Testing Potential New Hires for a Low Level Part Inspection Position

J

jkittle

#1
Anyone have nay ideas for a simple test for potential new hire for a low level part inspection position. Only tools realy used will be hand held mics and calipers, go/no-go gages.
 
Elsmar Forum Sponsor

SteelMaiden

Super Moderator
Trusted Information Resource
#2
Re: Testing Potential New Hires

samples of good and bad "parts" to be measured and sorted within a certain amount of time?
 

ScottK

Not out of the crisis
Leader
Super Moderator
#5
Re: Testing Potential New Hires

Whatever you do make it standardized to avoid any potential crys of favoritism or predjudice.

We did this recently when we hired some QC inspectors.
We out a few common parts out with a caliper, micrometer, depth mic, and some go/no-go gages. We had the prints and inspection plan for each part with a dims highlited on each. Gave a brief instruction on how to read the inspection plan. Then asked them to check the dimensions highlighted with tool indicated on the inspection plan.

Worked pretty well.
 

Stijloor

Leader
Super Moderator
#6
Re: Testing Potential New Hires

Anyone have nay ideas for a simple test for potential new hire for a low level part inspection position. Only tools realy used will be hand held mics and calipers, go/no-go gages.
Hello Jerry,

The best "test" is to have your candidates actually measure your company's parts. Make sure that the tests actually represent the kind of work that the candidate-inspectors will be doing and that they are administered and "graded" in a similar fashion. As you may know, testing in North Carolina (and perhaps in other States) can have legal implications.

Stijloor.
 
Thread starter Similar threads Forum Replies Date
P Medical device testing lab/service standard Other Medical Device Related Standards 1
T Cytoxtoxicity Testing Dilution Other Medical Device Related Standards 1
M Altitude testing IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
H IEC 62368-1 Scope of Testing CE Marking (Conformité Européene) / CB Scheme 3
H EMC & Safety Testing of the product with the same Sr. No. for EC Declaration CE Marking (Conformité Européene) / CB Scheme 3
A Non-medical device testing in the medical system IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
H Is testing according to IEC 60601-1 & IEC 60601-1-2 mandatory for a device being registered under MDR? IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
W CQI-9 Testing Fluids Manufacturing and Related Processes 0
XRAY_3121 Class II heating pad - does the power supply have to have IEC 60601-1 testing?? US Medical Device Regulations 5
T Testing for proving food safety on USP class vi material RoHS, REACH, ELV, IMDS and Restricted Substances 0
J Risk Analysis for Proficiency Testing Reliability Analysis - Predictions, Testing and Standards 1
Rene Minassian Control of (TMME) Testing and Measurement Equipment Oil and Gas Industry Standards and Regulations 2
M Is complete testing required as per ISO 10993 for materials used in orthopedic implants or is literature review route possible Other Medical Device Related Standards 3
B A testing lab within an organization ISO 17025 related Discussions 5
B Package integrity Testing failure ISO 13485:2016 - Medical Device Quality Management Systems 7
R Basic Lab Practices - related to ISO 17025 testing labs ISO 17025 related Discussions 1
N Microbial testing on food packaging materials Food Safety - ISO 22000, HACCP (21 CFR 120) 3
A Stability Testing of a device with sterile fluid pathway claim Other Medical Device and Orthopedic Related Topics 1
M Cosmetic Shelf Life Testing Misc. Quality Assurance and Business Systems Related Topics 10
S Safety testing IEC 60601 series Medical Device and FDA Regulations and Standards News 2
M EE's - Laptops/Printer Change and Emissions Testing IEC 60601 - Medical Electrical Equipment Safety Standards Series 6
keya1tos EU to UK plug adapter correct testing standard CE Marking (Conformité Européene) / CB Scheme 9
D IEC 60601-1-2: Is EMC immunity testing required for a device without essential performance? IEC 60601 - Medical Electrical Equipment Safety Standards Series 25
M Oral irritation testing Medical Information Technology, Medical Software and Health Informatics 0
A Fire Testing - EN 50339 Not 20 minutes ISO 17025 related Discussions 0
M Biological testing at the end of the real time of MD Other Medical Device Related Standards 3
M In Vitro irritation testing according to ISO 10993-23 ISO 13485:2016 - Medical Device Quality Management Systems 2
R SaMD Performance Testing US Medical Device Regulations 5
J 'Failure rate leading to false-negatives and repeat testing' - MDCG and Common Tech Specs Other Medical Device Regulations World-Wide 0
M Extractables testing replicates - Chemical Characterization ISO 10993-18 EU Medical Device Regulations 2
C Strategies to Mitigate Fails in DV Testing Design and Development of Products and Processes 3
E 17025 Accredited Microbiological Testing Laboratory ISO 17025 related Discussions 3
X Looking for 17025 auditor to perform internal audit on IT software testing laboratory ISO 17025 related Discussions 3
J Design Verification Testing and Statistics Reliability Analysis - Predictions, Testing and Standards 3
W External PSU Providing a MOOP -- Will This Necessitate Conducted Emissions Testing? IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
G How to Record Informal Testing (Not Verification/Validation) Other Medical Device and Orthopedic Related Topics 15
J Medical Device Component Change - Testing, Sampling Criteria ISO 14971 - Medical Device Risk Management 3
R Microbiological test (USP61, USP62, USP71, ISO 11137.1, ISO11137.2) --- Testing flow chart Other Medical Device Related Standards 0
R GB9706.1:2020 - in-country testing China Medical Device Regulations 1
A Bench Testing US Food and Drug Administration (FDA) 2
R Validation of Software used in Verification Testing ISO 13485:2016 - Medical Device Quality Management Systems 2
M Do i need to have equipment validation if 100% testing is completed? Qualification and Validation (including 21 CFR Part 11) 6
E Biocompatibility testing of our applied part seems redundant Other Medical Device Related Standards 2
A Recommended testing methods for weather stripping Manufacturing and Related Processes 6
T Shrinkage Testing for EPDM Material Various Other Specifications, Standards, and related Requirements 5
J Managing design verification regression testing of design changes Design and Development of Products and Processes 1
D Conductivity Water Samples testing temperature Qualification and Validation (including 21 CFR Part 11) 2
G Pricing Structure for Physical Mechanical Testing of Labs Manufacturing and Related Processes 1
S Skipped/Reduced testing in Pharma for Raw materials and Intermediates Manufacturing and Related Processes 0
S Pharmaceutical Shelf Life Testing Pharmaceuticals (21 CFR Part 210, 21 CFR Part 211 and related Regulations) 0

Similar threads

Top Bottom