Study About Raw Materials (Polymers) - DSC, FTIR,TGA, and SEM Images

V

vivkrish

#1
Dear friends,

Can Anyone help me to get all the data about Raw materials.

instantly I need DSC, TGA, FTIR graph for all polymers.

Anyone pl share

Regards,
Vivkrish
 
Elsmar Forum Sponsor

Ninja

Looking for Reality
Trusted Information Resource
#2
Re: Study About Raw Materials (Polymers)

Hello Vivkrish,

That is like asking for all information on trees....thousands of books worth that wouldn't fit in any library.

You may want to start a relationship with a university in your area that works with polymers.

Even before doing that, you will want to narrow your scope of question..."all polymers" is many thousands of Gigs of data...it is a question so large that it cannot be answered.
 
V

vivkrish

#3
Re: Study About Raw Materials (Polymers)

Hello Ninja

As per your guidance I'll go with plastic materials not all polymers.

Thanks for your info.

If any one have typical graph of DSC, FTIR,TGA, SEM images for plastic materials kindly share.

Thanks in advance.
 

Marc

Fully vaccinated are you?
Staff member
Admin
#4
Re: Study About Raw Materials (Polymers)

This is relatively extensive - You might want to "Google" a bit. I did some quick searches on DSC, FTIR,TGA, and SEM and there is a lot of research information out there. I even found a few discussion forums where they discuss each of these.
 
V

vivkrish

#6
Hello Mr.Ninja

Thank you very much for your support.

Here the FTIR spectra for Poly corbonate not found in that website.

Can I get any link to find DSC TGA spectra for plastics.

Thanks..
 
S

SteveK

#7
If you simply put in DSC, FTIR, TGA or SEM in front of the polymer name in Google you will get e.g. for Polycarbonate - “Images for DSC Polycarbonate” possibly as the first or second item listed. It seems straightforward to me.

Steve
 

v9991

Trusted Information Resource
#8
Generally they are part of the technical literature - application notes from respective vendors;

I am not sure if they are available as a repository;

you can get some picture of FTIR from pharmacopoeia, but not for all. (only the ones covered in monographs)
 
V

vivkrish

#9
If you simply put in DSC, FTIR, TGA or SEM in front of the polymer name in Google you will get e.g. for Polycarbonate - “Images for DSC Polycarbonate” possibly as the first or second item listed. It seems straightforward to me.

Steve
Thanks dear..
 
Thread starter Similar threads Forum Replies Date
V MSA - Using a R&R study for a Tape Measure Reliability Analysis - Predictions, Testing and Standards 18
P Brexit Germany - Import Medical Device For Clinical Study EU Medical Device Regulations 0
M EU MDR - Retrospective Study for expanding indications of a legacy device EU Medical Device Regulations 0
Miner Reported content: Post in thread 'Form of real time study for establish shelf time' Document Control Systems, Procedures, Forms and Templates 1
A Form of real time study for establish shelf time Reliability Analysis - Predictions, Testing and Standards 4
S Capability Study for Leak Tester Capability, Accuracy and Stability - Processes, Machines, etc. 9
A % STUDY VARIATION VS. % TOLERANCE Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 31
A IATF MSA study Type 1 General Measurement Device and Calibration Topics 7
M Type 1 Gage r study Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
A Mistakes in the CQE Study Guide Misc. Quality Assurance and Business Systems Related Topics 3
Nihls MSA Study Type 2 (special conditions ) IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
D What are the acceptance criteria/requirements for Stability Study? General Measurement Device and Calibration Topics 7
S 95% UCL - Attaching an excel for recovery study Statistical Analysis Tools, Techniques and SPC 0
Nihls MSA Study Type 1 (CMM) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
D Low risk IVD study in the UK, do I need MHRA approval? UK Medical Device Regulations 1
M MSA Study Type 1 not capable. We are at the limit. And manufacturing wants to continue producing. Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
cnbrosa Study Type 1 on a CMM using a measuring support Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
M Lean: Conducting Capacity Study, calculating Cycle times on laser cutting machines Lean in Manufacturing and Service Industries 2
P MSA study for visual system with artifical inteligence Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
A Capability Study - in the beginning of your career what should you have known about the tool Quality Tools, Improvement and Analysis 11
Q Capability study with a minimum spec Statistical Analysis Tools, Techniques and SPC 8
E Use of OQ cleared batch for stability and clinical study use ISO 13485:2016 - Medical Device Quality Management Systems 0
S Study sign off question / responsibilities ISO 13485:2016 - Medical Device Quality Management Systems 3
M ISO 9001:2015 case study sample ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
M Case study help as per ISO 9001: 2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 18
M Case study solution help required as per ISO 9001 : 2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
M Case study resources ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1
S A clinical performance evaluation study with an IVD product as Investagional Use product - Clinical Monitor requirements 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 4
T Attributes SPC study - Attributive control (Go gage) Statistical Analysis Tools, Techniques and SPC 5
S Capability or Gage R&R Study for Leak Tester? Reliability Analysis - Predictions, Testing and Standards 15
N % Tolerance - Type 1 study on the gages, then a gage R&R (ANOVA) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
M Definitive answer on Type 1 vs Type 2 vs Type 3 Gage Study Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 0
D Gage R&R Study on Load Cells - Large chemical blending tanks IATF 16949 - Automotive Quality Systems Standard 1
A CE Mark and PMCF study EU Medical Device Regulations 3
Q % Study variation low, % tolerance high - GR&R Interpretation help Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
A Gauge Study for Small Lots Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
K IATF & Attribute Study requirements IATF 16949 - Automotive Quality Systems Standard 9
T Correct MSA study for an automated camera system which makes attribute inspection Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
DuncanGibbons Looking for example aerospace part CAD files to be used for a case study Career and Occupation Discussions 2
B Minitab Type 1 Gage Study on True Position Question Measurement Uncertainty (MU) 1
L ASQ CBA biomedical auditor - CBA primer material is enough to study? ISO 13485:2016 - Medical Device Quality Management Systems 6
S Machine Setup for a CNC Machine Capability Study Capability, Accuracy and Stability - Processes, Machines, etc. 1
M Brazil forced degradation study requirements Reliability Analysis - Predictions, Testing and Standards 0
P RAC-US Spring 2020 Study group_Discussions Professional Certifications and Degrees 23
M Custom Medical Device For Clinical Study Other Medical Device Regulations World-Wide 1
G Capability Study for Tapped Hole Reliability Analysis - Predictions, Testing and Standards 3
R PMCF plan to justify that our product not require PMCF study EU Medical Device Regulations 9
E How much a bioequivalence study will cost in the UK Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 0
A Gage type 1 study on CMM Capability, Accuracy and Stability - Processes, Machines, etc. 2
N MSA Study for a Leak Testing Device Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6

Similar threads

Top Bottom