SBS - The Best Value in QMS software

The note at the bottom of DFMEA occurrence tables in AIAG VDA FMEA

#1
The note at the bottom of occurrence tables (table C1.2 and C1.3.1) in AIAG VDA FMEA was as follows: "O = 10, 9, 8, 7 can drop based on product validation activities". According to the Errata Sheet dd. June 2020, it is changed as follows: "Occurrence can drop based on product validation activities".

What does this mean? Can anyone elaborate "occurrence can drop based on product validation activities"?
 
Elsmar Forum Sponsor
Thread starter Similar threads Forum Replies Date
Crusader AS9100 7.5.2 NOTE Approval methods identified AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 8
T GDT Callout - How to call out a note that requires some clamp load Inspection, Prints (Drawings), Testing, Sampling and Related Topics 7
S Software Release Note - Class A stand alone software medical device IEC 62304 - Medical Device Software Life Cycle Processes 2
M Pharmaceuticals News UK – Further guidance note on the regulation of medicines, medical devices and clinical trials if there’s no Brexit deal Medical Device and FDA Regulations and Standards News 0
S Nonconformance to a Note in ISO13485 clause 6.2 Human Resources Effectiveness ISO 13485:2016 - Medical Device Quality Management Systems 13
D Controlled Documents & Note Making ISO 13485:2016 - Medical Device Quality Management Systems 4
S When should a note-to-file be used in a QMS vs Deviation Report ISO 13485:2016 - Medical Device Quality Management Systems 1
Y ISO 9001:2015 Cl. 4.1 Note 1 - External and Internal issues ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
B Process audit note sheet IATF 16949 - Automotive Quality Systems Standard 2
A Compliance Obligations - Implementing 6.1.1 and 6.1.3 NOTE - Determine risks and... ISO 14001:2015 Specific Discussions 1
T What is PESS? Cited in Edition 3.1 of IEC 60601, clause 14.1 note 2 IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
Q ISO 9001:2015 - Clarification in 6.1.2 Note 1 (Options to Address Risks) ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
Q Values - ISO 9001 2015 - Clause 4.1 Note 3 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
F TS 16949 Clause 7.2.1 - Note 2 - Recycling program - Clarification IATF 16949 - Automotive Quality Systems Standard 4
T VDA note 3 VDA Standards - Germany's Automotive Standards 4
L TS 16949 Clause 6.2.2.2 note 2 - Digitized Mathematically Based Data IATF 16949 - Automotive Quality Systems Standard 5
K Can anyone share an Note to File for justifying postponement of Internal Audits ? Quality Manager and Management Related Issues 5
T Review of OASIS Feedback - Note on Management Review AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
M What is the intent of the NOTE under 8.2.4 M/M of Product IATF 16949 - Automotive Quality Systems Standard 3
M 8.2.1 ?NOTE- Is Monitoring of Internal Customer Satisfaction a requirement? IATF 16949 - Automotive Quality Systems Standard 1
A Raytheon Q note WE on Contracts - Counterfeit Material Avoidance Procedure AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 8
V AAR (Appearance Approval Report) with general note for Grain APQP and PPAP 1
S 'No %Tolerance Is Calculated' Note (Minitab) Using Minitab Software 7
V Note Change to Print - Do I need dimensions results? APQP and PPAP 1
S A Quality Experience Worthy of note - Econo Lodge in Harrisburg, PA Travel - Hotels, Motels, Planes and Trains 2
K Pest Control - Log Book to take note of Baits, Cages and Insectrocutors Food Safety - ISO 22000, HACCP (21 CFR 120) 4
B Clarification on 7.6 Control of Monitoring and Measuring Devices Note AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
T What is the significance of a drawing note number appearing inside a box Inspection, Prints (Drawings), Testing, Sampling and Related Topics 5
J Blueprint Note: Rectangular Distribution is Permissible - Concentricity of Two Holes Capability, Accuracy and Stability - Processes, Machines, etc. 5
N Note interpretation - Ensure that the preservation of the product has been consider ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
L Explanation of the note attached to 7.1(a) in AS 9100 Rev.C AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
R Customer, Statutory and Regulatory Requirements - Intent of Clause 4.1, Note 3 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
D ISO 14004 standard End Note on Clause 4.3.1.5 ISO 14001:2015 Specific Discussions 6
smryan Analysis and Improvement - ISO 9001:2008 Clause 4.1 Note 1 question ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
J How to understand NOTE 2 in the ISO 9000 definition of defect? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
J Print asking for Straightness of 0.013 and it has a note "Any Radial Element" Inspection, Prints (Drawings), Testing, Sampling and Related Topics 8
G Manufacturing Aide - Putting a "Manufacturing Aide or note" on a customer print? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
G Hazardous Waste Consignment Note - Please Help Miscellaneous Environmental Standards and EMS Related Discussions 2
T From ECR (Engineering Change Request) to ECN (Engineering Change Note) - double work! Document Control Systems, Procedures, Forms and Templates 2
B Statutory vs. Regulatory requirements - ISO 9001:2008, clause 1.1 Note 2 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 9
Q Handling Calibration Postponement - just a note/deviation report/others? General Measurement Device and Calibration Topics 7
C Fully Electronic Quality Management System - Any Special Considerations to take Note? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 34
Douglas E. Purdy Purchased products - ISO9001 Interpretation & TS16949 Note 1 of 7.4.1 IATF 16949 - Automotive Quality Systems Standard 5
C What is reference standard and reference materials as per clause 5.4.5.2 note 2? General Measurement Device and Calibration Topics 1
A Do we need to the requirements listed under the heading NOTE General Measurement Device and Calibration Topics 4
S 3.4.5 Note 1 Procudures can be documented or not. Manufacturing and Related Processes 3
F GD&T Parallelism Interpretation - Print which has a note: //|0.5 | A. Quality Tools, Improvement and Analysis 30
M Production meetings - Any specific TS requirements which I should note? IATF 16949 - Automotive Quality Systems Standard 3
Hershal Accredited laboratories note: ISO/IEC 17011 - New Standard Requirements General Measurement Device and Calibration Topics 0
R Another "Show me the shall" - Improvement note on something trivial Registrars and Notified Bodies 24

Similar threads

Top Bottom