SBS - The Best Value in QMS software

Tell Me All About PPAP (Production Part Approval Process)

sushant_kulkarni

Involved In Discussions
#1
Dear all,

1) What does PPAP make a differance from other documents?

2) What is significance of PPAP ?

3) Give me exact idea of Quality control engg. for PPAP work ?

4) How we approch PPAP submission ?

5) How can we relate PPAP with TS-16949 ?

6) Can anyone relate PPAP with TS using CAUSE?

7) Does all u people say that Quality std. improve with PPAP submission ?

8) As process requirrment significance run means what? and if batch type

production how can any company produced 300 parts at a time when their

monthly requirement is around 20-30 nos.?:D

Regards,

Sushant kulkarni
 
Elsmar Forum Sponsor

Miner

Forum Moderator
Staff member
Admin
#2
Re: Only For The Ppap

Some of these questions would require a small book to respond. With the type and depth of your questions, I strongly recommend that you obtain the Automotive Industry Action Group's (AIAG) PPAP manual. It would probably answer most of your questions.

2) What is significance of PPAP ? It is a Production Part Approval Process (PPAP) that will help ensure that the product and process is capable of meeting requirements prior to launch.

5) How can we relate PPAP with TS-16949 ? It is a requirement of this standard.

7) Does all u people say that Quality std. improve with PPAP submission ? Not necessarily the standard, but the product quality should improve if it is done correctly.

8) As process requirrment significance run means what? and if batch type production how can any company produced 300 parts at a time when their monthly requirement is around 20-30 nos.? The PPAP manual has a section on bulk material/batch processes.
 

sushant_kulkarni

Involved In Discussions
#4
Re: Only For The Ppap

Some of these questions would require a small book to respond. With the type and depth of your questions, I strongly recommend that you obtain the Automotive Industry Action Group's (AIAG) PPAP manual. It would probably answer most of your questions.

2) What is significance of PPAP ? It is a Production Part Approval Process (PPAP) that will help ensure that the product and process is capable of meeting requirements prior to launch.

5) How can we relate PPAP with TS-16949 ? It is a requirement of this standard.

7) Does all u people say that Quality std. improve with PPAP submission ? Not necessarily the standard, but the product quality should improve if it is done correctly.

8) As process requirrment significance run means what? and if batch type production how can any company produced 300 parts at a time when their monthly requirement is around 20-30 nos.? The PPAP manual has a section on bulk material/batch processes.
I have PPAP 4th addition with me.

Where is Batch production specification?
 
C

cbhigdon3

#7
Re: Tell Me All About What PPAP Is

We always joke that PPAP stands for 'Please Prepare Additional Paperwork'.
In all seriousness, though, the AIAG standard guide is relatively inexpensive and is a great introduction to the subject. On a side note, we've been having a debate at our location about whether or not a customer PPAP submission is required if you increase capacity by adding "like equipment". For instance, let's say you produce a widget using a XX machine and you add another XX machine that uses the exact same parameters and has the same process goal. Is notifying the customer a requirement?

Just curious how other s feel about this one.

Thx,
CBH
 

Miner

Forum Moderator
Staff member
Admin
#8
Re: Only For The Ppap

I have PPAP 4th addition with me.

Where is Batch production specification?
Clarify your meaning for batch. I interpreted it as a bulk process such as batch mixing, etc. If you intended it as the the manufacture of discrete units in a lot, then the standard sections of the PPAP process apply.
 
Thread starter Similar threads Forum Replies Date
M Informational Some things the EU MDR 2017/745 does not tell you, but you may need to know to comply with it effectively – Part 1 Medical Device and FDA Regulations and Standards News 0
G Can anyone tell me about Tooling FMEA FMEA and Control Plans 3
O Which is better - Quietly quit using a supplier or tell supplier? Supplier Quality Assurance and other Supplier Issues 11
R Can anyone tell me requirements standards for insufflator? Other Medical Device Related Standards 1
C Quick - Tell me everything you know about TS 16949! LOL IATF 16949 - Automotive Quality Systems Standard 5
V Tell me about AS9015 Requirement for the delegation of Product Verification AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 10
M Tell me about Benchmarking Benchmarking 4
N How can you tell if Flame Retardant "kicks off" in plastic? Manufacturing and Related Processes 4
R Can anybody tell me about p & np chart? Capability, Accuracy and Stability - Processes, Machines, etc. 4
B How do I tell my boss to write neatly without offending her? Career and Occupation Discussions 8
Jim Wynne Do you have an e-reader? Tell us about it Coffee Break and Water Cooler Discussions 16
F Can you tell me if this table is correct? Gage R&R Problems Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 12
T What does the Gage R&R results tell about my Accept/Reject Decisions? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
C Can SEM or other methods tell if reballed Solder spheres are Leaded or RoHS Manufacturing and Related Processes 3
B Can somebody tell me about Lithium Ion Battery pack related standards Other Medical Device Related Standards 4
1 How can you tell that Sample Data represents the Population Six Sigma 23
S What to tell your Employees prior to an Audit General Auditing Discussions 21
1 How I can tell whether or not my QMS is MDD compliant EU Medical Device Regulations 4
N Score One for the Team - I had to ball up and tell the bosses Coffee Break and Water Cooler Discussions 7
C To tell or not to tell. Internal Auditing 32
L SCAR (Supplier Corrective Acton Request) Responses - How much do you tell? Nonconformance and Corrective Action 8
H Can you tell me a suitable "tooling" for Caliper Calibration - ISO 17025 ISO 17025 related Discussions 16
A AS9100 Implementation software to tell each of us all about AS9100 requirements Training - Internal, External, Online and Distance Learning 3
S Could someone tell me what are the results of a Gage R&R & how to interpret it? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
Jim Wynne Another way to tell that you've got too much money Coffee Break and Water Cooler Discussions 16
A Tell me how the APQP process is followed - What are the steps it includes APQP and PPAP 2
S Please tell me how to start doing an FMEA FMEA and Control Plans 6
K Implementing ISO 9001 - I need it all! Please tell me the bare bones! ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 27
Wes Bucey When do we tell customers and regulators we have a problem? Quality Manager and Management Related Issues 9
G AMS 2750 - Tell me what troubles, specifically, you have had with AMS 2750 Various Other Specifications, Standards, and related Requirements 4
B Tell me How to Write a Quality Manual Quality Management System (QMS) Manuals 32
K Tell me why I should no longer reference MIL STD 105E? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 16
M Show us what you make or Tell us what you do! Coffee Break and Water Cooler Discussions 58
M How do I tell my boss I'm not qualified to do Internal Audits? Internal Auditing 32
F Tell me about Layered Process Audits (LPA) Process Audits and Layered Process Audits 2
I Tell me about Documentation Systems Document Control Systems, Procedures, Forms and Templates 5
P Who can tell me the difference between TPS (Toyota Production System) and Lean? Lean in Manufacturing and Service Industries 2
P Kaizen Blitz - Who can tell me how to do Kaizen Blitz? Lean in Manufacturing and Service Industries 9
C Gage R&R study definition - Results for GRR is .0005 - What does this number tell me? Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
Marc How do you tell which car is more American? World News 0
J What is required to tell customers after Audit where nonconformances are found IATF 16949 - Automotive Quality Systems Standard 20
J Tell me about the 18th ABBE Principle General Measurement Device and Calibration Topics 2
Marc Execs tell regulators Sarbanes-Oxley (SOX) Costs exceed Benefits World News 0
M Definition DCX - Can someone tell me what is DCX stands for? DaimlerChrysler? Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 4
ScottK How to tell the difference between 303 and 316 Stainless Steel Bar Stock? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
A Can anyone tell how do we do inprocess inspection of raw materials Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
F AS 9110 Accreditation - Can anyone tell me what to expect? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
B VDA 4902 - Can anyone tell me what this is? Various Other Specifications, Standards, and related Requirements 5
Marc Baseball Fan? Microsoft will tell you which parts of a game are 'exciting' Coffee Break and Water Cooler Discussions 2
S Can anybody tell me what the legal status of the Part Submission warrant (PSW) is? APQP and PPAP 3

Similar threads

Top Bottom