Talsico Process Picture Map software to write their procedures / work instructions?

RCW

Quite Involved in Discussions
#1
Talsico software

Does anybody out there use Talsico Process Picture Map software to write their procedures / work instructions?

I was investigating into it since it looks like a pretty nice package (even tho' it has a hefty price tag). I was curious if anybody has been using it and has an opinion one way or another.

Thanks!
 
Elsmar Forum Sponsor

Marc

Fully vaccinated are you?
Leader
Admin
#2
I haven't used it, but it looks nice. I checked it out at:

http://www.talsico.com/demo1.htm

If anyone else is using this I'd sure like to hear any comments as well.

On the other hand, if you like the format there are a number of software packages you could do this with.
 
B

Bigfoot

#3
Talsico PPM's

Marc said:
I haven't used it, but it looks nice. I checked it out at:

http://www.talsico.com/demo1.htm

If anyone else is using this I'd sure like to hear any comments as well.

On the other hand, if you like the format there are a number of software packages you could do this with.
Marc, Could please expand on the other software packages to do this? I did a trial / evaluation of the Talsico product about 7 months back and I thought then that it did a very nice job of presenting all of the relevant information to an operator for the application. I agree with the previous assessment that it is a bit on the pricey side, especially since it is primarily a macro based add on to MS Word. Currently we are developing our own standard format using Word based documents to provide standardized work instructions and it is time consuming for our Doc Control Admin. Any input on this will be appreciated.
 
Thread starter Similar threads Forum Replies Date
D Seeking info on Talsico products - Mainly on their PPM software Quality Assurance and Compliance Software Tools and Solutions 0
I Are suppliers required to hand over process validation reports? ISO 13485:2016 - Medical Device Quality Management Systems 3
S Process Monitoring using SPC software Quality Assurance and Compliance Software Tools and Solutions 3
PQ Systems Introducing Process Improvement to New Employees Using SQCpack Software 0
Quality Runner Continuous monitoring of validated process – sample sizes 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
H What kind of chart to detect WHEN a in-process NC is about to occur? Reliability Analysis - Predictions, Testing and Standards 2
FuzzyD ISO 13485 change in process ISO 13485:2016 - Medical Device Quality Management Systems 3
S Combo Product Assembly Process OQ Qualification and Validation (including 21 CFR Part 11) 0
V Process revalidation periodic criteria Manufacturing and Related Processes 5
G Fully refurbishing process EU Medical Device Regulations 3
A Information on Process-based Internal Auditing Needed Internal Auditing 6
Sortinghat Auditing the Manufacturing Process IATF 16949 - Automotive Quality Systems Standard 3
V Process Owner Quality Management System (QMS) Manuals 1
S Measurment of DPU/DPMO in Assembly process Capability, Accuracy and Stability - Processes, Machines, etc. 1
J Can you have one Core Process (PEAR) with multiple plants? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
D "FAI" Requirements/Process for New Supplier Materials Design and Development of Products and Processes 3
W Nonconforming-Material Process Nonconformance and Corrective Action 1
S Performance Qualification and Process Validation ISO 13485:2016 - Medical Device Quality Management Systems 5
K Sr Process Engineer (Hillsboro, OR) - SPC Program Focused - Ultra Clean Technology Job Openings, Consulting and Employment Opportunities 0
S RFQ Process Automotive Supplier Quality Assurance and other Supplier Issues 1
M Vendor selection process AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
T Process Potential estimation for binary data Capability, Accuracy and Stability - Processes, Machines, etc. 3
M Attempting to Poke Yoke a wire crimping process...need help Design and Development of Products and Processes 3
D Machine rebuilds versus process re-validation IATF 16949 - Automotive Quality Systems Standard 1
G Does TPI agencies comes under outsourced process as per Q1 Oil and Gas Industry Standards and Regulations 11
Q What is Process Auditing? Process Maps, Process Mapping and Turtle Diagrams 9
Z PSW approval process for production IATF 16949 - Automotive Quality Systems Standard 2
G Process Validation Before/After Sterilization? Design and Development of Products and Processes 3
A Layered Process Audits for Medical Device Manufacturing? ISO 13485:2016 - Medical Device Quality Management Systems 3
Derrick Yang 各国医疗器械上市流程的区别 (Differences in the listing process of medical devices in various countries) Service Industry Specific Topics 3
A " I, as a 3rd party auditor, retain the obligation to determine whether or not the process is "effective"... Discuss. Registrars and Notified Bodies 5
J Process capability analysis in ISO 9001:2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
E Comparing process parameters on non-normal batches Capability, Accuracy and Stability - Processes, Machines, etc. 11
M How to apply IEC 62304 Problem Resolution Process for bugs discovered prior to release i.e. during initial development? IEC 62304 - Medical Device Software Life Cycle Processes 2
I In-Process Inspection Raw Data ISO 13485:2016 - Medical Device Quality Management Systems 3
M How to show the effect of the failure mode on the manufacturing process as a customer of product design process? FMEA and Control Plans 3
V MDL/MDEL private label process Canada Medical Device Regulations 8
B Vision system process validation Manufacturing and Related Processes 1
G Is Quoting a Process with Objectives? Manufacturing and Related Processes 19
D IATF 16949 Process Map IATF 16949 - Automotive Quality Systems Standard 19
J 9001 Internal Audit of Client Onboarding process ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
B SPECIAL PROCESS VALIDATION & REVALIDATION Qualification and Validation (including 21 CFR Part 11) 4
Q Is engineering a process and should it have its own process turtle? IATF 16949 - Automotive Quality Systems Standard 7
I Post Market Surveillance Process EU Medical Device Regulations 3
C Process owner for Supplier Controls ISO 13485:2016 - Medical Device Quality Management Systems 11
H API monogram 4F - Certification process Oil and Gas Industry Standards and Regulations 2
C Handling in-Process Defect Repairs Nonconformance and Corrective Action 31
B How to satisfy clause 5.7.1.5 process validation for valve production API 6D Oil and Gas Industry Standards and Regulations 13
C Change Management Process ISO 14971 - Medical Device Risk Management 8
B Documents for production process IATF 16949 - Automotive Quality Systems Standard 8

Similar threads

Top Bottom