Service Parts Assembly Line and Scope of TS16949 Registration

#1
We have an 1 assembly line left at one location and have no plans to move it, however, effective immediately it only supplies service parts and will only be ran maybe 2-3 times per year.

The question is, will it need to be part of the scope of our TS External audit or would it now be excluded since most likely it wouldn't be running during the audit...?

Thoughts...?:bigwave: All help is appreciated...!
 
Elsmar Forum Sponsor
T

Taliesyn

#3
We have exactly the same thing. The supply is still "live" even though it is only producing a fraction of the serial production volume. It does still need to one the scope and, if it is a remote location, you will need to check that it is noted correctly on the ISO/TS certification. Does the rest of the plant produce for OEMs or is this the only automotive product in that plant?
 
Thread starter Similar threads Forum Replies Date
K Packaging and Damaged Parts returned from a Service Provider (Anodize) - Who is Responsible? Manufacturing and Related Processes 20
A AS9100 D Counterfeit Prevention Program - We just service parts AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 17
D Repacking of Service Parts and Components for Medical Devices 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 1
S Service Parts PPAP AIAG Manual - Opinions APQP and PPAP 4
M Definition Receiving Inspection of Parts, finished products, service parts etc. Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 6
B Nonconforming Parts found by our Service Department Nonconformance and Corrective Action 3
D How long must we provide service parts to Ford? IATF 16949 - Automotive Quality Systems Standard 7
V Are there different expectations for PPAP for Service Parts? APQP and PPAP 1
T Supplier Scorecards - Service/Parts (Diesel trucks and engines) Supplier Quality Assurance and other Supplier Issues 1
S Does Package Validation required for Service Parts Packaging Carton Box? ISO 13485:2016 - Medical Device Quality Management Systems 1
E APQP Process for Service Parts - Many part numbers APQP and PPAP 4
E PSW (Part Submission Warrant) for Service Parts APQP and PPAP 4
A How long must I provide service or spare parts for medical devices Other Medical Device and Orthopedic Related Topics 10
P What is the difference between service parts and production parts? IATF 16949 - Automotive Quality Systems Standard 6
MarilynJ6354 Service & Installation Parts Identification - Install equipment at a customer's site Service Industry Specific Topics 6
Douglas E. Purdy Does TS16949 Scope cover Service Parts? IATF 16949 - Automotive Quality Systems Standard 7
M Service Program - Treat Service Parts Similiar to Production Parts? IATF 16949 - Automotive Quality Systems Standard 3
N Service Parts and PPAP - Outsourcing service parts to a third-party manufacturer APQP and PPAP 2
J Are all automotive parts considered service parts? Paintshop service provider IATF 16949 - Automotive Quality Systems Standard 4
D Design of Services - Can a Heat Treating service exclude parts of 7.3? Design and Development of Products and Processes 7
C Archive Requirements - Past engineering change levels and service parts for PPAP APQP and PPAP 2
J Servicing element - Servicing of the automobile or the production of service parts QS-9000 - American Automotive Manufacturers Standard 3
V PPAP for Service parts? APQP and PPAP 1
Marc Documentation and Service Parts Document Control Systems, Procedures, Forms and Templates 0
E Qualification for non gmp service providers Supplier Quality Assurance and other Supplier Issues 0
I Equipment service dates ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 9
H Operational planning and product and service provision when things happen so fast ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
C One Time Service Supplier - Temperature and Humidity Testing Service ISO 13485:2016 - Medical Device Quality Management Systems 5
D IEC 60601-1 - Service life testing IEC 60601 - Medical Electrical Equipment Safety Standards Series 8
D Device functionality over service life - Objective evidence required? Design and Development of Products and Processes 10
Q ISO 9001 8.5.1 - Control of production and service performance ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
L Design & Development of a SERVICE Service Industry Specific Topics 13
N Evaluation of service providers Supplier Quality Assurance and other Supplier Issues 2
N "Placing on the market" & "putting into service"- one time regulatory event or Continual supply event? EU Medical Device Regulations 2
samarth IVD manufacturer and service provider ISO 14971 - Medical Device Risk Management 2
C Quality Manager vs Warranty (service) Manager - Authorities & Responsibilities Customer Complaints 2
J Product Service after CE Certification expiration CE Marking (Conformité Européene) / CB Scheme 1
T Nonconforming product at customer detected by a routine inspection by field service Nonconformance and Corrective Action 9
S Service record requirements for Non-Serviceable Medical Devices CE Marking (Conformité Européene) / CB Scheme 1
C Quality at Logistical Service Provider Service Industry Specific Topics 0
M Standards Subscription Service and Standards Tracking Service Pros and Cons? Other US Medical Device Regulations 3
J NHS exemption - Benefits versus expectations in UK NHS service EU Medical Device Regulations 0
C ISO 9001:2015 Monitoring and measuring resources. Application a service industry ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
F 21 CFR Part 11 - Implicit requirements - Validation plan for a Software as a Service Other US Medical Device Regulations 1
M Informational From RAPS – Prep for Brexit: UK Seeks £25M Freight Service to Deliver Medicines, Devices Medical Device and FDA Regulations and Standards News 0
C Determining if Maintenance Contractor is an External Service subject to ISO 9001 Clause 8.4 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 43
W Customer Signature / Acceptance Service Reports Service Industry Specific Topics 2
T Is anyone working with N299.1 (Supply/service to nuclear power plants)? Various Other Specifications, Standards, and related Requirements 0
Ed Panek Ideas to keep quotes for consulting service accurate on not inflated Consultants and Consulting 11
M Informational New Notified Body designated under the MDR – TÜV SÜD Product Service GmbH Zertifizierstellen Medical Device and FDA Regulations and Standards News 1

Similar threads

Top Bottom