Tensile Testing Transfer from one site to another site

QE

Quite Involved in Discussions
#1
Hello coves,

I am trying to transfer a tensile testing from one site to another site.

Test Process Site A: Take a sample of AQL 1%, inspection level S3, and test a 25mm Gage length of a section of the product. This process has been in place for a while and has lots of data gathered.

Test process at site B is not existing at all.

My intent is to implement it, while putting minimum effort and gather the same level of confidence in the data.

Please advise how can I convert an AQL 1%, level S3 at the receiving inspection at site A and bring it in to the process at site B while reducing the number of test samples to be tested and maintaining the same level of confidence and reliability in my decision of Pass Fail.

Thank you
QE.
 
Elsmar Forum Sponsor

QE

Quite Involved in Discussions
#2
Can any one please advise on this. I think if some one can explain the relation ship between the acceptance sampling plans and the sampling plan for process control.
 
Thread starter Similar threads Forum Replies Date
M Testing Tensile Strength of Materials AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 6
A Tensile Strength Testing of Rubber Underwear Manufacturing and Related Processes 2
D Manual Tensile Testing Pull Rate Speed Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
S Interpreting Level of Confidence - Round Robin for Tensile Testing - Help needed Statistical Analysis Tools, Techniques and SPC 4
S Wire Pull Tensile Testing - Splice with multiple wires Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
Q Stability & Variability Studies - Tensile Testing Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 8
W MSA for Destructive Testing - Tensile tester - Welding Processes Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 4
J Metallurgical or tensile testing for new PPAP's or tooling re-cuts Customer and Company Specific Requirements 2
K Tensile Standards used to Verify a Tensile Testing Machine General Measurement Device and Calibration Topics 3
P Test Method Validation for Tensile Strength Tester Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 0
D Raw Material chemical/Tensile Requirements Specifications (QQ-A-250/4, etc) AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 3
M ASTM F 75-12 - Tensile properties Product castings ( 7.1 ) vs Casting alloys ( 7.2) Other ISO and International Standards and European Regulations 1
K How do you select the right grips for your tensile tests? Imported Legacy Blogs 0
R Tensile Test Strain Rate - Impact on the Test Results Manufacturing and Related Processes 3
E IEC 60601-1 Tensile Load Safety Factor IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
alonFAI Gauge R&R for a Peel Tester (tensile tester) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 11
T Destructive Tensile Test Sampling Gage R&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 9
R MU (Measurement Uncertainty) of a Tensile Tester (e.g. Zwick Roell) Measurement Uncertainty (MU) 4
K Nadcap (AC7107/7 C, paragraph 6.1.b) NCR - Machining Tensile Specimens AS9100, IAQG 9100, Nadcap and related Aerospace Standards and Requirements 3
S Marking of Tensile Test Specimen Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
J Minor NC - No MSA study on Tensile Tester IATF 16949 - Automotive Quality Systems Standard 4
7 Data Analysis of Tensile Strength Test - Graphical Presentation of Results Statistical Analysis Tools, Techniques and SPC 2
G Tensile Strength Distribution - Why a Weibull distribution is used? Reliability Analysis - Predictions, Testing and Standards 6
Z ISO 3108 Wire Rope Tensile Test Methods General Measurement Device and Calibration Topics 3
B SAE AS81914 - Convoluted Tubing Tensile Stress Various Other Specifications, Standards, and related Requirements 5
optomist1 Tensile Test Crimped Electrical Terminal Acceptance Criteria Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
M Error in ASTM D3039 - 13.3.1 - Tensile Chord Modulus of Elasticity Various Other Specifications, Standards, and related Requirements 3
7 SPC Monitoring for Pouches Manufactured Last Year - Tensile Strength Statistical Analysis Tools, Techniques and SPC 8
C MSA for Hardness Machine and Tensile/Compressive Machine Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
R Gage R&R on a Tensile Tester Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
S Recalibration of a Tensile Tester after Moving Calibration Frequency (Interval) 7
S Needs clarification on tensile test on SS class F 431 material as per ASTM A 473 Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
M When to use Linearity and Bias - appropriate for paper tensile strength? Quality Tools, Improvement and Analysis 6
I Laboratory for Checking Tensile Strength using UTM (Universal Tensile Machine) General Measurement Device and Calibration Topics 13
I Does Anyone know how to check Universal Tensile Machine (UTM) ? Reliability Analysis - Predictions, Testing and Standards 5
D Validation of computer controlled tensile testers General Measurement Device and Calibration Topics 0
H Destructive Tensile Pull Test Gage R&R Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
Q Ford's for material test methods for tensile strength, compression deflection, etc. Customer and Company Specific Requirements 4
S Tensile made critical characteristic, but Cpk? High rate of rejection in a part Capability, Accuracy and Stability - Processes, Machines, etc. 9
M What distribution should I expect a tensile strength test to fit? Statistical Analysis Tools, Techniques and SPC 10
M MSA Study for tensile tester - Its difficult to do an MSA study on a destructive test Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 5
L What SPC method that I've must to control characteristic tensile strength? Statistical Analysis Tools, Techniques and SPC 1
T Tensile / Pull test standards / Specimens - 14 mil vinyl interior products Quality Tools, Improvement and Analysis 6
S Help request - ISO 1926:1979 - Cellular plastics - Determining tensile properties Software Quality Assurance 1
S Using Certified Results from your Supplier - Chemistry report and Tensile results Supplier Quality Assurance and other Supplier Issues 12
D Gage R&R - Destructive Test - Tensile Tester Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 19
O MSA for Destructive Tests - Tensile test as an example Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
B Gage R&R Destructive Tests - Tensile tester to check for paper strength Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 3
T MSA on tensile strength equipment Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 7
K Biocompatibility Testing - Multile products of different sizes and shapes US Food and Drug Administration (FDA) 2
Similar threads


















































Top Bottom