SBS - The best value in QMS software

Terminal Lugs sizes - Difference between 225/24 vs. 275/24 lugs

Elsmar Forum Sponsor

Ninja

Looking for Reality
Staff member
Super Moderator
#2
See here for ratings...dimensioning is also a simple google search away...

You can search for those parts HERE as well...and see that the dimensions are different (look at the product descriptions at the top)...

Is this what you're after?
 
Thread starter Similar threads Forum Replies Date
S Potential Equalization Conductor vs Functional Earth Terminal IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
A Electric terminal crimping machines - Is SPC appropriate for this process? Manufacturing and Related Processes 4
L Terminal Block use in compliance to IEC 60601-1 IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
T Preventing Wrong Terminal Crimped on a Wire Harness Manufacturing and Related Processes 7
optomist1 Tensile Test Crimped Electrical Terminal Acceptance Criteria Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
H What does the abbreviation for ?POAG? terminal/stud stand for? Manufacturing and Related Processes 3
M IPC-A-610 vs. Our Specification - Not Staking Wire through a Bifurcated Terminal Various Other Specifications, Standards, and related Requirements 4
E Marking the material category for Component Terminal Finish (Jedec J-std-609)? Manufacturing and Related Processes 1
A Radio & Telecommunications Terminal Equipment Directive 1999/5/EC CE Marking (Conformité Européene) / CB Scheme 5
J IVD sampling sizes for buyer Reliability Analysis - Predictions, Testing and Standards 0
S Determining sample sizes for PQ Qualification and Validation (including 21 CFR Part 11) 4
K Biocompatibility Testing - Multile products of different sizes and shapes US Food and Drug Administration (FDA) 2
N Design Verification & Process Validation - Statistical sample sizes Design and Development of Products and Processes 2
Q ISO 3310 Clarification Help - Aperture sizes for sieves used for particle sorting Other ISO and International Standards and European Regulations 2
F Holes position inspection - Calculation of centre distance and plug sizes of a gauge Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
M ASTM A6 Material Standard - Section Nominal Sizes Manufacturing and Related Processes 1
C PMCF (Post Market Clinical Followup) Enrollment Sizes (Spinal Implants) EU Medical Device Regulations 5
M How to Mathemetically Derive the AQL Tables given Lot Sizes AQL - Acceptable Quality Level 5
H Control limits for varying subgroup sizes Statistical Analysis Tools, Techniques and SPC 1
Marc Determination of Sample Sizes when Auditing General Auditing Discussions 13
M Validation Sample Sizes and Selection: An Example Inspection, Prints (Drawings), Testing, Sampling and Related Topics 10
M How to make Plug Gauge No & NoGo Sizes Calibration and Metrology Software and Hardware 3
K Verification Sampling vs. AQL - Sampl Sizes Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
D Sample Sizes for 'Bulk' Fluids/ Materials (Polymer Synthesis Process) Design and Development of Products and Processes 1
M Unequal Sample Sizes - F-Test & T-Test Statistical Analysis Tools, Techniques and SPC 5
H Determining the Correct Sample Size when AQL points to two Sample Sizes AQL - Acceptable Quality Level 7
A Rationalizing the use Lot Sizes greater than the PQ runs used in Process Validations 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 3
R Determining Sample Sizes for Testing (Chemistry or Microbiology) Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
J Is Training needed when New Sizes are added to an Existing Product? ISO 13485:2016 - Medical Device Quality Management Systems 4
J Utilizing FTY Data - Normalizing Data for Varying Lot Sizes Quality Tools, Improvement and Analysis 1
T AQL question on Changing Lot Sizes AQL - Acceptable Quality Level 1
C Sample Size: Why are Sample Sizes not Linear according to the Lot Size? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
E AQL with Multiple Attributes - Sample Sizes AQL - Acceptable Quality Level 8
J Control Charts with different Sample Sizes Reliability Analysis - Predictions, Testing and Standards 2
G Stabilized (Normalized) S Chart for Unequal Sample Sizes Statistical Analysis Tools, Techniques and SPC 5
A Process Audits for 1200 different kinds of Tube Sizes Process Audits and Layered Process Audits 9
S Special Inspection Levels - Batch sizes are large (typically 100k - 150k) AQL - Acceptable Quality Level 10
A AQL Sample Sizes - Explain how Sample Sizes in an AQL table are calculated AQL - Acceptable Quality Level 4
B Sample Sizes for In-Vivo Design Validation Testing Other Medical Device and Orthopedic Related Topics 1
E Which sampling table (ISO-2859) must I use on different lot sizes Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
J BS EN131-1:2007 Standards (Ladders, Specification for terms, types, functional sizes) Other ISO and International Standards and European Regulations 1
somashekar Information sharing: Week 21, 2010 (PAPER SIZES) The Reading Room 1
S Single-Stage Cluster Sample of Unequal Sizes & Confidence Limits Statistical Analysis Tools, Techniques and SPC 1
R Chain Sampling Plan explanation and help - Reducing sample sizes (compared to Z1.4) Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
D Symbol Colours and Sizes on Medical Devices Other Medical Device Related Standards 14
U P Charts - Subgroup Sizes? Process Control Indicator Statistical Analysis Tools, Techniques and SPC 3
Z Ring Gage Calibration Sizes Shrunk with New External Vendor (supplier) General Measurement Device and Calibration Topics 16
T Sample Sizes for Design Verification of Medical Devices Inspection, Prints (Drawings), Testing, Sampling and Related Topics 16
B Kanban Calculation - Correct Kanban Sizes Lean in Manufacturing and Service Industries 4
T Assumptions with Small Sample Sizes Capability, Accuracy and Stability - Processes, Machines, etc. 11

Similar threads

Top Bottom