SPC for productivity - Monitor the productivity level?

M

margherita

#1
I am looking for some suggestions to introduce a stat. tool to monitor the productivity level of our assembly process (we produce connectors) At the moment we collect the qty produced per day and compare it with a goal.
I'd like to use a tool like the XR charts helpful to see an out of control signal but at the same tome this tool has to be able to induce the operators to produce "more"!
Any help?

------------------
 
Elsmar Forum Sponsor
D

Don Winton

#2
<FONT COLOR="RED"><BLOCKQUOTE>At the moment we collect the qty produced per day and compare it with a goal.</BLOCKQUOTE></FONT></P>

Hmmm. Would it not be more worthwhile to determine production capability and then determine optimum output as determined by this capability.

<FONT COLOR="RED"><BLOCKQUOTE>XR charts helpful to see an out of control signal but at the same tome this tool has to be able to induce the operators to produce "more"!</BLOCKQUOTE></FONT></P>

Former true, latter false.

Same Rant, different thread.

<FONT COLOR="#990099">It is a mistake to try to push an SPC apparatus where it neither adds value nor contributes to your productivity. Haphazardly using SPC usually causes more harm than good. This should be on your mind.</FONT>

End Rant.

Regards,
Don
 
Thread starter Similar threads Forum Replies Date
P SPC for machining processes Capability, Accuracy and Stability - Processes, Machines, etc. 1
earl62 What is the best way to control special characteristics in Control plan? Is it Mandatory to have SPC for IATF 16949? IATF 16949 - Automotive Quality Systems Standard 7
J SPC - Stamping parts - Small batch size Statistical Analysis Tools, Techniques and SPC 6
T Attributes SPC study - Attributive control (Go gage) Statistical Analysis Tools, Techniques and SPC 5
S Anyone Familiar with "SPC for Excel" add-in? Lean in Manufacturing and Service Industries 4
G Assignable cause/corrective action list for SPC Software Statistical Analysis Tools, Techniques and SPC 3
H SPC for special characteristics - CSR - Control of SC and CC Statistical Analysis Tools, Techniques and SPC 1
J Determining SPC tolerance Statistical Analysis Tools, Techniques and SPC 21
L SPC - Methods to collect data IATF 16949 - Automotive Quality Systems Standard 7
Marc Steve Prevette's Statistical Process Control (SPC) "Library" Statistical Analysis Tools, Techniques and SPC 0
A SPC for Eddy Current Testing Statistical Analysis Tools, Techniques and SPC 28
S SPC (Statistical Process Control) for Unilateral Tolerance - Questions Statistical Analysis Tools, Techniques and SPC 6
Proud Liberal Informational Use of Classical SPC in Precision Machining Statistical Analysis Tools, Techniques and SPC 9
J Recommendations on Inspection/SPC Software Statistical Analysis Tools, Techniques and SPC 4
Q Real Time Electronic SPC/Control Charting Statistical Analysis Tools, Techniques and SPC 4
Rameshwar25 Other types of Control Charts described in Chapter II of SPC Manual Statistical Analysis Tools, Techniques and SPC 6
A Electric terminal crimping machines - Is SPC appropriate for this process? Manufacturing and Related Processes 4
J Properly understanding SPC - Newbie SPC questions Statistical Analysis Tools, Techniques and SPC 29
bobdoering SPC Charting frequency calculator for X hi/lo chart Imported Legacy Blogs 0
bobdoering Handy training tip for SPC - the Check Engine Light Analogy Statistical Analysis Tools, Techniques and SPC 0
QMMike SPC Software for MAC computers Statistical Analysis Tools, Techniques and SPC 2
Marc SPC based Dashboards - By Steve Prevette (November 2017) Statistical Analysis Tools, Techniques and SPC 1
H SPC Work Instructions (WI) Statistical Analysis Tools, Techniques and SPC 2
S Doubts about SPC taken in Machining - Part has +-0.01 Tolerance Statistical Analysis Tools, Techniques and SPC 5
A Short Term vs. Long Term SPC Study - Where is Cp and Cpk Defined Statistical Analysis Tools, Techniques and SPC 8
E SPC for Dummies - The correct meaning of all the graphs Statistical Analysis Tools, Techniques and SPC 3
Tagin Can/should SPC be applied to Computer Assembly and Software Imaging? Statistical Analysis Tools, Techniques and SPC 8
P Recommendations on SPC Software or Excel SPC add-in(s) Quality Assurance and Compliance Software Tools and Solutions 6
A Not all characteristics follow a Normal Distribution - How do you do SPC Chart Capability, Accuracy and Stability - Processes, Machines, etc. 5
T SPC in Insurance Back Office Operations Service Industry Specific Topics 4
C SPC for Particulate Alert/Action Levels Statistical Analysis Tools, Techniques and SPC 3
E SPC Production - Getting Cpk and Ppk Statistical Analysis Tools, Techniques and SPC 8
M SPC with many data points from one dimension Statistical Analysis Tools, Techniques and SPC 16
Q Mixed data collection (SPC) for different mold cavities Statistical Analysis Tools, Techniques and SPC 2
M How to Start SPC from the ground up! Statistical Analysis Tools, Techniques and SPC 8
bobdoering Available SPC and Metrology Consultants Paid Consulting, Training and Services 0
I SPC on Cyclic Data Statistical Analysis Tools, Techniques and SPC 10
S SPC Card for One Sample Size - Customer requires for all critical dimensions Statistical Analysis Tools, Techniques and SPC 8
R Quality Management & SPC Manufacturing and Related Processes 1
B Is SPC data For Special Characteristics always required? TS 16949 clause 8.1 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
S How to Start SPC in a Shaft Grinding Section Statistical Analysis Tools, Techniques and SPC 1
A I-MR SPC used for Inspection Statistical Analysis Tools, Techniques and SPC 7
E SPC data from multiple Excel files Statistical Analysis Tools, Techniques and SPC 5
S Where to Get SPC Training to Measure our Processes? Training - Internal, External, Online and Distance Learning 12
P SPC Short Run Advice of a Stamping Process Statistical Analysis Tools, Techniques and SPC 3
G SPC in Heat Treatment Workshop Statistical Analysis Tools, Techniques and SPC 2
S SPC Control Limit Calculation Statistical Analysis Tools, Techniques and SPC 2
O Establishing SPC for small batches of 10-15 units Statistical Analysis Tools, Techniques and SPC 10
A SPC for Single Batch Nickel Plating Process Capability, Accuracy and Stability - Processes, Machines, etc. 5
M SPC - What Data do I Collect? Statistical Analysis Tools, Techniques and SPC 4

Similar threads

Top Bottom