Scales - Gage R&R, Bias, Linearity, Stability

B

Benoit

#1
Hi,

I want to perform the R&R, bias, linearity, stability on scales in our laboratory. We use the scales to weight pigments and resins.

How to do realize these tests?

:confused:

Thanks
 
Elsmar Forum Sponsor

howste

Thaumaturge
Super Moderator
#2
Do you have a copy of the automotive MSA manual (Measurement Systems Analysis)? This book has all of the information you would need to do all of these studies.
 
Thread starter Similar threads Forum Replies Date
F GRR (Gage R&R) with Different Scales Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 10
B Gage R&R Study on Laboratory Scales Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
L Tape Measures & Scales - Part Tolerance - Gage R&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 24
C Industrial scales and MSA (IATF 16949 requirement 7.1.5.1.1) IATF 16949 - Automotive Quality Systems Standard 30
E Scales integrated in medical device IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
Q Translating FDA Searches - Neonatal incubator weigh scales US Food and Drug Administration (FDA) 5
Manix Calibration of Scales to Traceable Standards (Clause 7.6) - Required or Not Calibration Frequency (Interval) 6
W Legality of selling parts by count - Counting Scales Quality Manager and Management Related Issues 6
A Calibration of Disposable Weight Scales General Measurement Device and Calibration Topics 2
P Applying Combined Tolerances of Two Scales - Balance Tolerance Question General Measurement Device and Calibration Topics 9
L Is calibration required for weighing scales used for shipping purposes ? Misc. Quality Assurance and Business Systems Related Topics 10
D Single-Point Scale Calibration - Very Large Scales General Measurement Device and Calibration Topics 3
N What brand of scales do you use in pharma? Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 6
WEAVER Calibration of Measuring Instrument by Adjustment of its Scales IATF 16949 - Automotive Quality Systems Standard 2
F How to calculate the minimum Value of Mass needed for Scales Calibration? General Measurement Device and Calibration Topics 6
M To Calibrate or Not to Calibrate various Weight Scales ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 24
M FMEA Rating Scales for the Insurance Industry FMEA and Control Plans 4
D Scales calibrated by an ISO 17025 accredited organization? TS 16949 requirement? ISO 17025 related Discussions 44
H Less Really is More When it Comes to Response Scales The Reading Room 9
V Daily weight checks of floor scales General Measurement Device and Calibration Topics 9
S Satisfaction scales - positive to negative or negative to positive Benchmarking 6
R Calibration of Scales for Weigh Counting General Measurement Device and Calibration Topics 19
Q Weighing (Weight) Scales Verification - Blank weight of material General Measurement Device and Calibration Topics 13
T How to calibrate dial indicators, gauges and scales General Measurement Device and Calibration Topics 22
F Scales and Accuracy - Getting scale companies to give out accuracy for their scales Reliability Analysis - Predictions, Testing and Standards 2
M Weighing scales to be used at each machine on the shop floor Manufacturing and Related Processes 6
J Surface Finish Tester Recommendations with both Ra and Rz (english and metric) scales Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
A Required platform for scales (a weighty matter?) General Measurement Device and Calibration Topics 8
C SPC for calibration check data? Daily gram scales check - What is acceptable? Statistical Analysis Tools, Techniques and SPC 5
J UPS owned shipping carton weight scales - Include this in my Calibration system? General Measurement Device and Calibration Topics 9
J Should weigh count scales be in the Calibration System? QS-9000 - American Automotive Manufacturers Standard 4
B Gage calibration frequency, ISO and IATF - What are the requirements Calibration Frequency (Interval) 3
R Determining Uncertainty from Gage R&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
C Correct Calibration Method for Dial Depth Gage General Measurement Device and Calibration Topics 6
C Gage Block Wringing General Measurement Device and Calibration Topics 3
B Gage R&R with NDC=1 Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 19
S Type 1 Gage R&R or something else? Reliability Analysis - Predictions, Testing and Standards 6
G Should I perform Gage R&R only at the beginning of a new project? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
V Thread Plug Gage Pitch GO Diameter out of spec AQL - Acceptable Quality Level 8
G Gage R&R - Where am I going wrong? Part of a FAIR submission (Aerospace) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
R Gage R&R Excel templates Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
K Gage R&R with more than 3 appraisers Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
Anerol C Gage R&R Template AIAG 4th Edition IATF 16949 - Automotive Quality Systems Standard 3
T Attributes SPC study - Attributive control (Go gage) Statistical Analysis Tools, Techniques and SPC 5
S Capability or Gage R&R Study for Leak Tester? Reliability Analysis - Predictions, Testing and Standards 15
N % Tolerance - Type 1 study on the gages, then a gage R&R (ANOVA) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
M Definitive answer on Type 1 vs Type 2 vs Type 3 Gage Study Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 0
V Gage Management and Gage R&R Software General Measurement Device and Calibration Topics 1
D Gage R&R Study on Load Cells - Large chemical blending tanks IATF 16949 - Automotive Quality Systems Standard 1
B Minitab Type 1 Gage Study on True Position Question Measurement Uncertainty (MU) 1

Similar threads

Top Bottom