Test plan of Design Validation Plan and Report (DVP & R)

N

Nicco

#1
I'm searching the test plan of DVP & R (Design verification plan and report), which's can evaluated the automotive parts even sub-system both of design and pre-production stage before SOP.
 
Elsmar Forum Sponsor

Miner

Forum Moderator
Staff member
Admin
#3

Attachments

N

Nicco

#5
3/20 13:54 (Taiwan time)

I'm trying to write down the test plan as follow : (see as attached file)

Specification or Test Description Acceptance
Clause Reference Criteria
============== ============= ==============

Performance/Functional 12+/-0.2V
Evaluations 25+/-5 degree C

Low Temperature -40+/-3 degreee C
Exposure Duation : 96 Hrs

High Temperature 85+/-3 degreee C
Exposure Duation : 720 Hrs

...etc

Have anyone can informs me how many criteria or item should be including ?
 

Attachments

E

ezorangee

#6
DVP&R Information and/or Instructions

I have reviewed and have downloaded the templates for the DVP&R. I would like to complete, but I am not sure of some of the terms and and the proper method of filling out this report. Can anyone provide me with the information to correctly record information in this report. Thank you!
 
E

ezorangee

#8
DVP&R Information and/or Instructions

In general, my question is more along the lines of the definitions of the requirements. Design requirements as listed on the customer drawing are understood as being part of the testing to be verified. Are there any other requirements that I should be considering? We are not design responsible, so a Design FMEA was not completed by our group.

As an aside to this, are the requirements that are listed on the DVP&R then become part of the Control Plan?
 
Thread starter Similar threads Forum Replies Date
T Is a Design and Development Plan required for Test Items? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
A Definition of customer in ITP (Inspection & Test Plan) Contract Review Process 3
M Informational USFDA – Digital Health Update: The FDA Announces an Opportunity for Test Case Volunteers for the Test Plan for the Software Precertification Program Medical Device and FDA Regulations and Standards News 0
Mr Skeleton PV (Production Validation) test plan responsibility APQP and PPAP 21
O IEC 60601-1-2:2014 Test plan guidance CE Marking (Conformité Européene) / CB Scheme 2
O Suggestions for templates for formulating test plan for IEC 60601-1-2 4th ed CE Marking (Conformité Européene) / CB Scheme 0
M How to Plan and Test the Reliability of Medical Devices Reliability Analysis - Predictions, Testing and Standards 1
A Inspection Test Plan Contract Review Process 1
A Demonstration Test Plan for Reliability of Big Equipment Reliability Analysis - Predictions, Testing and Standards 5
R How to test a BCP (Business Continuity Plan) Business Continuity & Resiliency Planning (BCRP) 6
L Difference between a Quality Plan and Inspection & Test Plan (ITP) ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
Marc Definition ITP - Inspection and Test Plan Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 3
L Electrical Cable Harness Quality Control - Sampling Plan for Pull Test Manufacturing and Related Processes 4
K What is an Inspection and Test Plan? Construction Project Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
E Sampling Plan for In-Vitro Pregnancy Test Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
Q Inspection and Test Plan Contents ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
P Best practice on documents turning into records, test and validation plan ISO 13485:2016 - Medical Device Quality Management Systems 9
B Software Beta Testing - Sample test plan or procedure wanted Other Medical Device and Orthopedic Related Topics 5
T Electronic Assembly Test Plan Template Document Control Systems, Procedures, Forms and Templates 2
J Minimum Inspection Test Plan for PCBAs including Key Characteristics Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
U What is the purpose of a Software Test Plan? Software Quality Assurance 7
M Ambient vs. controlled test laboratory environment Test Method Evaluation Plan Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 1
A Sampling plan for destructive test Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
T Can I consider Reliability Test Plan part of the DVP&R, or the other way round Reliability Analysis - Predictions, Testing and Standards 3
I Sampling plan vs. test samples - All samples taken have to be tested to all specs? Inspection, Prints (Drawings), Testing, Sampling and Related Topics 3
E Test report to certify compliance with IEC 62304 IEC 62304 - Medical Device Software Life Cycle Processes 2
E Tensile test machine, tinius olsen 602 Manufacturing and Related Processes 1
M Test failure Root cause not found Customer Complaints 10
Moumen H Variations between ASTM A29 Standard for steel bars and Mill test certificates specs Manufacturing and Related Processes 1
D Tip test 10° -> 5° IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
M Sponsor name presented in the test report EU Medical Device Regulations 4
M Packing Validation & Accelerated Aging Test ISO 13485:2016 - Medical Device Quality Management Systems 2
S OEM full range calibrations vs Validation special test points Medical Device and FDA Regulations and Standards News 0
C IEC 60601 - 8.8.3 Dielectric Strength test. 4kv being applied to the ground conductor?! IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
S Shelf Life Test for IFU and Implant Card Other Medical Device Related Standards 1
S Mechanical Test Under FDA Freedom of Information Act Medical Device and FDA Regulations and Standards News 5
S Critical characteristic on manufacturing operations test procedure Inspection, Prints (Drawings), Testing, Sampling and Related Topics 0
R IEC 60601-1 Clause 15.3.2, Push test IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
S Knee Implant (Femoral -Cobalt chrome)-Sub chronic toxicity test (ISO 10993-11)choice of root Medical Device and FDA Regulations and Standards News 2
A Defining a lower ESD test level in IEC 60601 safety test IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
N Is there a need for clinical test of Class IIa products (for MDR)? EU Medical Device Regulations 2
A Is calibration of test weight required General Measurement Device and Calibration Topics 4
S Non parametric test for semi-quantitative data. Statistical Analysis Tools, Techniques and SPC 5
Ed Panek Disaster Recovery Test IT (Information Technology) Service Management 3
A How much does a complete biocompatibility test package cost? Other ISO and International Standards and European Regulations 1
M Is it normal / sufficient to have only the IEC 60601-1-2 test report without indicating IEC 60601-1? IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
Z Is Op Amp Common-Mode Rejection Ratio (CMRR) test applicable to battery operated devices? Other Medical Device Related Standards 0
E When to perform accelerated aging studies and transport test(OQ or PQ) Qualification and Validation (including 21 CFR Part 11) 4
U Does *anyone* know a lab that will test to EN 455-4 Medical Gloves shelf life determination? EU Medical Device Regulations 1
A Test requirements for marketing in US when RATED values are not of US IEC 60601 - Medical Electrical Equipment Safety Standards Series 5

Similar threads

Top Bottom