Simple process for providing Serial/Lot Numbering for our product

O

oldlady

#1
I am trying to develop a simple process for providing serial/lot numbering for our product. Does anyone have an SOPs they'd be willing to share???

:thanx:
 
Elsmar Forum Sponsor
N

noboxwine

#2
Re: Serial/Lot Numbering

I am trying to develop a simple process for providing serial/lot numbering for our product. Does anyone have an SOPs they'd be willing to share???

:thanx:

If the Lot information to be on the physical parts, you can mark them by Work Order Number, Julian Date plus a Work Cell ID, etc. Can you provide more information to make sure we can help ? Type of Product, Processes, etc. Thanks----D. :D
 
O

oldlady

#3
Re: Serial/Lot Numbering

We're really just in the beginning phases of the process. Our "manufacturing cell" is actually in a lab area where a few people put together various sub assemblies to finally create the final device. I think we should be assiging lot numbers at incoming (also a new process in development) for critical components, put those into the sub assemblies and probably assign lot numbers to those sub assemblies. Does that sound probable or am I making more work than necessary?

Thanks again
 
N

noboxwine

#4
Re: Serial/Lot Numbering

We're really just in the beginning phases of the process. Our "manufacturing cell" is actually in a lab area where a few people put together various sub assemblies to finally create the final device. I think we should be assiging lot numbers at incoming (also a new process in development) for critical components, put those into the sub assemblies and probably assign lot numbers to those sub assemblies. Does that sound probable or am I making more work than necessary?

Thanks again
I guess it depends on the risk involved if you have a failure and need to recall parts. I make safety-critical auto parts, so our traceability on the physical part gets us back to the hour and bundle in which the part was run. So, how important is it for you to know the detail of the assembly and sub-assy ? Also, what does your Customers expect ?
 
O

oldlady

#5
We're in the process of determining these risks. I think I'll just go very basic (year, followed by numeric sequence) and revise as we mature.

Thanks for your help
 
Thread starter Similar threads Forum Replies Date
C Micrometer and Vernier Caliper simple calibration process General Measurement Device and Calibration Topics 8
J Simple supplier evaluation qualification process form that includes Risk Assessment Document Control Systems, Procedures, Forms and Templates 2
V Making a choice of Simple vs Comprehensiveness of Procedure/System of any Process Document Control Systems, Procedures, Forms and Templates 4
X FDA Approval Process - Simple Explanation requested US Food and Drug Administration (FDA) 4
B Overall Process Capability - Simple question if you know how to answer it! Statistical Analysis Tools, Techniques and SPC 3
A Pairwise comparison and AHP (Analytic Heirarchy Process) - Need simple examples Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
Z Simple assembly service - How could we do process study? Attribute data Statistical Analysis Tools, Techniques and SPC 1
C Simple four-box process model - Referenced in ASQ Process-based auditing course General Auditing Discussions 5
W TREND Identification - Good (and simple) procedure or process to identify and track Other ISO and International Standards and European Regulations 4
Marc Business Process Mapping - A simple powerpoint .ppt presentation Process Maps, Process Mapping and Turtle Diagrams 0
T Simple Layered Process Audit format - What are you using? Required resources & time? Process Audits and Layered Process Audits 20
D Simple process flow chart for a manufacturing operation ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
J Process vs. Function - Could someone explain the differences in simple terms ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
P Simple PPAP / APQP Step-by-Step Process APQP and PPAP 3
M Nice and simple invitation email to an audit kickoff meeting Internal Auditing 1
G Rework, Reprocess, or Correction - A simple blurred letter on the legible etching ISO 13485:2016 - Medical Device Quality Management Systems 4
C Looking for simple Software Validation IQ templates. Qualification and Validation (including 21 CFR Part 11) 4
I Tracking Protoype Changes; 8D or simple document revision? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
Q Simple and effective way to maintain Training Matrix ISO 13485:2016 - Medical Device Quality Management Systems 16
L Simple Example for PFMEA / Control Plan Training Training - Internal, External, Online and Distance Learning 1
K Simple ISO 9001:2015 Overview Presentation wanted ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 20
V Acceptance Criteria Gage R&R - Simple vs Complex Techniques Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 8
K Simple ISO 9001 Compliant Document Control Quality Manager and Management Related Issues 24
R Determining the feasibility/scope for FDA IQ/OQ against a very simple application US Food and Drug Administration (FDA) 2
R Root Cause for "Simple" External Audit Findings ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
Marc What Airlines Really Charge (In 1 Simple Table) Travel - Hotels, Motels, Planes and Trains 6
E Simple Calibration Procedures for Surftest SJ-400 General Measurement Device and Calibration Topics 6
K Too Simple an Internal Audit Check Sheet? Internal Auditing 10
S Can you help with a simple SPC sheet to judge if inspection is Good / No Good ? Capability, Accuracy and Stability - Processes, Machines, etc. 8
T Microsoft Access Database to create a Simple Calibration Certificate General Measurement Device and Calibration Topics 6
S Destructive Attribute MSA for Simple Water Leak Check in Trailers Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
V Best CAPA for slip in simple-yet-persistent oversight-review mechanism Nonconformance and Corrective Action 7
A Simple 125 piece part Capabilty Excel .xls sheet to calculate Cpk Capability, Accuracy and Stability - Processes, Machines, etc. 3
R A simple electronic (software) document control question ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
A QSM documents for Simple Designs Quality Manager and Management Related Issues 12
M Looking for a simple procedure on section 7.5.2 for Validation of Processes ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 9
Proud Liberal Making a simple Sampling Plan by Variables Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
W Simple SPC Software recommendations Quality Assurance and Compliance Software Tools and Solutions 8
Z IEC 60601-1-2 for very simple Medical Device Accessory IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
P Monitoring Production Defects - Three simple questions Six Sigma 3
C Simple explanation of Uncertainty in Calibration Measurement Uncertainty (MU) 2
V External power supply with reinforced insulation as a simple secondary circuit? IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
M Conducting Limited Internal Audits of QMS Elements - Simple question I hope ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
K How to set up a simple Complaint and CAPA workflow Nonconformance and Corrective Action 9
V Simple Representation for Scope of DFMEA and PFMEA FMEA and Control Plans 4
Stijloor Simple Navigation Guide for the MSA 4th Edition Manual Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 0
S Simple Cartoons needed Coffee Break and Water Cooler Discussions 4
K Definition Box Plot - Simple Explaination of what a Box Plot is Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 3
M Simple Field Pipeline Demagnetization Procedure needed Document Control Systems, Procedures, Forms and Templates 5
6 Simple Flow Diagram with CCPs for Processing of Raw Fish Food Safety - ISO 22000, HACCP (21 CFR 120) 1

Similar threads

Top Bottom