Re: Any suggestions and ideas on calibration training for my technicians and myself?
Kat, Hershal and some others are constantly posting seminars, training sessions, and the like here. So, be sure and stay informed about upcoming events.
Below is some information that I have received about calibration training. NOTE: I have yet to use the product, and I have no affiliation to them. However, I have spoken with the gentleman on the phone, and was impressed with the course structure and layout. So anyway.... FYI:
[FONT="]Measurement Quality[/FONT]
[FONT="]A thorough knowledge and understanding of measurement science is central to ISO 9001, 16949, 17025, AS 9100 and Z540 series.[/FONT]
[FONT="]Further, FDA, and other regulatory standards support the application of measurement standards. [/FONT]
[FONT="]All of the following courses come with
CEU’s and complete testing and documentation in the form of a Certificate of
Competency. [/FONT]
[FONT="]Precision Measurement Series[/FONT]
[FONT="]Introduction to Measurement and Calibration –(also Spanish
, and Chinese) 4 hours[/FONT]
[FONT="]Precision Electrical Measurement -6-8 hours[/FONT]
[FONT="]Precision Dimensional Measurement 6-8[/FONT]
[FONT="]Precision Pressure Measurement -6[/FONT]
[FONT="]Precision Flow Measurement -6[/FONT]
[FONT="]Precision Mass Measurement -6[/FONT]
[FONT="]Precision Force/Torque Measurement -6[/FONT]
[FONT="]Precision Humidity Measurement -6[/FONT]
[FONT="]Precision Temperature Measurement -6[/FONT]
[FONT="]Measurement Uncertainty -15[/FONT]
[FONT="]Level II Titles[/FONT]
[FONT="]Dimensional: Surface Texture, Roundness, Hardness -10[/FONT]
[FONT="]Acoustics and Vibration -10[/FONT]
[FONT="]Time and Frequency -10[/FONT]
[FONT="]AC/DC Metrology -10[/FONT]
[FONT="]Microwave Principles -10[/FONT]
[FONT="]Fiber Optics Part I -10[/FONT]
[FONT="]Test Equipment Operation and Calibration -15[/FONT]
[FONT="]CMM’s[/FONT]
[FONT="] Water Quality: pH and Conductivity[/FONT]
[FONT="] Pipettes[/FONT]
[FONT="]Certified Calibration Technician Exam Prep -20-30[/FONT]
[FONT="]Uncertainty Management -10[/FONT]
[FONT="]Metrology Applications for Engineers and Scientists-10+[/FONT]
[FONT="]ISO/IEC 17025 Compliance[/FONT]
[FONT="]Uncertainty Management[/FONT]
[FONT="]Introduction to 17025 for Technicans[/FONT]
[FONT="]Audit/Assessment to 17025[/FONT]
[FONT="]Interval Analysis[/FONT]
[FONT="]Proficiency Testing[/FONT]
[FONT="] Computer and Software Management Verif and Validation-In Development[/FONT]
[FONT="]Scheduled Workshops[/FONT]
- [FONT="]Oct 6-7, 2008, SPC for Metrology [/FONT]
- [FONT="]Oct 8-10, Measurement Uncertainty
NCSLI Training Center
Boulder, CO [/FONT]
[FONT="]We can assist your organization with:[/FONT]
- [FONT="]Qualifying, selecting and monitoring calibration suppliers, domestic and international [/FONT]
- [FONT="]17025 and ANSI Z540.x consulting and training [/FONT]
- [FONT="]Pre-audit assessment and gap analysis [/FONT]
- [FONT="]Achieving ISO 17025 Accreditation [/FONT]
[FONT="]Paul Hanssen, Pres[/FONT]
[FONT="]WorkPlace Training, Inc[/FONT]
[FONT="]
www.wptraining.com -
demo and detailed course outlines[/FONT]