SBS - The best value in QMS software

The Original "Introductions" Thread started in 2001 and split off October 2009

Status
Not open for further replies.
C

Cubic

#2,601
#2,601
Re: New Folks - Please Take a Minute and Introduce Yourself/Say Hello!

Hello,

I'm new to the site. It looks very interesting and could probably help me in lots of situations that leaves me pulling my hair out.

My name is Andrew.

I am an OHS Manager,

for a medium size construction company who deals in interior fit-outs.

We are based in Sydney.

A particular question if I may ask. Has anyone here had much to do with gaining FSO accreditation? I'd really like to fast track someone with that experience ... before I end up entirely bald!

My thanks and I hope to visit this site frequently. *g*
 
Popular whitepapers from DISCUS
Elsmar Forum Sponsor
M

mohamed iqbal

Registered
#2,602
#2,602
Re: New Folks - Please Take a Minute and Introduce Yourself/Say Hello!

My Name is Mohamed IQBAL
I am currently attached to a Foundry as Training/Quality Consultant.
I was working in semiconductor backend assembly for more than 25 years and hope to share some practices from there to foundry. In my last postion at STMicroelectronics, I was the SPC Mannager for Muar plant.
I am based in Malaysia and after leaving STMicro, am advising small and medium industries around here in Malaysia.
Hope to learn from others on foundry quality systems, process controls and training required.

I have really benefitted from the materials shared by all the members in this forum.
 
Marc

Marc

Hunkered Down for the Duration with a Mask on...
Staff member
Admin
#2,603
#2,603
Re: New Folks - Please Take a Minute and Introduce Yourself/Say Hello!

Welcome everyone!​
OK - Where is everyone???

Frapper
and
mapservices.org

If you haven't already - Please take a minute and Map Yourself!

Thanks!

Marc
 
Last edited:
M

munagada

#2,604
#2,604
Re: New Folks - Please Take a Minute and Introduce Yourself/Say Hello!

1. Name:
M Rama Krishna

2. Job Title or explanation of what you do
Sr. Manager (TQM)

- Implementation of Business Excellence Models - CII-Exim (equivalent to EFQM), IMC Ramkrishna Bajaj (equivalent to Malcolm Balridge), TS-16949 and ISO-9K, 14K, OHSAS-18001

- Implementation of Six-sigma


3. Industry you're in or have been in
Was with TUV Rheinland, and British Standards as Lead Auditor for ISO-9001, ISO-14001, and OHSAS-18001

Also worked as a consultant, and spent 3 years with Dairy Board, know ISO-22000.

Presently working with Steel Industry.

4. Company you work for and location
JSW Steel, India

5. Length of time in quality function

~8 years

6. Something personal that sets you apart

Emphasis on Root Cause Analysis

7. Your pet peeve in quality

ISO. Many people feel Quality is synonymous with ISO and involves tons of documentation.

8. If you could change the world of quality, what would you do?

Abolish ISO :D
 
G

gaspardck

#2,605
#2,605
Re: New Folks - Please Take a Minute and Introduce Yourself/Say Hello!

1. Name - Christopher Gaspard
2. Job Title - RCM Equipment Engineer
3. Industry - Oil & Gas
4. Job Shop - London
5. Length of Time in Quality Function - N/A
6. Something Personal- Capoeira
7. Pet Peeve in Quality - Talkers
8. No comment
 
C

Cubic

#2,608
#2,608
Re: New Folks - Please Take a Minute and Introduce Yourself/Say Hello!

Sent by Rama in previous post

"If you could change the world of quality, what would you do?"

"Abolish ISO" :D

Love it! Hahaha...
 
I

Ivan13

#2,609
#2,609
Re: New Folks - Please Take a Minute and Introduce Yourself/Say Hello!

1. Name-Ivan.Z
2. Job Title-Purchaser
3. Industry -SD card, metal sheet, transformer, haircare and solar panel
4. Company-China maidland
5. Length of time in quality function-3years
6. Something personal that sets you apart-money stuff
7. Your pet peeve in quality-lips service, people don't fouce on quality improving but short time money making
8. If you could change the world of quality, what would you do?-standard all the quality of goods.
 
L

Lomai

#2,610
#2,610
Re: New Folks - Please Take a Minute and Introduce Yourself/Say Hello!

Bula,

My name is Lomai and I am from the Fiji Islands.
I work for the airport authority here and am just getting my toes dipped into quality control processes.
Hope to learn a lot from you all.
 
Status
Not open for further replies.
Thread starter Similar threads Forum Replies Date
E Original Brand Labeler (OBL) in China China Medical Device Regulations 2
N Original signed IQ/OQ/PQ missing - but have data - Do we do it over? ISO 13485:2016 - Medical Device Quality Management Systems 2
T More than One Original Test Report - Original Print General Measurement Device and Calibration Topics 4
P Who is the OEM (Original Equipment Manufacturer)? EU Medical Device Regulations 5
G Original Data Copying to Maintain Compliance with 21 CFR Part 820.180 US Food and Drug Administration (FDA) 2
F Can you reference original FAI (First Article Inspection) after Delta? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
V Supplier Moving Manufacturing Location after original PPAP APQP and PPAP 4
T Stamping Original Paper Document 'Record Copy' in Red Ink - Document Control Document Control Systems, Procedures, Forms and Templates 4
H ISO 9001:2000 Certificate - Original approval date 18 July 1995 and valid until 2012 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 27
Q OEM (Original Equipment Manufacturer) PPAP Applicability Query IATF 16949 - Automotive Quality Systems Standard 4
P Benchmark of OEM (Original Equipment Manufacturer) Sourcing Audit Process Audits and Layered Process Audits 8
Marc "This American Life" reveals original Coca-Cola recipe World News 0
G OEM (Original Equipment Manufacturer) Calibration of In-House Measurement Equipment General Measurement Device and Calibration Topics 18
S Reference to original Calibration Certificate - ISO 17025 Section 5.10.9 ISO 17025 related Discussions 4
P Medical Device OEM (Original Equipment Manufacturer) Agreements Other Medical Device and Orthopedic Related Topics 5
P What's the original definition of "sigma level"? Capability, Accuracy and Stability - Processes, Machines, etc. 1
D Training Records - Requirement to keep original copy of training/assessment form? Records and Data - Quality, Legal and Other Evidence 12
Stijloor OEM (Original Equipment Manufacturer) Requirements for Global MMOG/LE Completion Customer and Company Specific Requirements 15
M Original written signatures vs. Copies/scans/faxes/electronic documents US Food and Drug Administration (FDA) 24
W Requirement to save original, handwritten internal audit notes? US Food and Drug Administration (FDA) 11
J Required to put original manufacturers on Approved Supplier List? Supplier Quality Assurance and other Supplier Issues 6
T Monthly SPC original data sheets - What should be done with the reports? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 9
L Original Documentation - Need to maintain any original hand written documents ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 28
E [Ask] Original Equipment Manufacturing/Manufacturer Misc. Quality Assurance and Business Systems Related Topics 1
S Definition OEM (Original Equipment Manufacturer) - Exact definition of OEM Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 9
D Can we destroy original paper files before retention period if we scan them? Records and Data - Quality, Legal and Other Evidence 17
Marc Reporter Discovers People Living In Original Star Wars Set Coffee Break and Water Cooler Discussions 4
Marc 40th Anniversary of the original Star Trek - From the I'm Getting Old Department World News 22
M Is TS16949 Only for OEM (Original Equipment Manufacturer) Customers? IATF 16949 - Automotive Quality Systems Standard 8
J Internal Audit Reports - Mandatory to keep original paper copy? Internal Auditing 16
R Retention of records - Original Order Form vs. Computer Entry record - ISO 13485 Records and Data - Quality, Legal and Other Evidence 12
D Need to get ISO recertified for a site change, but just near to the original site? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
Q European Legislation 76/769/EEC - Seeking the original legislation Various Other Specifications, Standards, and related Requirements 4
B Honda - What's different from US OEM (Original Equipment Manufacturer) requirements? Customer and Company Specific Requirements 4
C Procedures - New Revision or Original Issue - Upgrading to ISO9001:2000 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 3
V Definition OEM - Definition of OEM - Original Equipment Manufacturer Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 8
Raffy Calibration Labels - Original Calibrating Date or New Date? General Measurement Device and Calibration Topics 9
V In-House Calibration vs. OEM (Original Equipment Manufacturer) Calibration General Measurement Device and Calibration Topics 2
D PPAP Master Parts - Do we have to save the original PPAP parts? APQP and PPAP 2
M Informational EU – Eudamed Data exchange services and entity models introductions Medical Device and FDA Regulations and Standards News 4
D Accurately measuring Full Thread Length Inspection, Prints (Drawings), Testing, Sampling and Related Topics 11
DuncanGibbons Additive Manufacturing Processes Thread Manufacturing and Related Processes 5
V Thread Plug Gage Pitch GO Diameter out of spec AQL - Acceptable Quality Level 8
C Aluminum galling on thread plug gauge Manufacturing and Related Processes 10
ScottK Measuring thread flank angle on a screw Inspection, Prints (Drawings), Testing, Sampling and Related Topics 1
G Oversized Threads - What sized stab pin would be best to quickly check for oversized thread holes General Measurement Device and Calibration Topics 5
H Thread Plug Gauge Tolerances General Measurement Device and Calibration Topics 3
A Cost effective thread gaging with ISO 9001 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
APHX02 Thread Roll Process Verification w/in AS9100 (i.e. BSP-F-69/AS8879) Manufacturing and Related Processes 2
C Thread Tolerance - Can I use a 3A Ring on a part that the drawing calls out for a 2A? Manufacturing and Related Processes 5

Similar threads

Top Bottom