SBS - The best value in QMS software

Single Minute Exchange of Dies (SMED) Information

R

ralphsulser

#11
#11
Re: Single Minute Die Exchange Information

yassser33 said:
Dear CarolX and harry :

Agian I'm sorry if i break a role for the forum , i didnt meant to spam , because my site is not commerical at all , i dont sell prodcuts or service , its pure content site about business excellence , and i was thinking to save time for "sanjugalande " by direct him to the page instead of search through all the site.

But now , after i read what you wrote , I will not put any sites again , weather its mine or not.

thank you for your direction .
Click to expand...
Yassser33-Thank you for your participation and willingness to help provide information. I hope you stay involved and continue to contribute to the Cove.
You don't need to be sorry, they are just trying to educate you about what we tell all new people. There have been previous people who tried to sell stuff here from their web site, and cloaked their participation because they were trying to make a buck off the Cove participants. So, sometimes the moderators are a little gun shy about these types of conditions.
We need people who are willing to share information and experiences, but not for profit. Please fell free to stay and help us help others and ourselves.
 
Standard Work Instruction Software by Dozuki
Elsmar Forum Sponsor
N

ngkjrs

#14
#14
Re: Single Minute Die Exchange Information

i am enclosing a small write up on SMED. hope this may be helpful to you.

there is a book named sMED for operators by Productivity Inc, that may be useful to you if interested.
 

Attachments

Stijloor

Stijloor

Staff member
Super Moderator
#16
#16
Re: Single Minute Die Exchange Information

Umang Vidyarthi said:
Hello Stijloor,

You have removed the link,but it is also lying in your quote box.Damage control is required.

/Umang ;)
Click to expand...
Umang,

No, I did not remove the link....I just asked if this was this poster's website.
That's why you see the link in the quote box.

Hope this clarifies.

Stijloor.
 
U

Umang Vidyarthi

#17
#17
Re: Single Minute Die Exchange Information

Stijloor said:
Umang,

No, I did not remove the link....I just asked if this was this poster's website.
That's why you see the link in the quote box.

Hope this clarifies.

Stijloor.
Click to expand...
Sorry.Let me reframe the sentence-The link is removed (may be by the moderator),but the link lying in the quote box is defeating the very purpose. Some one empowered is invited to take necessary action.

/Umang
 
Last edited by a moderator:
CarolX

CarolX

Super Moderator
Super Moderator
#18
#18
Re: Single Minute Die Exchange Information

Umang Vidyarthi said:
Hello Stijloor,

You have removed the link,but it is also lying in your quote box.Damage control is required.

/Umang ;)
Click to expand...
Please use the "Report Post" button for your concerns.



:topic:Derailed thread::topic:

It appears that postings for this thread have strayed a bit from it's original purpose. For the maximum benefit of the Original Poster, please guide all posts back to the original poster's question/thought.

Should you feel another issue has arisen that merits further discussion, feel free to start a new thread, or contact a moderator to help with moving some posts.

Thank you!
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
P SMED - Single Minute Exchange of Dies template (tabular column) wanted Lean in Manufacturing and Service Industries 8
P SMED (Single Minute Exchange of Dies) - Project guidelines/ example required Lean in Manufacturing and Service Industries 2
J Pronunciation of SMED (Single Minute Exchange of Dies) Lean in Manufacturing and Service Industries 10
A Can single minute exchange of dies concept be used in office? Lean in Manufacturing and Service Industries 8
A Can SMED (Single Minute Exchange of Dies) be applied to office environment? Lean in Manufacturing and Service Industries 18
D Toyota SMED (Single Minute Exchange of Dies) Clarification Lean in Manufacturing and Service Industries 12
P Single Minute Exchange of Dies and Rollfeeds - SMED in press shops Manufacturing and Related Processes 1
D Single Minute Exchange of Die - Preparing to launch a SMED project Manufacturing and Related Processes 14
S DHF/DMR/MDF for a software-only, cloud-based, single-instance device Medical Information Technology, Medical Software and Health Informatics 2
N Is this a single integral drug device combination product EU MDR CE Marking (Conformité Européene) / CB Scheme 1
R CND nomenclature for single use instruments CE Marking (Conformité Européene) / CB Scheme 1
P Violation of CE mark - Re-use of single-use Products CE Marking (Conformité Européene) / CB Scheme 2
M What are the basics of Medical Device Single Audit Program (MDSAP)? ISO 13485:2016 - Medical Device Quality Management Systems 7
D SINGLE FAULT CONDITION, short circuit and open circuit of any component (IEC 60601-1 3.1) IEC 60601 - Medical Electrical Equipment Safety Standards Series 9
shimonv Single lot release for sterile packaging 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
N Where to find Regulations for Reprocessing and Reuse of Single-Use Devices Other Medical Device Related Standards 2
T Single Fault Condition IEC 60601 Clause 8.7.1 shorting Cr/Cl in Patient Applied Part IEC 60601 - Medical Electrical Equipment Safety Standards Series 7
D Partial FAI - AS9102 - One single drawing has 10 part numbers AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
Sidney Vianna Informational IAF and ILAC Seek Contractor for Establishment of a Single International Organization for Accreditation ASQ, ANAB, UKAS, IAF, IRCA, Exemplar Global and Related Organizations 2
F UDI - Unit of Use and Class I, single-use devices EU Medical Device Regulations 4
A Single use non-sterile syringe used in the oral cavity - Laboratory test advice US Food and Drug Administration (FDA) 7
D How to get EUDAMED Single Registration Number (SRN) EU Medical Device Regulations 17
CycleMike GD&T - Hole pattern - Print (attached) has a single Datum Reference Frame Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
K Does company who manufacture but does not design or carry out clinical trials is responsible for CE marking for single use medical devices? ISO 13485:2016 - Medical Device Quality Management Systems 3
F 2017/745 Article 31 Single Registration Number Medical Device and FDA Regulations and Standards News 5
M Informational EU draft act – Single-use medical devices – safety and performance requirements for reprocessing Medical Device and FDA Regulations and Standards News 0
Q IATF rule for single site - Ingots from scrap metal recycling company IATF 16949 - Automotive Quality Systems Standard 0
R Supplier Controls we can place on Single-Source Suppliers ISO 13485:2016 - Medical Device Quality Management Systems 2
R Critical suppliers (Definition of) and MDSAP (Medical Device Single Audit Program) ISO 13485:2016 - Medical Device Quality Management Systems 15
A Touch current in single fault conditions test and earth leakage current in normal conditions test, are they really different tests? IEC 60601 - Medical Electrical Equipment Safety Standards Series 8
Ed Panek Can a single supplier fit two or more categories for risk? ISO 13485:2016 - Medical Device Quality Management Systems 2
T No Defined Shelf Life/Expiration Date - Disposable single-use, non-invasive, non-sterile Other Medical Device Regulations World-Wide 2
F Reprocessing or refurbishing? Single Use Medical Device CE Marking (Conformité Européene) / CB Scheme 0
S How to make Single Sign On (SSO) Comply e-sig requirements? ISO 13485:2016 - Medical Device Quality Management Systems 4
E Sample size for design verification of variable in single use device Design and Development of Products and Processes 20
Ed Panek Sensitive Supplier Issue - Single source supplier ISO 13485:2016 - Medical Device Quality Management Systems 6
G Single DFU for multiple medical devices in one box Other Medical Device Regulations World-Wide 0
M Medical Device News Health Canada - Medical Device Single Audit Program (MDSAP) Transition Plan Canada Medical Device Regulations 2
A ISO 2859 Single Sampling - Clarification regarding the sampling table Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
bio_subbu Indian government issues guidance on Grouping Medical Devices in a Single Submission Other Medical Device Regulations World-Wide 1
F Marketing a single medical device with multiple indications Other US Medical Device Regulations 4
G IEC 61010 - Single Fault Condition - Protective Impedance Implementation IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
T Definition Sole source VS. Single Source - Definitions Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 2
Edward Reesor MDSAP (Medical Device Single Audit Program) Costs Canada Medical Device Regulations 7
Mikey324 GR&R - Little to no part to part variation in single part number Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 14
R How many Corrective Action Request can be Issued by DCMA for a single issue? Nonconformance and Corrective Action 2
I Label Expiration Date - Single Use Combination Medical Device EU Medical Device Regulations 2
M What are Single Fault Conditions and how to test - IEC 80601-2-13 Other Medical Device Related Standards 0
M Merge Technical File, DMR, and Device File into a single document? Other Medical Device and Orthopedic Related Topics 3
P Single Use Disposable Dental Syringe - CE Marking Advice EU Medical Device Regulations 4

Similar threads

Top Bottom