PPAP 3
E Correct way to certify hydrostatic testing when it is not 100% (and Sample Size) Various Other Specifications, Standards, and related Requirements 6
N Design Verification & Process Validation - Statistical sample sizes Design and Development of Products and Processes 2
B Determining sample size for device sterility Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
A In which EU countries would it be okay to use sample labels for registration? EU Medical Device Regulations 0
D Determining of sample size for 'Operational Qualification' AQL - Acceptable Quality Level 5
F Bayes Success run Theorem for sample size during OQ&PQ Qualification and Validation (including 21 CFR Part 11) 4
Watchcat Identification of Test Sample in Test Reports? Design and Development of Products and Processes 22
M AQL table - I need to sample 1250pcs AQL - Acceptable Quality Level 3
K The correct way of doing a 2 Sample T test Reliability Analysis - Predictions, Testing and Standards 7
I Device modifications - Clinical sample size rationale EU Medical Device Regulations 5
M Informational How to perform a clinical evaluation of medical devices – Part 1 – Overview and sample of activities Medical Device and FDA Regulations and Standards News 0
M SOP Sample for BC/ISO22301 (Business Continuity) wanted Business Continuity & Resiliency Planning (BCRP) 4
J Sample size for creating a data base as a reference to a tested variable Other Medical Device and Orthopedic Related Topics 6
R Medical Device Design verification sample prototype Other Medical Device and Orthopedic Related Topics 14
J ISO 17025 - Please share a sample procedure for monitoring the validity of results ISO 17025 related Discussions 1
M Inputs on definition of very similar processes for multi site audit sample - IAF MD1 2018 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
Q Autoclave and Sample Container - Pressure-steam cooking's effect Reliability Analysis - Predictions, Testing and Standards 1

Similar threads

Top Bottom