Saturday Inspection at Tosebo

H

hausser

#1
I remember Saturday Mornings as a flurry of activity - reading the cabin or tent for the Coach's inspection! I believe there was an "order" for the personal items on the shelf, and all comic books, etc., needed to be hidden. Beds were the critical item, with "hospital corners" and tight enough to "bounce a quarter." (Valuable lesson for my two year Army Career!)

Getting all the sand off the floor was almost impossible!

I believe that each tent was assigned a week for keeping the "Kybo" (Laterine or bathroom) orderly.

- Bob "Runnig Deer" Hausser '56 - '58
 
Elsmar Forum Sponsor

Marc

Hunkered Down for the Duration
Staff member
Admin
#2
Were the inspections linked to going into town or anything? I remember the inspections but not very well.
 
S

Strong Bow

#3
Certainly it was claimed that Saturday inspection was your ticket to Onekema, and I do remember that it was desirable to go in with the first group (better selections no doubt). I don't think anyone every failed inspection so badly that they were denied the trip to town, although who's going to announce to the camp that they're so sloppy they can't buy ice cream and candy? ANybody remember anyone getting punished beyond a lost honor and missing a trip to Onekema?

Dave Wallace
 
N

Neil Suits

#4
Saturday was a pleasant day at Tosebo. We went to town and got about a dollar allowance to spend as we wished. I understand from others that the name of the town was Onekema. The only places I recall are the A&W rootbeer stand and the Drugstore. I spent all of my money in the drugstore on candy and comics. Usually I’d get about a half dozen pixie sticks, a package of sweetarts, a Reese’s peanut butter cup and 2-3 comics. If I’m not mistaken, the Hulk was introduced during one my summers at Tosebo. (I just checked Google and the Hulk was actually introduced for 6 issues in 1962 as a Grey Hulk. In 1964 he got his own story). I got the comic and liked him right away. The afternoons back at camp were spent resting, eating candy, reading comics and writing postcards. The closest thing to it nowadays is quality time on Sunday with the New York Times and a bagel.


Neil Suits 1964-5
 
Thread starter Similar threads Forum Replies Date
B Deer hunting starts this Saturday in Texas (November 2016) Coffee Break and Water Cooler Discussions 5
Hershal What is up with Saturday night TV right now? Coffee Break and Water Cooler Discussions 16
Howard Lee Anyone Else Taking the CQE Exam on Saturday 2 December 2006? Professional Certifications and Degrees 13
M Did anyone take the CSQE exam on saturday (6/3/2006) Professional Certifications and Degrees 6
Y What are different Special Inspection Level 1-4 and General spesification 1-3 ? AQL - Acceptable Quality Level 0
J Mechanical inspection techniques of close tolerance parts Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
T Help to Suggest name for a new certification and inspection company Coffee Break and Water Cooler Discussions 7
B GM GP-12 Exit Criteria - Additional Safe Launch Inspection - (Also see GM1927-28 ) Customer and Company Specific Requirements 2
S Process Inspection -Sub assembly process inspection sheet Lean in Manufacturing and Service Industries 3
C OEE and In-process Inspection Manufacturing and Related Processes 2
R AS9100 - 8.4.2 - Receiving Inspection Requirements AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
I Mother bobbin final inspection criteria Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
Marc Visual Inspection - Color Vision Coffee Break and Water Cooler Discussions 15
G Inspection Logs - Asked to remove an Inspection Sheet ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
Skooma Receiving Inspection - Boss trying to save money AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
T Sample of 1st Article Inspection Report wanted APQP and PPAP 3
T Nonconforming product at customer detected by a routine inspection by field service Nonconformance and Corrective Action 9
A Definition of customer in ITP (Inspection & Test Plan) Contract Review Process 3
T Correct MSA study for an automated camera system which makes attribute inspection Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
A DCMA inspection for a drop-shipment AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
S QUALITY OBJECTIVEs for third party garments factory inspection ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
D Lean and Elimination of QC Inspection Points in a New factory Lean in Manufacturing and Service Industries 9
F FDA-registration and inspection cost 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
I Receiving Inspection Requirement in IATF IATF 16949 - Automotive Quality Systems Standard 3
R Supplier related drawings and verification of process requirements - Source Inspection AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
D AS9100 Inspection records - Is there a requirement to have gauge ID and calibration status AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
D Good Acceptance Activity/Inspection flowchart for reference - Wanted Please Process Maps, Process Mapping and Turtle Diagrams 2
K Inspection Certificate EN 10204 2.1 - Distribution company Other ISO and International Standards and European Regulations 4
S Improving Quality inspection gate in one piece flow manufacturing process Manufacturing and Related Processes 0
M Loss of a Quality Record - FDA Inspection Records and Data - Quality, Legal and Other Evidence 4
S Need Assistance in Visual Inspection - Tiny electronic components AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 11
S. Moore Is an Annual Layout Inspection the same as an Annual Re-validation? Internal Auditing 1
D Incoming (Receiving) Inspection - General form for incoming part inspection Document Control Systems, Procedures, Forms and Templates 17
K First Article Inspection (FAI) - Equipment used - Dimensions vs. Go/No-Go ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
M Informational USFDA Draft Guidance – Review and Update of Device Establishment Inspection Processes and Standards Medical Device and FDA Regulations and Standards News 0
S Inspection/sampling economics Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
C Is a First Article Inspection (FAI) Procedure required by ISO 13485? ISO 13485:2016 - Medical Device Quality Management Systems 3
T EN 10204 3.1 Inspection Certificate - Machine Shop Various Other Specifications, Standards, and related Requirements 4
A Doubt on multiple inspection carrying out for same balloon number during Stage Inspection and Final Inspection? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
M 3rd Party Sorting and Inspection Company Certification Service Industry Specific Topics 4
D FDA QSR task checklist based on inspection citations 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 5
John Predmore What size pinhole can be reliably detected using visual inspection? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
F Holes position inspection - Calculation of centre distance and plug sizes of a gauge Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
V Inspection with 3D Scanning - Reference Data Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
L Inspection Plan for Microscope Objective Lens Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
N Process Flow diagram steps for inspection and packaging APQP and PPAP 4
S Poka Yoke Inspection Retaining Ring (C-Clip) Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
J Recommendations on Inspection/SPC Software Statistical Analysis Tools, Techniques and SPC 4
M FAI AS9102 - What does a First Article Inspection cover? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 11
C AS9100, Clause 8.5.1.3 - First Article Inspection Costs AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 16

Similar threads

Top Bottom