SR-001 Revision - Keep watching for the new revision of SR001 (It is expected soon)

J
#1
Those who are interested to know the transition related issues,keep watching for the new revision of SR-001.It is expected soon.CBs and certified organizations not yet planned the transition may need to wake up now unless they believe that an extension of date will be possible due to efforts to delay transition.
 
Elsmar Forum Sponsor

Stijloor

Staff member
Super Moderator
#2
Re: SR-001 Revision - Keep watching for the new revision of SR001 (It is expected soo

Those who are interested to know the transition related issues,keep watching for the new revision of SR-001.It is expected soon.CBs and certified organizations not yet planned the transition may need to wake up now unless they believe that an extension of date will be possible due to efforts to delay transition.
A quick bump.

Comments? Feedback?

Thank you very much!!

Stijloor.
 

Sidney Vianna

Post Responsibly
Staff member
Admin
#3
Re: SR-001 Revision - Keep watching for the new revision of SR001 (It is expected soo

The revised SR001 was posted yesterday (see attached), together with the new message:
Go to OASIS for details: www.iaqg.org/oasis

Dear OASIS User,

The IAQG Other Party Management (OPMT) has updated the Supplement Rules Document (SR001 - Dated 04 Nov 2011) that provides transition expectations for our stakeholders (e.g., Accreditation Bodies and Certification Bodies). The document was updated to incorporate lesson learned and provide additional clarification of intent. The transition timeline and expectations as outlined in previous versions did not change. In addition to the updated rule, the Frequently Asked Questions (FAQ) link can also be used by stakeholders to further clarify the rules for transition.

All IAQG member companies are onboard and fully committed to working with certified organizations and industry stakeholders to successfully transition to the revised Industry Controlled Other Party (ICOP) Aerospace Quality Management System (AQMS) 9100/9110/9120:2009 standards.
We expect certified organizations that have not completed transition yet to focus on planning for success, and provide a declaration of conformance to their certification body by their next required surveillance or re-certification audit.
Companies that are "transitioning" are encouraged to use available resources such as the Supply Chain Management Handbook (SCMH) and the IAQG Requirements website, which contain detailed gap analysis and change presentation materials.
There is still a lot of work to be done to ensure that transition is completed in a timely manner and established targets met.
The whole community built a consensus on an aggressive action plan to deliver the necessary changes and obtain the required data and report the transition status. It includes:
Creating a common reporting matrix for tracking 9100/9110/9120:2009 transition activities;
Certification Bodies to coordinate with certified organizations to schedule the remaining transition audits and report transition schedules via the common reporting matrix in order to set objectives based on estimated transitions of the whole community;
Setting a target date for completion of the 9100/9110/9120:2009 certified organization transition common reporting matrix (January 4, 2012);
Accreditation Bodies to assimilate CB matrix data and report to the OPMT and Sector Management Structure (SMS) committees.
! Congratulations to those certified organizations that have completed transition to the updated standard and received their revised 9100, 9110 or 9120 certificates. This demonstrates commitment to meeting industry expectations and improved quality performance.
The Other Party Management Team (OPMT) will continue to work with all stakeholders by communicating transition status and progress as we approach the July 1, 2012 target date.
Thank you!
Tim Lee
Chair IAQG OPMT
 

Attachments

Thread starter Similar threads Forum Replies Date
A Domain of the component (EASA CM No.: CM-SWCEH-001 Issue 01 Revision 02) Point 9.3.3 (Usage domain aspects) EASA and JAA Aviation Standards and Requirements 0
M Informational ANVISA – NOTA TÉCNICA 001/2019/GEMAT/GGTPS/ANVISA – Assuntos de Petições da Gerência de Tecnologia de Materiais de Uso em Saúde Medical Device and FDA Regulations and Standards News 0
A Microcontroller: Discussion about EASA CM - SWCEH - 001 EASA and JAA Aviation Standards and Requirements 1
S Non-Normal Data - Measurement for "straightness" with a 0.001" max tolerance Capability, Accuracy and Stability - Processes, Machines, etc. 10
A Boeing D1-4426 Code 001 - Supplier Compliance to Exhibit III AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
K Chromate Colour Issue - Yellow Chromate per AIPS02-05-001 Various Other Specifications, Standards, and related Requirements 4
T DITE(UK)-2011-IO-001 - Do you know anything about this code? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
E Blueprint Notation Question - Print dimension like 4.312 g +.002 -.001 Quality Manager and Management Related Issues 14
Sidney Vianna IAQG Guidance PCAP 001 - Competence Management Guideline AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
E Source Inspection Minimum Qualifications - Complex PWAs and PWBs - SOW and J-Std-001 Career and Occupation Discussions 2
M Resolution question - Measuring a product on a CMM - the tolerance is .000/.001 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
1 IPC/EIA J-STD 001 to 004 for Solder Specification Various Other Specifications, Standards, and related Requirements 9
L IPC/EIA J-STD-001 (soldering) revisions (Want to replace IPC-A-610) Various Other Specifications, Standards, and related Requirements 5
apestate Calibrating .001" resolution Dial Calipers - Calibration and safeguarding procedure General Measurement Device and Calibration Topics 6
S Changing revision status of a reviewed document Manufacturing and Related Processes 4
M Quality Manual - Where does Revision History Section go? Document Control Systems, Procedures, Forms and Templates 8
G IATF Rules for COVID 5th revision - Re-certification audit timing IATF 16949 - Automotive Quality Systems Standard 3
B Revision 5 to IATF Coronavirus Pandemic (Covid -19) IATF 16949 - Automotive Quality Systems Standard 0
Q Version/Revision Control of CAD files Document Control Systems, Procedures, Forms and Templates 2
L Does a backdate form format can be changed if wrong revision is used? Document Control Systems, Procedures, Forms and Templates 8
B New Release of CQI-12 Coatings Process (Revision 3- Release date- 7/2020) Customer and Company Specific Requirements 2
M Gap analysis on ISO 14971:2019 with previous revision ISO 14971 - Medical Device Risk Management 8
M Is There a Revision History or Change Log for Canadian Regulations? Canada Medical Device Regulations 3
C SOP unification. Revision No, Revision history Document Control Systems, Procedures, Forms and Templates 4
I Dating controlled documents after changes - Revision History Document Control Systems, Procedures, Forms and Templates 13
I Revision History Date - date of updates or date of release? ISO 13485:2016 - Medical Device Quality Management Systems 2
J ISO 14001 revision process ISO 14001:2015 Specific Discussions 1
B CQI-11 (Plating Audit) - New revision updates IATF 16949 - Automotive Quality Systems Standard 0
P Proposed revision of IEC 62304 - 2019 IEC 62304 - Medical Device Software Life Cycle Processes 6
I Tracking Protoype Changes; 8D or simple document revision? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
A The latest revision number and changes in automotive core tools IATF 16949 - Automotive Quality Systems Standard 1
L Getting Notice of Revision and Accessing Public Draft Copies of ISO Standards Service Industry Specific Topics 2
M Informational ISO 14971 / ISO TR 24971 revision update – atualizações sobre a revisão Medical Device and FDA Regulations and Standards News 1
M Document Control - Revision Number in Document Names Document Control Systems, Procedures, Forms and Templates 4
L VDA 1 Documented Information and Retention (new revision 4, August 2018) VDA Standards - Germany's Automotive Standards 0
M Informational ISO TC 210 JWG 1 meeting in São Paulo – Revision of ISO 14971 and ISO TR 24971 – Medical Device Risk Management Medical Device and FDA Regulations and Standards News 0
M Revision of a Form which is a Procedure Attachment Document Control Systems, Procedures, Forms and Templates 1
S IMS Manual Review and Revision Prior to Audit ISO 14001:2015 Specific Discussions 4
2 First Article Requirements for Revision Changes of Engineering AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
ScottK Question for Auditors on 7.1.4 in the ISO9001:2015 revision ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
C Document Control - old revision vs new revision Document Control Systems, Procedures, Forms and Templates 22
R Clinical evaluation Meddev (2.7.1 revision 4) - Example or Template EU Medical Device Regulations 4
Paul Simpson Informational The role of Annex SL - High Level Structure of ISO MSS's - Revision Update February 2019 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 26
T ISO 9004:2018 Revision - Released April 2018 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 9
Brizilla Knowledge of the upcoming ISO 17025 Revision ISO 17025 related Discussions 5
Q Change revision number in document when only codification was changed Document Control Systems, Procedures, Forms and Templates 8
Sam Lazzara Preferred Location for Revision History Section in Documents Document Control Systems, Procedures, Forms and Templates 16
Marc When will Revision 5 of the AIAG FMEA Manual be released? FMEA and Control Plans 93
S Pre-release version of the upcoming AIAG FMEA Revision 5 FMEA and Control Plans 1
J Is there a specification that provides directions on Drawing Revision Changes Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5

Similar threads

Top Bottom