Size of Medical Device Distributor Logo

J

JimBa

#1
Hi, I distantly remember a regulation pertaining to the size of the distributor logo versis the size of the manufacturer logo on the label when distributing medical devices. The distributor logo must be the same size or smaller than the manufacturer? Am I correct in this? or am I remembering this incorrectly
 
Elsmar Forum Sponsor

pkost

Trusted Information Resource
#2
Re: Size of distributor logo

I have also heard of this in the past, however can find no evidence of the ruling...It may be country specific, but again I have not found any evidence of this.

We market products with our brand, but continue to declare the orignianl manufacturer. This is done with the usual EN980 symbol and no other reference. We have never had any difficulty. We do license our brand to them which provides some protection (as per the last paragraph here: http://www.mhra.gov.uk/Howweregulat...lDevicesDirective/Ownbrandlabelling/index.htm)
 
Thread starter Similar threads Forum Replies Date
A Clinical assessment sample size - Medical device Class IIb implantable (93/42 directive) EU Medical Device Regulations 2
J Interesting Discussion Sample Size Determination for Medical Device Other Medical Device and Orthopedic Related Topics 19
R Determining Sample Size for Medical Device Component Validation Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
N Sample Size Justification for Medical Device Shelf-Life Inspection, Prints (Drawings), Testing, Sampling and Related Topics 13
D Design Verification for special 510(k) - Size modification to an existing medical device 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 7
R Sample Size for PCB used in a Medical Device Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
L Where to CE Mark a Class I medical device the size of a small tablet EU Medical Device Regulations 1
M CE Mark Size Requirement - Class I Medical Device EU Medical Device Regulations 8
Y Inspecting Glued Components - Bubble size - Medical Device Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
J Medical Device QC Testing - Number of Samples as Batch Size Increases ISO 13485:2016 - Medical Device Quality Management Systems 13
H Sample Size Calculation (Confidence Interval and Reliability) - Medical Devices Reliability Analysis - Predictions, Testing and Standards 9
P Sterile Medical Packaging and Shelf Life Validation Sample size ISO 13485:2016 - Medical Device Quality Management Systems 10
N What is a good Sample Size for Pelletized Plastic Beads? (Medical) Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
A Sample Size for Design Verification (Prototype Testing) for Medical Devices Qualification and Validation (including 21 CFR Part 11) 12
Q Acceptable Visible Particulate Size on Sterile Medical Devices Inspection, Prints (Drawings), Testing, Sampling and Related Topics 13
D Minimum Size of Control Sample in Medical Research Lab Work Statistical Analysis Tools, Techniques and SPC 2
C Attribute Data - What is the required sample size (medical field)? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 14
K Sample Size Determination - Medical Devices Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
S IFU Font Size - Specified by any regulations for medical devices on sale in the US? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 8
K Size of Quality Department ISO 13485:2016 - Medical Device Quality Management Systems 11
A Determine subgroup size-newbie Statistical Analysis Tools, Techniques and SPC 6
Q Gage Pin Sets? Calibrate/Verify them all or just a sample size? General Measurement Device and Calibration Topics 22
S How to determine sample size to test when the acceptance criteria is x >= Standard value? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 7
R Customer feedbacks sampling size EU Medical Device Regulations 4
T Sample size calculation Using Minitab Software 3
C What Theory is MIL-STD-105E Sample Size Code Letters Based on? Quality Tools, Improvement and Analysis 3
E Commercial batch size Manufacturing and Related Processes 0
Y FMEA link to Control Plan frequency and sample size FMEA and Control Plans 19
T Noob question regarding sample size Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
A VDA 19.2 Illig value vs. allowed particle size VDA Standards - Germany's Automotive Standards 4
S Help needed in choosing the method of calculating the minimum sample size Internal Auditing 12
D Estimate Sample Size for very rare event Using Minitab Software 1
R Regulations on Controlled Document Size (Paper Size) Document Control Systems, Procedures, Forms and Templates 4
S Determining Sample Size and Method Quality Tools, Improvement and Analysis 11
C Complaint Return Sample Size Question 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
Eva lee Which is the range for the validated batch size(for example ±5%, 10%) is acceptable? Manufacturing and Related Processes 8
A +0/-.001 Tolerance question - Feature size is 1.249 +0/-.001 - Actually measures 1.2493 (.0003 OHL Inspection, Prints (Drawings), Testing, Sampling and Related Topics 12
shimonv Frequency and sample size for lot release of EtO sterilized products EU Medical Device Regulations 2
P Sample Size for Distribution Simulation Testing Inspection, Prints (Drawings), Testing, Sampling and Related Topics 11
C Stress / Challenge Conditions for Design Verification Testing to Reduce Sample Size 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 11
K How can Acceptance Number and Reject Number be larger than Sample Size on Z1.4 Table? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
J Validation Sample Size for Tray Seal Qualification and Validation (including 21 CFR Part 11) 4
D Design Verification Sample Size vs Repeats Statistical Analysis Tools, Techniques and SPC 9
M Minimum sample size - Guidance and statistical rationale Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
P Unrealistic Packaging Validation Sample Size 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 41
J Control chart for huge sample size Statistical Analysis Tools, Techniques and SPC 9
S Is there a standard for sample size during R&D phase Other ISO and International Standards and European Regulations 18
J SPC - Stamping parts - Small batch size Statistical Analysis Tools, Techniques and SPC 6
J Sample size definition in an Automotive SMT pilot lot run Misc. Quality Assurance and Business Systems Related Topics 1
E Correct way to certify hydrostatic testing when it is not 100% (and Sample Size) Various Other Specifications, Standards, and related Requirements 6

Similar threads

Top Bottom