SBS - The best value in QMS software

The Original "Introductions" Thread started in 2001 and split off October 2009

Status
Not open for further replies.
C

Chua Kwan Teng

#1,551
#1,551
Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

Dear PeaceWong

Oh... VE Stand for Value Engineering. This is a Design Tool in which the Design and Development Engineers make us of this technique to design a product with less parts, more functions. Or same number of parts as in the old design but more function.

I though Flextronics had employed a Lean Black Belt in Y2003 to implement lean.

I also conduct training for companies in Six Sigma or Lean Six Sigma in Singapore and China Wuxi. We have office in ShenZhen at NamShan.

You can look into the website ecciinternational.com/sg

Thanks and regards

KT Chua
 
Quickly Organize an Intelligent TDP from DISCUS
Elsmar Forum Sponsor
P

peacewong

#1,552
#1,552
Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

Dear KT,

Sorry for my mistake. I don't familiar with this company before I joined in. You're the eldest specialist on Lean & Six Sigma in Flextronics? For past three 3 years, I worked as an industrial engineer in Delphi. You realize that there are many differences on lean between Delphi and Flextronics. Do you work in Flextronics now?

Regards
Peace
 
C

Charles Scott - 2007

#1,553
#1,553
Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

I have been a long time lurker on this board, and have found it a great source to spark thinking. A little bit about myself:
My name is Charles Scott and I am a Master Black Belt / Quality Manager for American Express. I am located in Greensboro NC.
I have worked my entire career in services, starting at Walt Disney World, where I worked my way through college (BS and MS in Industrial Engineering) including stints in WDW's IE dept and Finance dept. I have been with Amex 11 years, primarily as an IE, but involved with quality since 1999.

On a personal note nobody would ever guess that I am half Brasilian and love the music, food and culture of Brasil.

My personal pet peeve in quality is using quality tools to justify decisions already made, instead of using quality tools to unlock the potential.

If I could change one thing about the world of quality, it would have to be to make non-quality people realize that we are actually a fun loving lot. :)
 
M

maxim

#1,554
#1,554
Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

Holla all, my name is Peter.
I'm a Quality Assurance Co ordinator.
Wires and cables Industry
I'm only three years in the business (yeah I'm green)
I try my best in what I set my mind to do.
Quality is free, but why do I have to pay to learn it huh!
 
M

mardatario

#1,555
#1,555
Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

Well I am a newbie at this forum, I was actually looking for a samples of IQA report form. Ours was under revision and I was looking for new form. If you guys could suggest where I could find one. thanks.

1. Name
Mar
2. Job Title or explanation of what you do
Docs. Controller
3. Industry you're in or have been in
-
4. Company you work for and location
phils.
5. Length of time in quality function
7 months
6. Something personal that sets you apart
--
7. Your pet peeve in quality
--
8. If you could change the world of quality, what would you do?
--
 
F

For_rolo

#1,556
#1,556
Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

1. My Name is Greg Pollock
2. Job Title - Quality Manager and OH&S Representative (but I am also the facilities Manager asa well)
3. Industry - Mostly occupied at the moment with Transport and Logistics, also conduct Auditor Training
4. Company - IFC Global Logistics and myself, Altona, (Melbourne) Victoria, Australia
5. Length of time in quality function - 31 years
6. Something personal that sets you apart - I have two daughters and a wonderful wife and I coach American Football here in Australia
7. Your pet peeve in quality - fads and the use of catch phrases
8. If you could change the world of quality, what would you do? Try and provide them with my experiances where management systems have saved companies for harm, including prosecution, and how it didn't cost them what all the scare mongers said it would at the beginning.
 
J

Jemos

Starting to get Involved
#1,557
#1,557
Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

Hi.
My name is Odongo James
Job Title - Quality Environment Health and Safety Manager
Industry - Construction
Company - Spencon in Kenya (East Africa)
Experience - 8 years in the quality field

If i would change this world of quality - Would ensure that organizations appreciate that quality management systems are about business performance improvement and not just certficates
 
A

anitha.kuppuswamy

#1,558
#1,558
Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

hi,
I am Anitha -Quality Analyst n a software company

Find this forum as very interesting and like to join here

I think we all will rock:biglaugh:
 
A

Anfield Red

#1,559
#1,559
Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

Hi All this is Anfield Red here!! (This is in reference to Liverpool Football Club for those not in the know)

I am currently applying for a contractor position in an electromagnetics firm so thought I would take the time to do some catchup on this subject as it has been some time since I have used ISO 18001 (or BS8800 / ISO 14001 Etc...)

Just to say what a great site and it looks as though there are some highly knowledgeable people out there - I will definately be returning to pick some of the brains - especially on the electromagnetic front.....:)

Nice to meet everyone... "You'll Never Walk Alone"

Anfield Red
 
I

IndySon35

#1,560
#1,560
Re: New Folks - Please Take a Minute and Introduce Yourself / Say Hello!

Enjoyed the intros above...some familiar companies and industries.

1. Name- Jim B (IndySon refers to my status as oldest son of a USS Indianapolis CA-35 Survivor, the WWII Heavy Cruiser that took the atomic bomb to Tinian & was sunk right afterwards. Dad spent 4.5 days int he water, and luckily, survived)
2. Job Title or explanation of what you do- Quality Manager, Chief Cook & Bottle Washer
3. Industry you're in or have been in- Manufacturing, Fabrication & Assembly/Test, Military & Commercial
4. Company you work for and location- Prefer to keep a lower profile just in case
5. Length of time in quality function- Since 1982
6. Something personal that sets you apart- 6 foot Asian American...LOL...nobody can tell but they all look at me and wonder, "What is he?". In today's PC world, it's just not possible to ask any more
7. Your pet peeve in quality- Too often I discover "Manufacturing Rejects" are placed in quality (i.e., one is too many) both up & down the external chain from me. Bad idea, they can hurt you twice as much there...well, unless you ignore your quality people anyway
8. If you could change the world of quality, what would you do? Go to the "proof is in the pudding" concept. Instead of telling everyone how to comply with your quality requirements, expending great energy with systems definition & compliance inspection beyond bare minimum, we should all focus more on examining the results (the product) and seriously track results...then reward those who deliver a quality product (meets all requirements/specs) with more work and absolutely cut off those who do not get the job done. "That's all I got to say about that"
 
Status
Not open for further replies.
Thread starter Similar threads Forum Replies Date
E Original Brand Labeler (OBL) in China China Medical Device Regulations 2
N Original signed IQ/OQ/PQ missing - but have data - Do we do it over? ISO 13485:2016 - Medical Device Quality Management Systems 2
T More than One Original Test Report - Original Print General Measurement Device and Calibration Topics 4
P Who is the OEM (Original Equipment Manufacturer)? EU Medical Device Regulations 5
G Original Data Copying to Maintain Compliance with 21 CFR Part 820.180 US Food and Drug Administration (FDA) 2
F Can you reference original FAI (First Article Inspection) after Delta? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
V Supplier Moving Manufacturing Location after original PPAP APQP and PPAP 4
T Stamping Original Paper Document 'Record Copy' in Red Ink - Document Control Document Control Systems, Procedures, Forms and Templates 4
H ISO 9001:2000 Certificate - Original approval date 18 July 1995 and valid until 2012 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 27
Q OEM (Original Equipment Manufacturer) PPAP Applicability Query IATF 16949 - Automotive Quality Systems Standard 4
P Benchmark of OEM (Original Equipment Manufacturer) Sourcing Audit Process Audits and Layered Process Audits 8
Marc "This American Life" reveals original Coca-Cola recipe World News 0
G OEM (Original Equipment Manufacturer) Calibration of In-House Measurement Equipment General Measurement Device and Calibration Topics 18
S Reference to original Calibration Certificate - ISO 17025 Section 5.10.9 ISO 17025 related Discussions 4
P Medical Device OEM (Original Equipment Manufacturer) Agreements Other Medical Device and Orthopedic Related Topics 5
P What's the original definition of "sigma level"? Capability, Accuracy and Stability - Processes, Machines, etc. 1
D Training Records - Requirement to keep original copy of training/assessment form? Records and Data - Quality, Legal and Other Evidence 12
Stijloor OEM (Original Equipment Manufacturer) Requirements for Global MMOG/LE Completion Customer and Company Specific Requirements 15
M Original written signatures vs. Copies/scans/faxes/electronic documents US Food and Drug Administration (FDA) 24
W Requirement to save original, handwritten internal audit notes? US Food and Drug Administration (FDA) 11
J Required to put original manufacturers on Approved Supplier List? Supplier Quality Assurance and other Supplier Issues 6
T Monthly SPC original data sheets - What should be done with the reports? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 9
L Original Documentation - Need to maintain any original hand written documents ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 28
E [Ask] Original Equipment Manufacturing/Manufacturer Misc. Quality Assurance and Business Systems Related Topics 1
S Definition OEM (Original Equipment Manufacturer) - Exact definition of OEM Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 9
D Can we destroy original paper files before retention period if we scan them? Records and Data - Quality, Legal and Other Evidence 17
Marc Reporter Discovers People Living In Original Star Wars Set Coffee Break and Water Cooler Discussions 4
Marc 40th Anniversary of the original Star Trek - From the I'm Getting Old Department World News 22
M Is TS16949 Only for OEM (Original Equipment Manufacturer) Customers? IATF 16949 - Automotive Quality Systems Standard 8
J Internal Audit Reports - Mandatory to keep original paper copy? Internal Auditing 16
R Retention of records - Original Order Form vs. Computer Entry record - ISO 13485 Records and Data - Quality, Legal and Other Evidence 12
D Need to get ISO recertified for a site change, but just near to the original site? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
Q European Legislation 76/769/EEC - Seeking the original legislation Various Other Specifications, Standards, and related Requirements 4
B Honda - What's different from US OEM (Original Equipment Manufacturer) requirements? Customer and Company Specific Requirements 4
C Procedures - New Revision or Original Issue - Upgrading to ISO9001:2000 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
V Definition OEM - Definition of OEM - Original Equipment Manufacturer Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 8
Raffy Calibration Labels - Original Calibrating Date or New Date? General Measurement Device and Calibration Topics 9
V In-House Calibration vs. OEM (Original Equipment Manufacturer) Calibration General Measurement Device and Calibration Topics 2
D PPAP Master Parts - Do we have to save the original PPAP parts? APQP and PPAP 2
M Informational EU – Eudamed Data exchange services and entity models introductions Medical Device and FDA Regulations and Standards News 4
D Accurately measuring Full Thread Length Inspection, Prints (Drawings), Testing, Sampling and Related Topics 11
DuncanGibbons Additive Manufacturing Processes Thread Manufacturing and Related Processes 5
V Thread Plug Gage Pitch GO Diameter out of spec AQL - Acceptable Quality Level 8
C Aluminum galling on thread plug gauge Manufacturing and Related Processes 10
ScottK Measuring thread flank angle on a screw Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
G Oversized Threads - What sized stab pin would be best to quickly check for oversized thread holes General Measurement Device and Calibration Topics 5
H Thread Plug Gauge Tolerances General Measurement Device and Calibration Topics 3
A Cost effective thread gaging with ISO 9001 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
APHX02 Thread Roll Process Verification w/in AS9100 (i.e. BSP-F-69/AS8879) Manufacturing and Related Processes 2
C Thread Tolerance - Can I use a 3A Ring on a part that the drawing calls out for a 2A? Manufacturing and Related Processes 5

Similar threads

Top Bottom