The Original "Introductions" Thread started in 2001 and split off October 2009

[EtobiLad - 2009]

Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

Welcome Mukesh, there are a lot who can help you on here on TS issues. So do not hesitate if you have questions, they'll be too eager to jump in and lend a helping hand. Try also the "search" menu for topics or discussion that have been posted. It help me before getting engaged in any discussion. and oh yeah.

 

[Qualidad Monique]

Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

1. Monica
2. QA Manager
3. Software development
4. Software company / Bucharest / Romania
5. I'm a beginer - 6 month
6. I don't know what to say - I'm just a normal girl
7. I don't know yet
8. I don't want to change anything now ... let's talk again in 6 month

 

[Srikantan]

Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

I have really gotten a lot out of this forum and all of you who participate. I was curious, though, who all of you are and what you do. How about letting us know a little bit about you and your background?
The Details as under:
1. Name: GK Srikantan
2. Job Title or explanation of what you do: Design and Developement, specific to mass production and automation
3. Industry you're in or have been in: Automobile , Bearings, Lightings specially Energy Saving CFLs
4. Company you work for and location: Starlite Lighting Ltd, Nashik-India
5. Length of time in quality function: over 35 years
6. Something personal that sets you apart: Risen from a mere Apprentice on the shop floor to Technical Director of Ltd Company, all on my own effort
7. Your pet peeve in quality: Provide Proper Design Tolerance and Manufacturing Tolerance to achieve realistic and expected quality levels
8. If you could change the world of quality, what would you do?
Work to Eliminate "UNCERTAINITIES"


------------------
See you down life's highway!

Eric

[This message has been edited by Greenraisin (edited 18 April 2001).]

The Details as under:
1. Name: GK Srikantan
2. Job Title or explanation of what you do: Design and Developement, specific to mass production and automation
3. Industry you're in or have been in: Automobile , Bearings, Lightings specially Energy Saving CFLs
4. Company you work for and location: Starlite Lighting Ltd, Nashik-India
5. Length of time in quality function: over 35 years
6. Something personal that sets you apart: Risen from a mere Apprentice on the shop floor to Technical Director of Ltd Company, all on my own effort
7. Your pet peeve in quality: Provide Proper Design Tolerance and Manufacturing Tolerance to achieve realistic and expected quality levels
8. If you could change the world of quality, what would you do?
Work to Eliminate "UNCERTAINITIES"

 

[mmoo37]

Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

Hi - my name is Mary. I work in quality sytems at an automotive supplier. I have not posted before, just read a lot. I am looking for some very basic, easy to understand control plan training for the end user, such as line operators etc. This is not indepth training for those creating control plans. I have all of that. I'd appreciate anything you might want to share.

Thanks!

 

[tatman]

Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

Torger

Quality Lead

Hydrualics/Fluid Power Manufacturing

Eaton Hydraulics - USA

6 Months:

I started in Customer Support and they have added a new position for improving broken process for Customer Support. I don't even know where to start...But have been thrown right into the mess.

My pet peeve is ideas never turning into an actions or solutions.

?

 

[cheri61]

Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

Hi, I'm Cheri
I have never participated in a forum before, so it will take me a bit to get firmilar w/ how to work w/ it . so thanks for your patience ahead of time.

2. I'm a Quality Manager, developing the managemnent systems, ISO's TS, UL...directing the day to day quality support of this site. also experiancing the journey down the lean road... one subject i'd like to learn about, leaning the buracracy. I've been involved with quality about almost 10 years now, wow didn't realize it's been that long...what aride.
3.A design & fabricator of packaging compoonents & custom molding from expandable resins. polypropolene, polystyrene..
stuf you find your computers packed in when you buy them. also do some automotive components as well. i have also had the pleasure of working in the fiberglass industry as well as Truck manufactureing, a few others as well.
4.EFP Corporation The elkart, in site.
5. i've been here about 2 1/2 years, hired in as a quality engineer, (not fully qualified) the 1st question during my interview was, if you could take my job would you?, my resopnce was , sure w/ some training & here i am. we were expecting a 2 or 3 year transition, but 6 months later, boom.
6. ???
7. my pet peeve in quality is not really w/ quality, but how people view quality personal. we're either viewed as police dogs or snictches & are expected to have all the answers NOW.
8.i'd have to give this one a bit of thought.

 

[jdblair]

Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

My background in manufacturing began as a metallurgical tech. (1983 – 1986) working for a company that supplied tungsten carbide bits for oilfield drilling. In 1986 I went to work for an automotive company (aluminum wheel division) working in their metallurgical lab (1986 – 1990) doing destructive testing (tensile testing), non-destructive testing (x-ray & fluoroscopic exams), metallurgical exams, and industrial spectrometry analysis. I then went to work in our metrology lab (1990 – 1996) where I performed 1st article inspections, CMM programming, and gage calibration. In 1997 I began working in the engineering dept. (1997 – 2001) as a CAD designer, doing 2d drafting and 3d modeling using ProEngineer software.

In 2001 I transferred to our Kentucky facility to take a Design Engineer position. In 2002 a decision was made to close this facility. At that time I decided to change careers to the Health Field. I graduated from a Radiography Program in 2005, and took national boards with the American Registry of Radiologic Technologist (ARRT) in Radiography and passed, earning the designation R.T. (R). I then applied to a Radiation Therapy Program and graduated in 2006. After graduation I took my ARRT boards in Radiation Therapy and passed, earning the designation R.T. (R) (T). Due to a lack of Radiation Therapy positions at this time in Kentucky, I have accepted a position as an atomotive interior/exterior supplier as a CMM Operator/Designer.

 

[robertwilson]

Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

1. Robert Wilson
2. Quality Manager
3. Heavy metal fabrication shop.
4. Hamilton Metal Works. Hamilton, Ontario, Canada
5. I have been in quality assurance for about 4 months. We are a fairly new company.
6. I have worked in the manufacturing field for over 25 years and have moved fron helper on shop floor to supervision to programming plasma and laser cutting machines.
7. The amount of paper work required sometimes seems like overkill.
8. Standardize procedures and how things are done so every outside quality inspector is speaking from the same book.

 

[sapna]

Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

Hello Everybody,

I am sapna and i would be thankful if i could get some help in finding template for requirements traceability matrix

regards
sapna

 

[RoxaneB]

Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

I am sapna and i would be thankful if i could get some help in finding template for requirements traceability matrix

Welcome, Sapna.

Towards the top right of your screen is the "Search" function. I recommend you go there and try to find what you are looking for. Or post a more specific question in the appropriate forum.

This thread is just to introduce yourself. We don't typically discuss management systems issues in this thread.