Study concerning adoption of and migration to ISO 9001:2015

  • Thread starter ProjetISO9001M2MDI
  • Start date
P

ProjetISO9001M2MDI

Dear group members,

As students of Management and Industrial development at IAE Savoie Mont Blanc we are conducting a study concerning the chapter “Organizational knowledge” of the standard.

Our aim is to gain a better understanding of the the complexity of the changes and the challenges, opportunities and risks entailed by them.

In order to achieve this, we would like to access the experiences and opinions of professionals like yourself.

Therefore we developed a questionnaire to help us elicit your opinion concerning the standard, as well as its influence on your company.
Filling in the questionnaire should take between five and ten minutes.

We thank you very much for the attention and time you invest in our project.

Below the link to the questionnaire:
https://goo.gl/forms/VIya2LDrPoOR5EOU2

We are equally looking forward to hear from you regarding any comments and questions you might have regarding the project!

Best regards

the project team ISO9001 M2 MDI of the IAE Savoie Mont Blanc.

Morgan, Mohamed, Iliasse, Sebastian
 
Last edited by a moderator:

Sidney Vianna

Post Responsibly
Leader
Admin
We are equally looking forward to hear from you regarding any comments and questions you might have regarding the project!
Good luck on the data gathering.

There is one thing you need to be aware of, in this type of survey. In most cases, the people who would answer surveys such as yours, are the same people who, typically are employed to ensure their respective organizations attain and maintain certification. Because of that, they have an intrinsic bias and lean towards the aggrandizing of the reasons for the certifications they manage and/or are responsible for.

So, when you aggregate the results, be aware of the potential bias by respondents.
 
Thread starter Similar threads Forum Replies Date
P On-going stability study requirement for medical device US Food and Drug Administration (FDA) 2
S Summative Study before Phase 3? Human Factors and Ergonomics in Engineering 4
J What Device Should I use for Gage Study? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
S Cmk study with fewer samples Statistical Analysis Tools, Techniques and SPC 1
T Clinical Study Design for IVD Self-Test (lay user) Products UK Medical Device Regulations 0
M HOW TO Self Study on IATF 16949:2016? IATF 16949 - Automotive Quality Systems Standard 8
Z Design verification test sample size under the scope of first in human study submission in Europe Medical Device and FDA Regulations and Standards News 3
L MSA study Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
H AIAG MSA: 4th Edition (Bias Study) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
P RAC Certification Study group UK Medical Device Regulations 0
M ASQ certification study material Professional Certifications and Degrees 1
I Clinical study suppliers (service providers) -- extent of control ISO 13485:2016 - Medical Device Quality Management Systems 4
P Type of MSA study according to measurement equipment Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
J Using real time shelf life study as accelerated ISO 13485:2016 - Medical Device Quality Management Systems 1
T Gage R&R study - Ordinal data Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
F Using non-randomized clinical study for change in existing 510(k) device? US Food and Drug Administration (FDA) 1
E Which regulatory framework for an app-based study for research purposes? EU Medical Device Regulations 1
M Registry study in Europe CE Marking (Conformité Européene) / CB Scheme 1
P 21 CFR 58 GLP Periodic Study Phase Inspection Report Other US Medical Device Regulations 0
Aymaneh Clinical study CE Marking (Conformité Européene) / CB Scheme 1
adztesla Equivalency study - Comparing 2 similar equipments Reliability Analysis - Predictions, Testing and Standards 1
M Early feasibility study V&V requirements Design and Development of Products and Processes 2
D Regulatory Affairs Certification (RAC) Devices Exam - Autumn 2022 study Professional Certifications and Degrees 3
M RAPS RAC Device - Looking for resources / prep materials & study group Professional Certifications and Degrees 7
V MSA - Using a R&R study for a Tape Measure Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 19
P Brexit Germany - Import Medical Device For Clinical Study EU Medical Device Regulations 0
M EU MDR - Retrospective Study for expanding indications of a legacy device EU Medical Device Regulations 0
Miner Reported content: Post in thread 'Form of real time study for establish shelf time' Document Control Systems, Procedures, Forms and Templates 1
A Form of real time study for establish shelf time Reliability Analysis - Predictions, Testing and Standards 4
S Capability Study for Leak Tester Capability, Accuracy and Stability - Processes, Machines, etc. 9
A % STUDY VARIATION VS. % TOLERANCE Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 31
A IATF MSA study Type 1 General Measurement Device and Calibration Topics 7
M Type 1 Gage r study Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
A Mistakes in the CQE Study Guide Misc. Quality Assurance and Business Systems Related Topics 11
Nihls MSA Study Type 2 (special conditions ) IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
D What are the acceptance criteria/requirements for Stability Study? General Measurement Device and Calibration Topics 7
S 95% UCL - Attaching an excel for recovery study Statistical Analysis Tools, Techniques and SPC 0
Nihls MSA Study Type 1 (CMM) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
D Low risk IVD study in the UK, do I need MHRA approval? UK Medical Device Regulations 1
M MSA Study Type 1 not capable. We are at the limit. And manufacturing wants to continue producing. Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
cnbrosa Study Type 1 on a CMM using a measuring support Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
M Lean: Conducting Capacity Study, calculating Cycle times on laser cutting machines Lean in Manufacturing and Service Industries 2
P MSA study for visual system with artifical inteligence Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
A Capability Study - in the beginning of your career what should you have known about the tool Quality Tools, Improvement and Analysis 11
Q Capability study with a minimum spec Statistical Analysis Tools, Techniques and SPC 8
E Use of OQ cleared batch for stability and clinical study use ISO 13485:2016 - Medical Device Quality Management Systems 0
S Study sign off question / responsibilities ISO 13485:2016 - Medical Device Quality Management Systems 3
M ISO 9001:2015 case study sample ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
M Case study help as per ISO 9001: 2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 18
M Case study solution help required as per ISO 9001 : 2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 1

Similar threads

Top Bottom