Table that compares ISO 9000:2000 vs. ISO 17025

V

veronica_leon75

#1
iso 17025

:bonk:

Hi Guys, Does anyone have a table that compares ISO 9000:2000 versus ISO 17025 ?

Many Thanks

Veronica
 
Elsmar Forum Sponsor
T

tomvehoski

#2
I have not seen a direct comparison to date, but there is a chart in the appendix of 17025 that compares to ISO 9001: 1994. There is also a chart in ISO 9001: 2000 to ISO 9001: 1994, so I guess you could use both charts with the 1994 standard as a reference point.

Tom
 
A
#3
Verónica, I don't have it but this is the index of 17025, i think it is very helpful for you
Contents Page
Foreword..................................... iv
Introduction ................................. v
1 Scope .............................. 1
2 Normative references .... 1
3 Terms and definitions ... 2
4 Management require 2
4.1 Organization................... 2
4.2 Quality system ............... 3
4.3 Document control .......... 4
4.4 Review of requests, tenders and contracts ................................................................................................ 5
4.5 Subcontracting of tests and calibrations.................................................................................................... 5
4.6 Purchasing services and supplies............................................................................................................... 6
4.7 Service to the client....... 6
4.8 Complaints ..................... 6
4.9 Control of nonconforming testing and/or calibration work ...................................................................... 7
4.10 Corrective action............ 7
4.11 Preventive action ........... 8
4.12 Control of records.......... 8
4.13 Internal audits ................ 9
4.14 Management reviews..... 9
5 Technical requirements .............................................................................................................................. 10
5.1 General.......................... 10
5.2 Personnel...................... 10
5.3 Accommodation and environmental conditions ......................................................................................11
5.4 Test and calibration methods and method validation ............................................................................. 12
5.5 Equipment .................... 15
5.6 Measurement traceabi 16
5.7 Sampling....................... 18
5.8 Handling of test and calibration items....................................................................................................... 18
5.9 Assuring the quality of test and calibration results................................................................................. 19
5.10 Reporting the results... 19
Annex A (informative) Nominal cross-references to ISO 9001:1994 and ISO 9002:1994................................... 23
Annex B (informative) Guidelines for establishing applications for specific fields........................................... 24
Bibliography..............................
 
Thread starter Similar threads Forum Replies Date
B Operator protection - When to apply table 7, Dielectric strength test voltage IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
C IEC 60601-1-8, difference between table 4 and annex D IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
M AQL table - I need to sample 1250pcs AQL - Acceptable Quality Level 3
S ISO 18223-2 Temperature symbol in the Legend table in the Instructions for Use Other ISO and International Standards and European Regulations 4
K About ionizers - How far can we place a table top ionizer from the IC devices Manufacturing and Related Processes 1
M Applicability of IEC 60950-1 Table K2 - Minimum clearances between circuits Various Other Specifications, Standards, and related Requirements 0
E IEC 60335-1 power input deviation - Table 1 Values Other ISO and International Standards and European Regulations 0
T Determination of TENSION SAFETY FACTORS - Table 21 IEC 60601-1 Other Medical Device Regulations World-Wide 5
M Informational IMDRF final document – Assembly and Technical Guide for IMDRF Table of Contents Submissions Medical Device and FDA Regulations and Standards News 4
A Minitab 18: How to automate GRR Summary Table save Reliability Analysis - Predictions, Testing and Standards 1
M Informational Publication of Draft Health Canada Implementation Guidance for the International Medical Device Regulators Forum Table of Contents Format Medical Device and FDA Regulations and Standards News 0
Marc Interesting Discussion The periodic table is 150 years old - March 2019 Coffee Break and Water Cooler Discussions 3
M Oxygen enriched environment applicability - Operating table used in general surgeries in hospital IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
A ISO 2859 Single Sampling - Clarification regarding the sampling table Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
L Established a c=0 "AQL" or "RQL" table AQL - Acceptable Quality Level 5
D Pasting table on OASIS new database AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 0
B IATF 16949 Table of Contents IATF 16949 - Automotive Quality Systems Standard 1
K Process FMEA Ranking Table for for Landing Door of an Elevator FMEA and Control Plans 7
N Include homogeneity uncertainty into budget table for thermocouples Measurement Uncertainty (MU) 1
P Question on Table 6 "Test voltages for solid insulation forming a MEANS OF PROTECTION IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
L CQI-12 2nd Edition - Table D, question 2.1 - Powder Coat Painting IATF 16949 - Automotive Quality Systems Standard 2
L Table 2-A from ISO 2859-1 - AQLs from 150 to 1000 Reliability Analysis - Predictions, Testing and Standards 2
S Please review my Risk Analysis Table ISO 14971 - Medical Device Risk Management 13
G BCARs/EASA to ISO9001/AS9100 cross reference matrix/table wanted EASA and JAA Aviation Standards and Requirements 1
M Auditor has requested that the granite table in the lab be Calibrated Calibration and Metrology Software and Hardware 19
D NIST HDBK 44 Table T.3. Class III Tolerance in Divisions Clarification General Measurement Device and Calibration Topics 4
N Use of arrows in ISO 2859-1 Table 1 and 2-A sampling plan Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
M ASTM Stainless Steel Density Table Various Other Specifications, Standards, and related Requirements 1
K FMECA (Critical Analysis) Format and Ranking Table AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
R Weight Sets for Checking Table Balances Quality Assurance and Compliance Software Tools and Solutions 5
Marc What Airlines Really Charge (In 1 Simple Table) Travel - Hotels, Motels, Planes and Trains 6
A Should the Table of Contents be held to a revision? Document Control Systems, Procedures, Forms and Templates 3
R Performance Qualification on a Table Top Centrifuge ISO 13485:2016 - Medical Device Quality Management Systems 3
S Data for Analysis - Construction Industry Table of Data for Analysis ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
L Flat Surface Granite Table Calibration Requirements Calibration Frequency (Interval) 16
B Which is the current Risk Management table? ISO 14971 - Medical Device Risk Management 2
A Auditor Man-Day table for ISO 50001 (Energy Management Systems) Sustainability, Green Initiatives and Ecology 3
B Cross-reference list/table between HTM 2010 and ISO 17665 Other Medical Device Related Standards 1
J Comparison table between ISO 20000 and ISO 9001 IT (Information Technology) Service Management 7
J Expanding the c = 0 Small Lot Squeglia Table Sampling Plan Inspection, Prints (Drawings), Testing, Sampling and Related Topics 12
P IEC 60601-2-25:2011 Comparison Table (ECG, Diagnostic) IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
V Updated Clean Room Classification Table of ISO 14644 Other ISO and International Standards and European Regulations 2
C AS9100 C Requirement for a Document and Data Control Table AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
J CQI-9 Table E, 4.1 - Heat Treating Process Requirements Other ISO and International Standards and European Regulations 2
Proud Liberal Table of Capability Indices - Copy from Minitab to Excel Using Minitab Software 3
C Creating a Multiple Table SQL (Structured Query Language) Query in Minitab Using Minitab Software 10
S Help with Table of Constants and Formulas for Control Charts Statistical Analysis Tools, Techniques and SPC 5
S Where can I find a (Methods-Time Measurement) MTM-UAS Table? Human Factors and Ergonomics in Engineering 1
R How to decide a suitable contact time from table 23 of IEC 60601-1:2005 IEC 60601 - Medical Electrical Equipment Safety Standards Series 6
K Multiple Comparison in Chi Square - More than 2 Rows/Columns in Contingency Table Using Minitab Software 9

Similar threads

Top Bottom