Testing a Low Current (Battery) DC Medical Device

markl368

Involved In Discussions
#1
We're looking into testing a medical device that is operated using a battery (DC) and running at a very low current level; <100 uA. Are there any standards that outline safety and risk considerations and tests to confirm this for such devices??
 
Elsmar Forum Sponsor
#4
IEC 60601-1 (plus collaterals and particulars) applies to all electrical medical devices. They may be mains powered, battery powered or both.

There is no distinction made for a low supply current but some parts (thermal risks, fire) would be less relevant due to the limited total energy available from your cell.
 

Marcelo

Inactive Registered Visitor
#5
IEC 60601-1 (plus collaterals and particulars) applies to all electrical medical devices.
Just a quick comment to avoid confusion. IEC 60601 applies to all "medical electrical equipment"as defined by the standard. There's several electrical medical devices which are not medical electrical equipment.

Anyway, even if the device from the OP is not a medical electrical equipment, he could use the requirements of IEC 60601 to show compliance with electrical safety requirements (even more so if there's no standard related to his device).
 
Thread starter Similar threads Forum Replies Date
C Hardness Testing - Low Cpk's using Minitab Misc. Quality Assurance and Business Systems Related Topics 10
M IEC 60601-1 Testing required for low-voltage devices? IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
P Hot water cylinder parts - Testing per the Low Voltage Directive CE Marking (Conformité Européene) / CB Scheme 1
J Testing Potential New Hires for a Low Level Part Inspection Position Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
R GB9706.1:2020 - in-country testing China Medical Device Regulations 0
A Bench Testing US Food and Drug Administration (FDA) 2
R Validation of Software used in Verification Testing ISO 13485:2016 - Medical Device Quality Management Systems 2
M Do i need to have equipment validation if 100% testing is completed? Qualification and Validation (including 21 CFR Part 11) 4
E Biocompatibility testing of our applied part seems redundant Other Medical Device Related Standards 2
A Recommended testing methods for weather stripping Manufacturing and Related Processes 6
T Shrinkage Testing for EPDM Material Various Other Specifications, Standards, and related Requirements 5
J Managing design verification regression testing of design changes Design and Development of Products and Processes 1
D Conductivity Water Samples testing temperature Qualification and Validation (including 21 CFR Part 11) 2
G Pricing Structure for Physical Mechanical Testing of Labs Manufacturing and Related Processes 1
S Skipped/Reduced testing in Pharma for Raw materials and Intermediates Manufacturing and Related Processes 0
S Pharmaceutical Shelf Life Testing Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 0
D How to testing of Pressure relief valve as per API 6D ? Oil and Gas Industry Standards and Regulations 1
J Impact Testing--Is conversion between Izod and Sharpy Possible? General Measurement Device and Calibration Topics 3
O Should a Covid vaccine and testing policy be included as part of ISO9001 or AS9100 risk management? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
V How to select the tests for proficiency testing Measurement Uncertainty (MU) 0
B Customer Preference Testing Customer and Company Specific Requirements 2
N Pre-Clinical Performance Testing Design and Development of Products and Processes 3
I Software (SaMD) mobile application verification testing: objective evidence Medical Information Technology, Medical Software and Health Informatics 2
I How to find required testing for a specific device? Other US Medical Device Regulations 3
J CQI-9v4 Alternative TUS Testing Methods Various Other Specifications, Standards, and related Requirements 0
M ASTM F1717 Static and Dynamic Testing 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2
T Mold Limits for Microbiology Testing Other Medical Device Related Standards 3
S Orthopedic implant sterility testing Medical Device and FDA Regulations and Standards News 1
H Independence between the development and testing IEC 62304 - Medical Device Software Life Cycle Processes 6
M Issues with leakage current testing for a CLASS II device since no PE and FE is present IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
M Testing criteria - where to place Design and Development of Products and Processes 2
E 60601-1 - Tilt testing - Tensile safety factor IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
V Setup for testing against ISO14708 clause 16 (protection of the patient from herms caused by heat) Other Medical Device Related Standards 0
gramps What do you think about automated QA testing For software app industry? Misc. Quality Assurance and Business Systems Related Topics 5
B In house NIOSH pre Testing accepted by NIOSH? US Food and Drug Administration (FDA) 1
M Bacteriostasis/Fungistasis Testing Other Medical Device and Orthopedic Related Topics 6
P Sample Size for Distribution Simulation Testing Inspection, Prints (Drawings), Testing, Sampling and Related Topics 11
N EN 813, EN 12277, EN 1497 - Testing some harness prototypes to an EN standard Various Other Specifications, Standards, and related Requirements 0
S What should i choose for "testing procedure" characteristics? (N95) General Information Resources 0
D Essential performance and EMC immunity testing IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
J Biocompatbility testing on Class 1 device requirements Other US Medical Device Regulations 12
Q Summative Usability Evaluation Testing: prior or during Clinical Investigation? Human Factors and Ergonomics in Engineering 10
B NIOSH Approval for Surgical N95 Respirators - Required testing US Food and Drug Administration (FDA) 2
M ECG lead leakage currents - How to specify ECG leads during electrical safety testing IEC 60601 - Medical Electrical Equipment Safety Standards Series 5
C Stress / Challenge Conditions for Design Verification Testing to Reduce Sample Size 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 11
D CFR Title 14: Aeronautics and Space PART 120—DRUG AND ALCOHOL TESTING PROGRAM Federal Aviation Administration (FAA) Standards and Requirements 3
lanley liao Purchase Acceptance Criteria - Tensile testing Oil and Gas Industry Standards and Regulations 2
M Device mounted at IV pole - what about mechanical stability testing? IEC 60601 - Medical Electrical Equipment Safety Standards Series 2
A Outsourcing IEC 60601-1 Ed 3.2 Testing IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
J Cochlear Implant Testing 21 CFR Part 820 - US FDA Quality System Regulations (QSR) 2

Similar threads

Top Bottom