SBS - The best value in QMS software

Subcontracting of Tests and Calibration - ISO 17025 Clause 4.5

krishkaar

Involved In Discussions
#1
Ours is a Testing Laboratory seeking Accreditation to ISO 17025:2005.
We carry-out Calibration required (for all our Test Equipments) with an external agency (NABL Accredited).

Is the requirements of Sec 4.5 to be addressed by us?
 
Elsmar Forum Sponsor

Hershal

Metrologist-Auditor
Staff member
Super Moderator
#2
Ours is a Testing Laboratory seeking Accreditation to ISO 17025:2005.
We carry-out Calibration required (for all our Test Equipments) with an external agency (NABL Accredited).

Is the requirements of Sec 4.5 to be addressed by us?
The calibration technically comes under Clauses 4.6 and 5.6.2.1.1, but 4.6 in terms of management of the calibration.

If you send out something for testing that may be within your scope, then Clause 4.5 applies.

Hope this helps.
 
Thread starter Similar threads Forum Replies Date
A Subcontracting Inspections and Tests - ISO 17020:1998 clause 14.2 General Measurement Device and Calibration Topics 9
K Subcontracting of Tests and Calibrations - ISO 17025 Sec: 4.5 ISO 17025 related Discussions 11
M Subcontracting a repair of Medical Devices Canada Medical Device Regulations 0
D Subcontracting specification developer duties US Food and Drug Administration (FDA) 5
D Subcontracting Clinical Evaluations EU Medical Device Regulations 1
T Is Testing in a Third Party Facility Subcontracting? General Measurement Device and Calibration Topics 2
G Subcontracting work (manufacturing) to another company location EASA and JAA Aviation Standards and Requirements 4
N Managing Subcontracting Process - Material Traceability from Warehouse to Processing ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
C Establishment Register Question - Subcontracting - Blood Glucose Monitor System 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 11
J Subcontracting and Control Issues - Class I Medical Devices with Measuring Function ISO 13485:2016 - Medical Device Quality Management Systems 5
Q FAI Help - Subcontracting out all manufactured items (PCB & machined parts) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 4
A Definition Subcontracting vs. Outsourcing - Differences Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 3
J Class IIa Medical Device and Subcontracting questions ISO 13485:2016 - Medical Device Quality Management Systems 3
A Definition Outsourcing vs. Subcontracting - The Differences Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 11
J ISO 9001 procedures content - Subcontracting electrical and instrumentation Document Control Systems, Procedures, Forms and Templates 6
T Supplier subcontracting requirements and Distributor requirements Supplier Quality Assurance and other Supplier Issues 5
S Definition Outsource - Outsourcing - Subcontracting - Definition - TS 16949 and ISO 9001 Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 14
R Subcontracting Finished Product ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
V External Processes - Subcontracting - Control Requirements ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
E Routine production tests - dielectric voltage withstand test IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
B IEC 61010-1 - Voltage / Dielectric strength tests IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
Q Old products new class - Dental Devices - Choosing tests EU Medical Device Regulations 2
G Supplier flowdown verification of tests and revisions Supplier Quality Assurance and other Supplier Issues 0
O Is it mandatory for Medical Devices to work properly after dielectric strength tests? IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
K Changes in process dispersion, and location hypotheses tests Using Minitab Software 3
M MDR requires the NB to perform "tests in order to check that the quality management system" EU Medical Device Regulations 3
Z EN 868-8 "required tests" - Rigid sterilization containers Other Medical Device Related Standards 0
M Define voltage and frequency to perform tests 61010-1 and 61326-1 for CE certification CE Marking (Conformité Européene) / CB Scheme 4
M Informational US FDA Final Guidance – Coronary, Peripheral, and Neurovascular Guidewires – Performance Tests and Recommended Labeling Medical Device and FDA Regulations and Standards News 0
C ABS plastic : which IEC 60601-1 tests to redo? IEC 60601 - Medical Electrical Equipment Safety Standards Series 6
J GLP accreditation for mechanical tests of medical device? Other Medical Device and Orthopedic Related Topics 1
M Routine testing of medical electrical systems - What specific electrical safety tests should be performed? IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
A Touch current in single fault conditions test and earth leakage current in normal conditions test, are they really different tests? IEC 60601 - Medical Electrical Equipment Safety Standards Series 8
O Statistical justification of sampling size in V&V tests ISO 13485:2016 - Medical Device Quality Management Systems 5
T Tests IEC 60601-1 - Grounding Resistance, Leakage Current and Dielectric Rigidity in an automated way IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
John Predmore A Balanced view of statistical tests Statistical Analysis Tools, Techniques and SPC 3
N ECoG/EEG electrodes - Required IEC 60601-1 tests IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
D API 6A Chokes - PR1 / PR2 Tests Oil and Gas Industry Standards and Regulations 12
E 2 participants in inter-laboratory comparison tests ISO 17025 related Discussions 3
O Is Patient Cable Exempted from EFT Tests? (IEC 60601-1-2) CE Marking (Conformité Européene) / CB Scheme 1
R Room requirements for electrical tests in devices ISO 13485:2016 - Medical Device Quality Management Systems 2
M EN60601-1-2 4th edition requirements - Tests for devices produced in two options IEC 60601 - Medical Electrical Equipment Safety Standards Series 6
S Clarification regarding tests in IEC 60601-2-25 IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
F Sample Size for Biocompatibility Tests Other Medical Device Related Standards 4
T List of Tests - IEC 61010-1, 3rd edition and IEC 60601-1, 3.1 edition IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
Gamula Biocompatibility GLP conform tests outside China China Medical Device Regulations 1
W Equipment for Oven Calibration, Uniformity and System Accuracy Tests AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
T ISO 17025 Section 5.9.1 - Assuring Quality of Tests - Requirements ISO 17025 related Discussions 4
K VDA 2 Requirements of Tests for PPA VDA Standards - Germany's Automotive Standards 2
W CPU BIST IEC 62304 - Embedded code has CPU instruction tests IEC 62304 - Medical Device Software Life Cycle Processes 2

Similar threads

Top Bottom