Sample record for verification performed by importers before placing a device on the market

MDRResearcher

Starting to get Involved
#1
According to Art. 13.2 Importers shall verify that the following requirements are met:
• the device has been CE marked and the EU declaration of conformity of the
device has been drawn up in the languages of the Member States in which
the importer plans to place the device on the market,
• a manufacturer is identified and has designated an authorised representative
in accordance with article 11,
• the device is labelled in accordance with the Regulation and accompanied
by the required instructions for use,
• where applicable, a UDI has been assigned to the device by the manufacturer
in accordance with article 27.

Can someone share sample of record for performing this verification?
 
Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
N Notification Sample Regarding Record Retention ISO 13485:2016 - Medical Device Quality Management Systems 5
B Training Records and Competency - Seeking sample training record Records and Data - Quality, Legal and Other Evidence 7
S Determining Sample Size and Method Quality Tools, Improvement and Analysis 6
C Complaint Return Sample Size Question 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
shimonv Frequency and sample size for lot release of EtO sterilized products EU Medical Device Regulations 2
X Sample SOC2 audit report (or a redacted one) IEC 27001 - Information Security Management Systems (ISMS) 0
A Clinical assessment sample size - Medical device Class IIb implantable (93/42 directive) EU Medical Device Regulations 2
P Sample Size for Distribution Simulation Testing Inspection, Prints (Drawings), Testing, Sampling and Related Topics 11
E Any sample of a full software life cycle IEC 62304 report ( any class )? IEC 62304 - Medical Device Software Life Cycle Processes 4
G Where to buy Template / sample SCSMS Manual, checklist Supply Chain Security Management Systems 1
C Stress / Challenge Conditions for Design Verification Testing to Reduce Sample Size 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 11
K How can Acceptance Number and Reject Number be larger than Sample Size on Z1.4 Table? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
P MSA - what exactly mean "system" and master sample Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
J Validation Sample Size for Tray Seal Qualification and Validation (including 21 CFR Part 11) 4
D Design Verification Sample Size vs Repeats Statistical Analysis Tools, Techniques and SPC 9
S Determining sample sizes for PQ Qualification and Validation (including 21 CFR Part 11) 4
M Minimum sample size - Guidance and statistical rationale Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
L Sample Procedure from Contract Manufacturer Prospective ISO 14971 - Medical Device Risk Management 1
D Adding a Class I to a sample box Canada Medical Device Regulations 5
P Unrealistic Packaging Validation Sample Size 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 41
M ISO 9001:2015 case study sample ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
M Sample of Nonconformity report for ISO 9001:2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
A Sample Agreement available for Outsourcing Medical Device Design activity? ISO 13485:2016 - Medical Device Quality Management Systems 1
B Control chart and sample time Statistical Analysis Tools, Techniques and SPC 1
J Control chart for huge sample size Statistical Analysis Tools, Techniques and SPC 9
D How to list multi-product sample pack in GUDID 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
S Is there a standard for sample size during R&D phase Other ISO and International Standards and European Regulations 18
M Minitab assistant: 1-Sample % Defective Test Using Minitab Software 1
J Sample size definition in an Automotive SMT pilot lot run Misc. Quality Assurance and Business Systems Related Topics 1
T ISO 27001 sample audit report IEC 27001 - Information Security Management Systems (ISMS) 5
B IATF 16949 - Is a Deviation required for sample components in a prototype build? IATF 16949 - Automotive Quality Systems Standard 13
D Sample Calibration SOP for ISO 13485 General Measurement Device and Calibration Topics 4
T Sample of 1st Article Inspection Report wanted APQP and PPAP 3
E Correct way to certify hydrostatic testing when it is not 100% (and Sample Size) Various Other Specifications, Standards, and related Requirements 6
N Design Verification & Process Validation - Statistical sample sizes Design and Development of Products and Processes 2
B Determining sample size for device sterility Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
A In which EU countries would it be okay to use sample labels for registration? EU Medical Device Regulations 0
D Determining of sample size for 'Operational Qualification' AQL - Acceptable Quality Level 5
F Bayes Success run Theorem for sample size during OQ&PQ Qualification and Validation (including 21 CFR Part 11) 4
Watchcat Identification of Test Sample in Test Reports? Design and Development of Products and Processes 22
M AQL table - I need to sample 1250pcs AQL - Acceptable Quality Level 3
K The correct way of doing a 2 Sample T test Reliability Analysis - Predictions, Testing and Standards 7
I Device modifications - Clinical sample size rationale EU Medical Device Regulations 5
M Informational How to perform a clinical evaluation of medical devices – Part 1 – Overview and sample of activities Medical Device and FDA Regulations and Standards News 0
M SOP Sample for BC/ISO22301 (Business Continuity) wanted Business Continuity & Resiliency Planning (BCRP) 4
J Sample size for creating a data base as a reference to a tested variable Other Medical Device and Orthopedic Related Topics 6
R Medical Device Design verification sample prototype Other Medical Device and Orthopedic Related Topics 14
J ISO 17025 - Please share a sample procedure for monitoring the validity of results ISO 17025 related Discussions 1
M Inputs on definition of very similar processes for multi site audit sample - IAF MD1 2018 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
Q Autoclave and Sample Container - Pressure-steam cooking's effect Reliability Analysis - Predictions, Testing and Standards 1

Similar threads

Top Bottom