Tensile test machine, tinius olsen 602

#1
Dear friends
i am using tensile test machine, tinius olsen 602 to conduct a tensile test for Glass-fiber composite. i am facing problem of using an extensometer from Epsilon (gage length is 25 mm). I have connected the extensometer to the tensile test machine(tinius olsen 602) through the ethernet cable but it is still not recognized by the software and the strain comes from the crosshead displacement. the Software that belongs the machine is Horizon . could you please help me out and guide me towards the necessary procedures to conduct the tensile test with the extensometer.


Any help you can give would be much appreciated.

khalid
 
Elsmar Forum Sponsor

Ninja

Looking for Reality
Trusted Information Resource
#2
Hello Halid, welcome to The Cove...

You are asking about a software interface and capabilities...you'll want to contact both T.O. (link) and Horizon to address this.
There is little or nothing we can offer toward a software compatibility issue from the outside...sorry.
I hope that someone else here has faced the EXACT SAME problem, but it is unlikely.

If you do a search in Google for "horizon software for tinnius olsen" you can get a couple of pdf downloads that may help....

HTH
 
Thread starter Similar threads Forum Replies Date
P Test Method Validation for Tensile Strength Tester Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
R Tensile Test Strain Rate - Impact on the Test Results Manufacturing and Related Processes 3
T Destructive Tensile Test Sampling Gage R&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 9
S Marking of Tensile Test Specimen Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
7 Data Analysis of Tensile Strength Test - Graphical Presentation of Results Statistical Analysis Tools, Techniques and SPC 2
Z ISO 3108 Wire Rope Tensile Test Methods General Measurement Device and Calibration Topics 3
optomist1 Tensile Test Crimped Electrical Terminal Acceptance Criteria Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
S Needs clarification on tensile test on SS class F 431 material as per ASTM A 473 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
H Destructive Tensile Pull Test Gage R&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
Q Ford's for material test methods for tensile strength, compression deflection, etc. Customer and Company Specific Requirements 4
M What distribution should I expect a tensile strength test to fit? Statistical Analysis Tools, Techniques and SPC 10
M MSA Study for tensile tester - Its difficult to do an MSA study on a destructive test Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
T Tensile / Pull test standards / Specimens - 14 mil vinyl interior products Quality Tools, Improvement and Analysis 6
D Gage R&R - Destructive Test - Tensile Tester Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 19
O MSA for Destructive Tests - Tensile test as an example Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
E 60601-1 - Tilt testing - Tensile safety factor IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
lanley liao Purchase Acceptance Criteria - Tensile testing Oil and Gas Industry Standards and Regulations 2
Q Interpreting Tensile Charts General Measurement Device and Calibration Topics 0
M Testing Tensile Strength of Materials AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
A Tensile Strength Testing of Rubber Underwear Manufacturing and Related Processes 2
D Raw Material chemical/Tensile Requirements Specifications (QQ-A-250/4, etc) AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
M ASTM F 75-12 - Tensile properties Product castings ( 7.1 ) vs Casting alloys ( 7.2) Other ISO and International Standards and European Regulations 1
K How do you select the right grips for your tensile tests? Imported Legacy Blogs 0
E IEC 60601-1 Tensile Load Safety Factor IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
alonFAI Gauge R&R for a Peel Tester (tensile tester) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 11
Q Tensile Testing Transfer from one site to another site Manufacturing and Related Processes 2
D Manual Tensile Testing Pull Rate Speed Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
R MU (Measurement Uncertainty) of a Tensile Tester (e.g. Zwick Roell) Measurement Uncertainty (MU) 4
K Nadcap (AC7107/7 C, paragraph 6.1.b) NCR - Machining Tensile Specimens AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
J Minor NC - No MSA study on Tensile Tester IATF 16949 - Automotive Quality Systems Standard 4
S Interpreting Level of Confidence - Round Robin for Tensile Testing - Help needed Statistical Analysis Tools, Techniques and SPC 4
G Tensile Strength Distribution - Why a Weibull distribution is used? Reliability Analysis - Predictions, Testing and Standards 6
B SAE AS81914 - Convoluted Tubing Tensile Stress Various Other Specifications, Standards, and related Requirements 5
M Error in ASTM D3039 - 13.3.1 - Tensile Chord Modulus of Elasticity Various Other Specifications, Standards, and related Requirements 3
S Wire Pull Tensile Testing - Splice with multiple wires Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
7 SPC Monitoring for Pouches Manufactured Last Year - Tensile Strength Statistical Analysis Tools, Techniques and SPC 8
C MSA for Hardness Machine and Tensile/Compressive Machine Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
R Gage R&R on a Tensile Tester Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
S Recalibration of a Tensile Tester after Moving Calibration Frequency (Interval) 7
Q Stability & Variability Studies - Tensile Testing Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 8
M When to use Linearity and Bias - appropriate for paper tensile strength? Quality Tools, Improvement and Analysis 6
I Laboratory for Checking Tensile Strength using UTM (Universal Tensile Machine) General Measurement Device and Calibration Topics 13
I Does Anyone know how to check Universal Tensile Machine (UTM) ? Reliability Analysis - Predictions, Testing and Standards 5
D Validation of computer controlled tensile testers General Measurement Device and Calibration Topics 0
S Tensile made critical characteristic, but Cpk? High rate of rejection in a part Capability, Accuracy and Stability - Processes, Machines, etc. 9
W MSA for Destructive Testing - Tensile tester - Welding Processes Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
L What SPC method that I've must to control characteristic tensile strength? Statistical Analysis Tools, Techniques and SPC 1
S Help request - ISO 1926:1979 - Cellular plastics - Determining tensile properties Software Quality Assurance 1
S Using Certified Results from your Supplier - Chemistry report and Tensile results Supplier Quality Assurance and other Supplier Issues 12
J Metallurgical or tensile testing for new PPAP's or tooling re-cuts Customer and Company Specific Requirements 2

Similar threads

Top Bottom