T&E Supplier Process FMEAs

L

louie

#1
#1
Clarification Please:

As a T&E supplier, should our process FMEAs be on the customer's process or on our build process?

We have been using the process FMEA to address out build processes internally plus installation processes. Is there a set "right" way to do process FMEAs?
 
12 questions to ask before buying a QMS
Elsmar Forum Sponsor
L

louie

#2
#2
Thanks Dan.

I hope your response will convince the engineers, here, what the scope of process fmeas really is.

Thanks again.
 
D

Dan De Yarman

#3
#3
Your Process FMEA is used to address your process for making whatever you make. Make sure you redefine the occurences scale if you don't mass produce your items. You can define whatever is appropriate for your business, just document it. Keep in mind your threshold for PFMEA might also need to be adjusted to fit your process.

Good luck,

Dan
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
Marc T&E Supplier Process FMEAs QS-9000 - American Automotive Manufacturers Standard 0
J Sub-supplier change from manual to automated process - same specs - Report to FDA? 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
B Supplier of design and manufacture process ISO 13485:2016 - Medical Device Quality Management Systems 10
S Process Map for Supplier Process Maps, Process Mapping and Turtle Diagrams 5
J IATF 16949 8.4.1.2 Supplier selection process IATF 16949 - Automotive Quality Systems Standard 4
R Supplier related drawings and verification of process requirements - Source Inspection AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
A Supplier Process Audits - Creation of Reports General Auditing Discussions 3
J Recomended Values - Auditing process in a supplier IATF 16949 - Automotive Quality Systems Standard 18
A Supplier - Process Validation Manufacturing and Related Processes 3
A IATF 16949 Cl. 8.4.1.2 Supplier Selection Process - assessment example IATF 16949 - Automotive Quality Systems Standard 11
J Simple supplier evaluation qualification process form that includes Risk Assessment Document Control Systems, Procedures, Forms and Templates 2
B IATF 16949 Clause 8.4.1.2 - Supplier Selection Process - Service Providers IATF 16949 - Automotive Quality Systems Standard 11
L Supplier Approval Process – Should the Quality Department be Excluded? Misc. Quality Assurance and Business Systems Related Topics 7
P Challenge Supplier Process Audits to VDA 6.3 VDA Standards - Germany's Automotive Standards 1
R Supplier Process Review and Issue Communication SOP/Form help wanted Supplier Quality Assurance and other Supplier Issues 4
C Customer control of supplier's process Misc. Quality Assurance and Business Systems Related Topics 5
B Supplier has process to use material in quarantine Nonconformance and Corrective Action 11
S SAE AS9015 Supplier Self Verification Process - Delegation Programs. AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
T What is the difference between Supplier and Outsourced Process? Supplier Quality Assurance and other Supplier Issues 8
T Process Validation, NPD (New Product Development), and Supplier Management Qualification and Validation (including 21 CFR Part 11) 7
S Supplier Disapproval Decision Process Federal Aviation Administration (FAA) Standards and Requirements 2
T ISO 9001 Clause 7.4.1 Purchasing Process (Supplier Approval) ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
V Plating Supplier PPAP Revalidation Requirements - A-Coat GM 9984132 Plating Process APQP and PPAP 1
V Supplier?s PPAP - Production Process Control Plan Review, Evaluation and Approval? FMEA and Control Plans 5
somashekar Who is the Supplier in this Process? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
Q SCAR Process SCAR that works for Class III Medical Device Supplier Management Supplier Quality Assurance and other Supplier Issues 4
T Supplier Spray Process Audit - Fish Eye, Spray Dust and Fiber Dust Defects Manufacturing and Related Processes 8
I Supplier (Vendor) Contract Review Process Contract Review Process 11
Q AS9100 Clause 7.4.1 Purchasing Process and Approved Supplier List Records AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 37
K Supplier Performance and Supplier Rating Process - AS9100 Requirements AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 12
P Approved Suppliers - ISO 13485 Normal Supplier Qualification Process Requirements ISO 13485:2016 - Medical Device Quality Management Systems 9
R Suppliers Defects found during Production Process - Supplier Scorecards Quality Tools, Improvement and Analysis 6
Q Supplier Special Process System Assessments - CSR Requirements Customer and Company Specific Requirements 2
B Supplier changed their Manufacturing Process - Is a PPAP resubmission required? APQP and PPAP 17
N Supplier Process Change Request Procedures, Forms and Flow Charts Document Control Systems, Procedures, Forms and Templates 3
S Document Process Flow though the company - NQA-1 Supplier Document Control Systems, Procedures, Forms and Templates 1
D Confusion in writing a SIPOC (Supplier, Input, Process, Output, Customer) Six Sigma 5
Moncia Supplier Re-Evaluation Process and Requirements ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
Q Required Supplier Process Controls under 4.1 and 7.4 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 9
I Do company sales agents/distributors need to go through supplier evaluation process? Other Medical Device and Orthopedic Related Topics 5
T Supplier - Outsourced process IT management Supplier Quality Assurance and other Supplier Issues 3
A Supplier Quality Process Audit Rev5.0 Supplier Quality Assurance and other Supplier Issues 11
quality1 Initial Supplier Evaluation Method - 7.4.1 Purchasing Process ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
B Outlining a Supplier Quality Assurance Process Supplier Quality Assurance and other Supplier Issues 1
K Auditing the Internal Vendor (Supplier) Management Process Supplier Quality Assurance and other Supplier Issues 2
H Getting A Supplier to use SPC (Statistical Process Control) Supplier Quality Assurance and other Supplier Issues 5
C Small Company Supplier Management Process ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
S Supplier Development Process failed - Question regarding sub-suppiler audits IATF 16949 - Automotive Quality Systems Standard 4
Z SMT and Sheet Metal Supplier Process Audit Checklist Supplier Quality Assurance and other Supplier Issues 5
A GM Supplier Quality Focus Process Information Supplier Quality Assurance and other Supplier Issues 3

Similar threads

Top Bottom