Definition Standard - Definition of a Standard

D

D.Salman

#1
Dear Experts,
I was looking for the definition of Standard, and I got the following:
Standard: The metric, specification, gauge, statement, category, segment, grouping, behavior, event or physical product sample against which the outputs of a process are compared and declared acceptable or unacceptable.
Kindly, may I have one example about, specification, gauge, statement, and behavior?
Many thanks in advance
Omar
 
Elsmar Forum Sponsor

harry

Super Moderator
#2
Wiki is your friend:

A technical standard is an established norm or requirement. It is usually a formal document that establishes uniform engineering or technical criteria, methods, processes and practices. A technical standard can also be a controlled artifact or similar formal means used for calibration.

A standard can be developed privately or unilaterally, for example by a corporation, regulatory body, military, etc. Standards can also be developed by groups such as trade unions, and trade associations. Standards organizations usually have more diverse input and usually develop voluntary standards: these might become mandatory if adopted by a government, business contract, etc.

The standardization process may be by edict or may involve the formal consensus of technical experts.
For further details, look at: Standard
 
U

Umang Vidyarthi

#3
Dear Experts,
I was looking for the definition of Standard, and I got the following:
Standard: The metric, specification, gauge, statement, category, segment, grouping, behavior, event or physical product sample against which the outputs of a process are compared and declared acceptable or unacceptable.
Kindly, may I have one example about, specification, gauge, statement, and behavior?
Many thanks in advance
Omar
Hello Salman,

Why one?Examples are aplenty.

Specifications: Dimensions given in drawings,Material specs.for a product,specs. of thickness,bonding & quality for special processes viz. Painting,Plating,Coating etc.,Specific percentage of ingredients in a material like carbon%age for DQ,DD,&EDD in steel.

Gauge: Plug/Thread Plug gauges,Feeler gauge,radius gauge,Depth gauge,Height gauge etcetra;the list is long.

Statement: Mission,Vision,Quality,Environment,Safety etc.

Behavior: Codes of conduct.

Hope this helps

/Umang :bigwave:
 
Thread starter Similar threads Forum Replies Date
A ISO 9000 Standard "standard" definition ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
K Creating together Standard Definition for Prevention and Detection FMEA FMEA and Control Plans 1
O What is the definition of d.c component in standard IEC 60601-2-10? IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
X What is the standard definition about "Engineering Specification"? IATF 16949 - Automotive Quality Systems Standard 3
P Boeing D6-51991 Quality Assurance Standard for Digital Product Definition AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
J IMDS Standard material number, definition - AISI 1008 steel RoHS, REACH, ELV, IMDS and Restricted Substances 12
A Definition Performance standard - What does that mean? Definition Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 3
B Definition Standard Measurement Methods - Definition Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 5
A Is there a standard on tolerances of substances ? Medical Device and FDA Regulations and Standards News 0
P Pooled Standard Error - Minitab Statistical Analysis Tools, Techniques and SPC 0
SABRINA DJILALI SAIAH Implementation of the ISAS-MEDIA 9001 standard in a TV channel ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
Sidney Vianna Interesting Discussion Should ISO 9004 be changed from a guidance standard to a requirements standard? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
B European Harmonized vs IEC standard IEC 62366 - Medical Device Usability Engineering 2
Moumen H Variations between ASTM A29 Standard for steel bars and Mill test certificates specs Manufacturing and Related Processes 1
D Which ISO Standard to purchase? ISO 13485:2016 - Medical Device Quality Management Systems 7
K IEC 60601-1:2005/AMD2:2020, Why this standard version is 3.0? IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
C Standard -Machinist Handbook Customer Complaints 4
N EN 813, EN 12277, EN 1497 - Testing some harness prototypes to an EN standard Various Other Specifications, Standards, and related Requirements 0
R Remote Audits for ISO 9001 (or any other standard) General Auditing Discussions 31
S Which department should prepare the control plan? could you show me a standard regarding to this matter. FMEA and Control Plans 17
Y Auditory alarm standard IEC 60601-1-8 Reliability Analysis - Predictions, Testing and Standards 0
M Does the ISO 9001:2015 standard require a disaster recovery plan or emergency response plan ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 16
S Shore A hardness Tester Acceptance Criteria Standard Elsmar Cove Forum Suggestions, Complaints, Problems and Bug Reports 2
Sidney Vianna What ISO Standard (under the TC 176) supports the UN Sustainable Development Goal #10? ASQ, ANAB, UKAS, IAF, IRCA, Exemplar Global and Related Organizations 11
John Broomfield Vote - Should ISO9004 Become a Requirements Standard? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
Q EN ISO 13485:2016/AC:2018 - AC:2018 being stated in the applicable harmonized standard listing Other ISO and International Standards and European Regulations 1
J SAE J1739 standard IATF 16949 - Automotive Quality Systems Standard 2
Marcel DS LV 123 - BMW, AUDI, Mercedes Standard VDA Standards - Germany's Automotive Standards 1
F Standard Calibration Procedures: Recommended Practice ISO 17025 related Discussions 0
M FDA News FDA Releases Draft Guidance Clarifying Application of ISO 10993-1 Biocompatibility Standard Medical Device and FDA Regulations and Standards News 0
Y UL 1998 Standard: software classes Software Quality Assurance 0
G What to do with correction factors overlooked by an accredited standard (6.4.11)? ISO 17025 related Discussions 5
G Copy of withdrawn ISO 9001:1994 Quality Management Standard ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
Anonymous16-2 SOP (Standard Operating Procedure) Numbering Document Control Systems, Procedures, Forms and Templates 7
Ed Panek Compliance with Standards? When a standard is updated/revised CE Marking (Conformité Européene) / CB Scheme 3
Skooma Deburring and Tolerances - Is there a Standard for deburring or removing material? Manufacturing and Related Processes 3
B Purchasing AS9100D Standard in Japanese AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
O In addition to the standard, what other ISO 13485 sources do people recommend? ISO 13485:2016 - Medical Device Quality Management Systems 5
B ASTM E18-2020 - Rockwell testing standard changes? General Measurement Device and Calibration Topics 2
M Informational RoHS Standard - EN 63000:2018 to replace EN 50581:2012 Medical Device and FDA Regulations and Standards News 11
M IEC 60601-1 1988 - Device developed in 2012 with standard of 1988 IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
D Recent changes to ISO 14971 - SOP required for managing standard revisions ISO 13485:2016 - Medical Device Quality Management Systems 1
P Cenelec updated standard information CE Marking (Conformité Européene) / CB Scheme 1
S Is there a standard for sample size during R&D phase Other ISO and International Standards and European Regulations 18
J Standard used to determine if check fixture gauge is acceptable Reliability Analysis - Predictions, Testing and Standards 2
N Program or application for standard time measurement in industry from video surveillance? Human Factors and Ergonomics in Engineering 1
I Where can I beg, steal (just kidding of course) or borrow good training material on the ISO 9001:2015 standard? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
K Question on whether IEC 60601-2-62 standard is applied IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
B Clause 5.1.12 of Technical Standard IEC 62304/A1 IEC 62304 - Medical Device Software Life Cycle Processes 5
M Viable count Measurement ISO Standard Other Medical Device Related Standards 1

Similar threads

Top Bottom