Testing for proving food safety on USP class vi material

#1
Hello everyone !

For testing purposes, I am planning on using a 3d printed part inside a breast pump. The part will be passing milk from one side of the pump to another and the milk is not in contact with the part for more than a minute. It is made in this material that is tested for USP class vi : BioMed White resin from Formlabs.

As the usp class vi testing is one of the most astringent I would expect that I will have no issues to comply with the food safe standards in Europe. I am wondering what needs to be done to prove that the material is food safe for a small batch of parts (50 parts) that will only be used for testing. For exemple, I wonder if I have to apply for allowing the use of a new food safe material at the EFSA.

Any feedback is appreciated !
 
Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
E Usability for Near Patient Testing Test Kit Human Factors and Ergonomics in Engineering 2
J Single Fault Testing for Secondary Circuits (60601-1 section 13.1) IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
P Medical device testing lab/service standard Other Medical Device Related Standards 1
T Cytoxtoxicity Testing Dilution Other Medical Device Related Standards 1
M Altitude testing IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
H IEC 62368-1 Scope of Testing CE Marking (Conformité Européene) / CB Scheme 3
H EMC & Safety Testing of the product with the same Sr. No. for EC Declaration CE Marking (Conformité Européene) / CB Scheme 3
A Non-medical device testing in the medical system IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
H Is testing according to IEC 60601-1 & IEC 60601-1-2 mandatory for a device being registered under MDR? IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
W CQI-9 Testing Fluids Manufacturing and Related Processes 0
XRAY_3121 Class II heating pad - does the power supply have to have IEC 60601-1 testing?? US Medical Device Regulations 5
J Risk Analysis for Proficiency Testing Reliability Analysis - Predictions, Testing and Standards 1
Rene Minassian Control of (TMME) Testing and Measurement Equipment Oil and Gas Industry Standards and Regulations 2
M Is complete testing required as per ISO 10993 for materials used in orthopedic implants or is literature review route possible Other Medical Device Related Standards 3
B A testing lab within an organization ISO 17025 related Discussions 10
B Package integrity Testing failure ISO 13485:2016 - Medical Device Quality Management Systems 7
R Basic Lab Practices - related to ISO 17025 testing labs ISO 17025 related Discussions 1
N Microbial testing on food packaging materials Food Safety - ISO 22000, HACCP (21 CFR 120) 3
A Stability Testing of a device with sterile fluid pathway claim Other Medical Device and Orthopedic Related Topics 1
M Cosmetic Shelf Life Testing Misc. Quality Assurance and Business Systems Related Topics 10
S Safety testing IEC 60601 series Medical Device and FDA Regulations and Standards News 2
M EE's - Laptops/Printer Change and Emissions Testing IEC 60601 - Medical Electrical Equipment Safety Standards Series 6
keya1tos EU to UK plug adapter correct testing standard CE Marking (Conformité Européene) / CB Scheme 9
D IEC 60601-1-2: Is EMC immunity testing required for a device without essential performance? IEC 60601 - Medical Electrical Equipment Safety Standards Series 25
M Oral irritation testing Medical Information Technology, Medical Software and Health Informatics 0
A Fire Testing - EN 50339 Not 20 minutes ISO 17025 related Discussions 0
M Biological testing at the end of the real time of MD Other Medical Device Related Standards 3
M In Vitro irritation testing according to ISO 10993-23 ISO 13485:2016 - Medical Device Quality Management Systems 2
R SaMD Performance Testing US Medical Device Regulations 5
J 'Failure rate leading to false-negatives and repeat testing' - MDCG and Common Tech Specs Other Medical Device Regulations World-Wide 0
M Extractables testing replicates - Chemical Characterization ISO 10993-18 EU Medical Device Regulations 2
C Strategies to Mitigate Fails in DV Testing Design and Development of Products and Processes 3
E 17025 Accredited Microbiological Testing Laboratory ISO 17025 related Discussions 3
X Looking for 17025 auditor to perform internal audit on IT software testing laboratory ISO 17025 related Discussions 3
J Design Verification Testing and Statistics Reliability Analysis - Predictions, Testing and Standards 3
W External PSU Providing a MOOP -- Will This Necessitate Conducted Emissions Testing? IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
G How to Record Informal Testing (Not Verification/Validation) Other Medical Device and Orthopedic Related Topics 15
J Medical Device Component Change - Testing, Sampling Criteria ISO 14971 - Medical Device Risk Management 3
R Microbiological test (USP61, USP62, USP71, ISO 11137.1, ISO11137.2) --- Testing flow chart Other Medical Device Related Standards 0
R GB9706.1:2020 - in-country testing China Medical Device Regulations 1
A Bench Testing US Food and Drug Administration (FDA) 2
R Validation of Software used in Verification Testing ISO 13485:2016 - Medical Device Quality Management Systems 2
M Do i need to have equipment validation if 100% testing is completed? Qualification and Validation (including 21 CFR Part 11) 6
E Biocompatibility testing of our applied part seems redundant Other Medical Device Related Standards 2
A Recommended testing methods for weather stripping Manufacturing and Related Processes 6
T Shrinkage Testing for EPDM Material Various Other Specifications, Standards, and related Requirements 5
J Managing design verification regression testing of design changes Design and Development of Products and Processes 1
D Conductivity Water Samples testing temperature Qualification and Validation (including 21 CFR Part 11) 2
G Pricing Structure for Physical Mechanical Testing of Labs Manufacturing and Related Processes 1
S Skipped/Reduced testing in Pharma for Raw materials and Intermediates Manufacturing and Related Processes 0

Similar threads

Top Bottom