SBS - The best value in QMS software

The Original "Introductions" Thread started in 2001 and split off October 2009

Status
Not open for further replies.
Elsmar Forum Sponsor
A

Alek's

#1,492
#1,492
Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

1. Name: Oscar Martinez
2. Job Title: Project Engineer.
3. Industry: Injection molding and Metal stamping
4. Company: We make metal parts and plastic parts for a several companies which make PC's TV's and other kind of products
5. Length of time in quality function: 1 year
6. something personal that sets you apart: I'm 24 and I'm like do exercise.

I do not have so much experience for this reason I am learned a lot in this forum.

Regards!
 
R

Rizwan Khan

#1,493
#1,493
Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

Hello every one,
I have recently joined a Manufacturing Company which manufactures heavy mining equipment. They have asked to me work for their quality team. I am completely new to quality. My back ground is electrical engineering. The followign are the goals for me for year 2007. What is thecompnay really expecting from me? Any books that I need to refer for this kind of Job? Any classes/ Traning I need to take? Please give me your input. I have lilttle knowlege in Quality and I do understand ISO-9000, but nothing much more than that.

****
Question copied to new thread: New to Quality - How to achieve goals company has given me
 
H

hbacheler

#1,494
#1,494
New Guy - Harry Bacheler

:bigwave:
1. Name -
Harry M. Bacheler, Jr.
2. Job Title or explanation of what you do
Technical Writer, - Hardware, software, processes and procedures (Software Process Improvement)
3. Industry you're in or have been in
DoD, Hardware Mfg, Software Development,
4. Company you work for and location
Consultant/contractor (W2. with bennies), W2 (without bennies),
1099 employee, Contractor (invoice)
5. Length of time in quality function
0 time, however, I believe that the quality of the products that I have produced
have been commended for their quality
6. Something personal that sets you apart
Rapid learner, fit into many busines environments, work well with working
entities (internal and esternal)
7. Your pet peeve in quality
A lot of lip service in some areas
8. If you could change the world of quality, what would you do?
Make more people accountable for their work
 
K

kannanthegreat

#1,495
#1,495
Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

hi,

1. My name is R.Kannan
2. Assistant professor teaching quality management.
3. Education Industry
4. SSN School of management and computer application, kalavakkam, Tamilnadu, India
5. 22 years in Electricity board. 9 years in the teaching.
6.Play cricket, table tennis and chess.
7. My pet peeve is the lip service given to quality
8. My degree is in Business Administration, Electrical engineering and law
 
C

chiefs2105

#1,496
#1,496
Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

Name : Noorliza Sudin

Currently working as Collection Coordinator in one of the biggest Food Manufacturing in Malaysia...
 
Q

QA-Talport

#1,497
#1,497
Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

1. Name - Dorothy Mann
2. Job Title or explanation of what you do - Quality Systems Coordinator
Basically I plan and execute all internal auidts of our TS16949 and ISO14001 System. I am also in charge of IMDS and Document Control.
3. Industry you're in or have been in - Automotive Wiring Harnesses
4. Company you work for and location - Tal-Port Industries, LLC, Hattiesburg, MS. We also have plants in Yazoo City, MS; Saltillo, Mexico; Fresnillo, Mexico; and Guaymas, Mexico.
5. Length of time in quality function - 3 years
6. I am relatively new to quality. I never know QS9000. I was hired to help implement TS16949 and I basically learned it by implementing it.
7. Your pet peeve in quality - Quality only gets the go ahead to change anything if there has been a written nonconformance from a CB.
8. If you could change the world of quality, what would you do? I don't know, I haven't learned all I need to know yet.
 
A

AHall

#1,498
#1,498
Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

I have really gotten a lot out of this forum and all of you who participate. I was curious, though, who all of you are and what you do. How about letting us know a little bit about you and your background?
1. Name
2. Job Title or explanation of what you do
3. Industry you're in or have been in
4. Company you work for and location
5. Length of time in quality function
6. Something personal that sets you apart
7. Your pet peeve in quality
8. If you could change the world of quality, what would you do?

1. Albert

2. Quality Manager - I am currently implementing a quality system at a privately owned company that has never had a quality manager or any type of formal quality program.

3. I am currently in the automated utility meter reading industry, but I have worked in many different industries including printing, automotive, fiberglass, and plastics.

4. Datamatic - Plano, Texas

5. I have been in quality for about 10 years

6. ISO background

7. Lack of ownership of thye quality system by everyone in the company

8. ???
 
M

Marcelo

Inactive Registered Visitor
#1,499
#1,499
Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

1. Name: Marcelo Anunes
2. Job Title: Researcher / Compliance Engineer.
3. Industry: Medical Devices
4. Company: Institute for Technological Research - IPT - Electrical and Optical Equipment Laboratory -We´re a multi-lab research center, and my lab is performs P&D and safety tests.
5. Length of time in quality function: 6 years
6. something personal that sets you apart: i´m standar-addicted.

I´ve got an website / blog on medical electrical equipment safety - the Medical Electrical Equipment Information Website at www.electromedicalinfo.com - I don´t know if i can post the link here, but anyway...

Regards!
 
M

MajorBVNaik

Involved In Discussions
#1,500
#1,500
Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

Dear Sir,
I read your thoughts. I could not agree more even though I am a CB auditor for nearly ten years. I am an ex-Army officer who took voluntary retirement after twenty one years. I on panel of ten certification bocies. I conducted ISO 9001 & 14001 audits.
However it seems to me that unfortunately you have met the CB auditors like the ones you described. But let me assure you that all of us are not like that. That is why I am interacting with you as soon as I read your thoughts. I would love to be friends & interact with you as well as other like minded people on any forum
Regards
Major BV Naik
 
Status
Not open for further replies.
Thread starter Similar threads Forum Replies Date
E Original Brand Labeler (OBL) in China China Medical Device Regulations 2
N Original signed IQ/OQ/PQ missing - but have data - Do we do it over? ISO 13485:2016 - Medical Device Quality Management Systems 2
T More than One Original Test Report - Original Print General Measurement Device and Calibration Topics 4
P Who is the OEM (Original Equipment Manufacturer)? EU Medical Device Regulations 5
G Original Data Copying to Maintain Compliance with 21 CFR Part 820.180 US Food and Drug Administration (FDA) 2
F Can you reference original FAI (First Article Inspection) after Delta? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
V Supplier Moving Manufacturing Location after original PPAP APQP and PPAP 4
T Stamping Original Paper Document 'Record Copy' in Red Ink - Document Control Document Control Systems, Procedures, Forms and Templates 4
H ISO 9001:2000 Certificate - Original approval date 18 July 1995 and valid until 2012 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 27
Q OEM (Original Equipment Manufacturer) PPAP Applicability Query IATF 16949 - Automotive Quality Systems Standard 4
P Benchmark of OEM (Original Equipment Manufacturer) Sourcing Audit Process Audits and Layered Process Audits 8
Marc "This American Life" reveals original Coca-Cola recipe World News 0
G OEM (Original Equipment Manufacturer) Calibration of In-House Measurement Equipment General Measurement Device and Calibration Topics 18
S Reference to original Calibration Certificate - ISO 17025 Section 5.10.9 ISO 17025 related Discussions 4
P Medical Device OEM (Original Equipment Manufacturer) Agreements Other Medical Device and Orthopedic Related Topics 5
P What's the original definition of "sigma level"? Capability, Accuracy and Stability - Processes, Machines, etc. 1
D Training Records - Requirement to keep original copy of training/assessment form? Records and Data - Quality, Legal and Other Evidence 12
Stijloor OEM (Original Equipment Manufacturer) Requirements for Global MMOG/LE Completion Customer and Company Specific Requirements 15
M Original written signatures vs. Copies/scans/faxes/electronic documents US Food and Drug Administration (FDA) 24
W Requirement to save original, handwritten internal audit notes? US Food and Drug Administration (FDA) 11
J Required to put original manufacturers on Approved Supplier List? Supplier Quality Assurance and other Supplier Issues 6
T Monthly SPC original data sheets - What should be done with the reports? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 9
L Original Documentation - Need to maintain any original hand written documents ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 28
E [Ask] Original Equipment Manufacturing/Manufacturer Misc. Quality Assurance and Business Systems Related Topics 1
S Definition OEM (Original Equipment Manufacturer) - Exact definition of OEM Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 9
D Can we destroy original paper files before retention period if we scan them? Records and Data - Quality, Legal and Other Evidence 17
Marc Reporter Discovers People Living In Original Star Wars Set Coffee Break and Water Cooler Discussions 4
Marc 40th Anniversary of the original Star Trek - From the I'm Getting Old Department World News 22
M Is TS16949 Only for OEM (Original Equipment Manufacturer) Customers? IATF 16949 - Automotive Quality Systems Standard 8
J Internal Audit Reports - Mandatory to keep original paper copy? Internal Auditing 16
R Retention of records - Original Order Form vs. Computer Entry record - ISO 13485 Records and Data - Quality, Legal and Other Evidence 12
D Need to get ISO recertified for a site change, but just near to the original site? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
Q European Legislation 76/769/EEC - Seeking the original legislation Various Other Specifications, Standards, and related Requirements 4
B Honda - What's different from US OEM (Original Equipment Manufacturer) requirements? Customer and Company Specific Requirements 4
C Procedures - New Revision or Original Issue - Upgrading to ISO9001:2000 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
V Definition OEM - Definition of OEM - Original Equipment Manufacturer Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 8
Raffy Calibration Labels - Original Calibrating Date or New Date? General Measurement Device and Calibration Topics 9
V In-House Calibration vs. OEM (Original Equipment Manufacturer) Calibration General Measurement Device and Calibration Topics 2
D PPAP Master Parts - Do we have to save the original PPAP parts? APQP and PPAP 2
M Informational EU – Eudamed Data exchange services and entity models introductions Medical Device and FDA Regulations and Standards News 4
D Accurately measuring Full Thread Length Inspection, Prints (Drawings), Testing, Sampling and Related Topics 11
DuncanGibbons Additive Manufacturing Processes Thread Manufacturing and Related Processes 5
V Thread Plug Gage Pitch GO Diameter out of spec AQL - Acceptable Quality Level 8
C Aluminum galling on thread plug gauge Manufacturing and Related Processes 10
ScottK Measuring thread flank angle on a screw Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
G Oversized Threads - What sized stab pin would be best to quickly check for oversized thread holes General Measurement Device and Calibration Topics 5
H Thread Plug Gauge Tolerances General Measurement Device and Calibration Topics 3
A Cost effective thread gaging with ISO 9001 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
APHX02 Thread Roll Process Verification w/in AS9100 (i.e. BSP-F-69/AS8879) Manufacturing and Related Processes 2
C Thread Tolerance - Can I use a 3A Ring on a part that the drawing calls out for a 2A? Manufacturing and Related Processes 5

Similar threads

Top Bottom