SBS - The best value in QMS software

Sampling - ISO 16269-6 vs ISO 2859

Chef100

Starting to get Involved
#1
Hi all
In my firm we are currently discussing how to make sampling plans for release of prototype lots from production. Some of these prototype productions are used for Design Verification (DV) activities. If we need sampling in DV we base our sampling plan on ISO16269-6. Usually we use ISO 2859 for sampling in production but I have been challenges if we cant used the same sampling plan based on ISO 16269-6 because some of the testing results from production can be used as part of DV activities. There is therefore an interest in making sure that the sample size is similar.

But can 16269-6 with probability and reliability setting be used for approving a production lot and can it be justified?

Looking forward to hear your insights.
 
Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
N Sampling Plan for Internal Audits - ISO 2859 or 3951 - Or Neither? Internal Auditing 6
A ISO 2859-1 - 9.3.3.2 Switching score - Sampling Plans and PPM AQL - Acceptable Quality Level 0
S High voltage testing - ISO 17025 - 7.2.2 Validation of methods and 7.3 Sampling ISO 17025 related Discussions 3
A ISO 2859 Single Sampling - Clarification regarding the sampling table Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
T ISO 13485: 2016 Internal Audit - Is sampling on projects allowed? ISO 13485:2016 - Medical Device Quality Management Systems 6
L ISO 2859-2 LQL sampling plan linked to %confidence/%reliability Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
M ISO / ASTM standards for Sampling Plans for Medical Devices Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
N Use of arrows in ISO 2859-1 Table 1 and 2-A sampling plan Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
N Sampling for Internal Test based upon ISO 2859-1, G-I Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
B ISO 3951 - Sampling procedure for Inspection by Variables Data AQL - Acceptable Quality Level 11
S Military Sampling Plan 105E vs. ISO 2859-1 AQL - Acceptable Quality Level 2
E Is Volumetric Air Sampling required for Class ISO 7 Cleanroom ? ISO 13485:2016 - Medical Device Quality Management Systems 1
I Alpha and Beta in the Sampling Plan for ISO 2859 & ISO 3951 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 13
D Disposable Medical Device Sampling Plans per ISO 2859-1 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
F AQL - ISO 3951-4:2011 Sampling Plan Requirements AQL - Acceptable Quality Level 2
G ISO 17025 - Don't think we need a Sampling Plan... Or do we? ISO 17025 related Discussions 3
Q Sampling Plan Acceptance Criteria - ISO TS 16949 Clause 7.1.2 IATF 16949 - Automotive Quality Systems Standard 8
E Which sampling table (ISO-2859) must I use on different lot sizes Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
0 AQL Sampling Plan based upon ISO 2859 AQL - Acceptable Quality Level 1
D ISO 2859 to set up a Sampling Program in a Food Manufacturing Company Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
J Acceptance Sampling for Bulk Materials - Anyone knowledgeable about ISO 10725? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
G Sampling plans for large quantities along lines of ISO 2859-1:1999 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
R Sampling Plans - ISO 2859-1: 1999 - How to calculate the switching score? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
I Asian Supplier Sampling Plans besides MIL-STD-105? My thought was ISO 2859? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
H Incoming Inspection Sampling Plan ISO 2859-1/ ISO 2859-2 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
Q ISO/TS 16949 Questions About clause 7.1.2. Attribute Data Sampling Inspection, Prints (Drawings), Testing, Sampling and Related Topics 11
C Sampling Plan Software Packages - Implementing ANSI Z1.4 & Z1.9 (or ISO equivalent) Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
S Developing sampling plans based on AS1199, ISO 2859-1 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
T ISO 2859-3 - Skip-lot sampling procedures - Unauthorized Inspection Frequency Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
A Sampling - What does it mean by Sampling in ISO:IEC 17025 ISO 17025 related Discussions 1
E ISO/IEC 17025 Sampling Plans - Sampling clauses not applicable for test labs? ISO 17025 related Discussions 4
Stuart Andrews Sampling Plans (ISO 2859-1)(BS6001-1) - Probability of defects within a lot Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
J IVD sampling sizes for buyer Reliability Analysis - Predictions, Testing and Standards 0
S Which Sampling Plan(s) Should I Use? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
L Sampling Plan Risks AQL - Acceptable Quality Level 6
A Sampling plan for in-process QC (medical devices) Inspection, Prints (Drawings), Testing, Sampling and Related Topics 13
M Minitab Capability of the Population (no sampling) Using Minitab Software 11
W LTPD, AQL, Ppk and Cpk validation sampling plan table Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
Q Sampling method for Distributor verification activities EU Medical Device Regulations 1
E Change in control plan - Do I have to do sampling? IATF 16949 - Automotive Quality Systems Standard 1
S Is using ANSI/ASQ Z1.4-2008 the correct sampling plan to determine Pass/Fail of Apparel measurements? AQL - Acceptable Quality Level 4
F Product audit sampling plans IATF 16949 - Automotive Quality Systems Standard 3
R Reduced sampling plan for sterial products APQP and PPAP 0
R BS EN 12060:1998 - Zinc and zinc alloys Method of sampling Specifications Manufacturing and Related Processes 4
8 Activity Sampling Exercise Lean in Manufacturing and Service Industries 11
T Defining sampling plan for different AQL AQL - Acceptable Quality Level 3
B AS9100D Sampling Plan AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
R Design verification for interim design outputs - sampling rationale ISO 13485:2016 - Medical Device Quality Management Systems 2
Nicole Desouza Sampling plan for a customer who wants AQL 1.0 (per ANSI Z1.4) AQL - Acceptable Quality Level 5
V How to interpret AQL sampling tables AQL - Acceptable Quality Level 5

Similar threads

Top Bottom