The Top 10 Training Topics for Customer Focus

C

ccochran

#1
Howdy, friends:

Here are some thoughts on training and how it relates to driving customer focus in organizations. It is entitled, "The Top 10 Training Topics for Customer Focus." This piece is part of a book I'm writing on customer focus. As always, I would love to hear what you think about it, positive and negative.

Craig
 

Attachments

Elsmar Forum Sponsor
B

Bill Ryan - 2007

#2
Another excellent article, Craig.

As I came to the end I found that I had to reread everything after Topic #8. I just couldn't stop thinking of different "ethical" issues I've run across throughout my working career and how I've learned to handle different situations (although I still have the "insert foot......" syndrome occasionally).

Nice job :applause:
 
C

ccochran

#3
Bill,

Thanks a lot for your feedback. Ethics seems to be one of those training topics that only sees the light of day when there's a crisis--not when everything is fine. Of course, there might not ever be a crisis if ethics was a normal issue that was regularly discussed and trained on.

Can you think of any other training topics that could help drive customer focus?

Craig
 
B

Bill Ryan - 2007

#4
One thing that I deal with on an almost daily basis revolves around "good enough". For instance - An operator/inspector will identify something as out of specification "by a pinch". The cell technician or manager will sign off the NCM ticket as "OK to process" and ship parts. The reasoning, many times, is that "it won't affect the fit/function or the customer's process and they won't even be aware of it. We'll fix it later". 9 times out of 10 that may be true but....! While I fully understand that our economics come in to play, the attitude just doesn't sit right with me most of the time. My biggest issue with it pertains to the message we send to the operator/inspector. When it happens too often (without following topic #4 - Effective Communication) they begin to continuously "fudge" numbers because "it doesn't matter". Perhaps this is already "implied" in one or more of the topics but it doesn't jump out at me.

Just a minor "vent" - One other thing we are ridiculously good at is "blamestorming". I realize this ties in to Topic #6 (Root Cause Analysis) but I just laugh to myself as in each instance it seems we try to find out who to "write up" as a first step. I am so tired of sitting in on problem solving meetings and spending the first half of the meeting trying to determine who messed up. :frust:
 
C

Craig H.

#5
ccochran said:
Bill,

Thanks a lot for your feedback. Ethics seems to be one of those training topics that only sees the light of day when there's a crisis--not when everything is fine. Of course, there might not ever be a crisis if ethics was a normal issue that was regularly discussed and trained on.

Can you think of any other training topics that could help drive customer focus?

Craig

Craig:

While it makes sense to seperate these topics as you did, I think it is important to emphasize, maybe at the end of the piece, that each skill is a subset of the "serve the customer" whole.

For instance, communication is very important, as you pointed out. Document control is a part of the communications picture. Communicate a lie, and the effectiveness of all communications is reduced. So, in a way, these issues are interrelated.

Also, there might be some people who will say that EVERY company exists to make a profit. That may be true, but every PERSON within that company is not necessarily there to make a profit (unless a paycheck counts as profit). Most, if not all, have an impact on customer service in some way, and that impact surely had an influence on the creation of their position in the first place.

Once again, a very good piece, with some interesting views. Good job!!
 
C

ccochran

#6
Bill,

I had never heard the term "blamestorming" before, but I think I've participated in a few of those sessions in the past! How to break out of that is the big question. If your organization has a defined problem solving method, maybe it could be revised to include a specific step of "focus on the problem, not the people." I'm a huge proponent of simple step-by-step problem solving methods that enable teams to focus on the problem and its true causes, instead of on the supposed "people who screwed up." Your discussion of 'good enough' is right on the money.

Craig,

Great point. I need to bring the whole article back around to the fact that all the training topics are intermeshed and inseparable from one another. The all must be integrated for any of them to work well. And your point about everyone not being there to make a profit is correct. Ultimately, the combined actions of everyone converge in such a way that the organization realizes a profit. Individually, people's jobs often have nothing whatsoever to do with net income in the micro sense. It's the accumulated efforts of everyone that gets the job done. Excellent commentary, CH.

Talk to you soon,
Craig
 
J

Jim Howe

#7
Craig, I found the article to be well thought and well written. I do however have concerns with Time Management. A lot of folks wear more then one hat now a days and trying to prepare the next day in advanced would be a difficult situation. We just don't know what the next day will bring. its kind of like fortelling the future.

For example, I have several task that I must perform on a daily basis, providing an event happens! One of my tasks would be to write ECR's (engineering change request). The number of ECR's I write in a single day varies from zero to ten or more (sometimes takes up the whole day). The same goes for the number of NCR's (nonconformance reports), which i also write. How do you plan ahead with these kind of tasks?

How about the "Top Nine..." as title? or can you give Time Management a little more thought and revise it?

I especially like the training for Root Cause Analysis and the Mission and Stradegy. Of the two I think the Mission and stradegy would be the most beneficial.

Thanks for great article! :applause:
 

Wes Bucey

Quite Involved in Discussions
#8
I think most of us have time management problems. Even though I know how to handle them on a theoretic basis, I still have emotional issues dealing with priorities. The toughest part is avoiding "overbooking your time."

The major downside is the feeling of failure when you are unable to complete everything on your "to do" list.

This is definitely a case of "Do as I say, not as I do."

To achieve real satisfaction in our lives, we have to be VERY realistic in scheduling our time. Often this means saying, "NO!" to requests and claims on our time. If we decide to change priorities in midstream, we have to realize that some things from the original list will fall to the wayside.

There was a time in my life when I put in 80 and 100 hour workweeks, but I was more than adequately compensated (or so I thought then.) In retrospect, I traded family and friends for money and prestige, but I had created a little "fiction" that I was earning the money for them.

Ultimately, each of us makes decisions about priorities. We only hope we have sufficient information to make the correct decision.
 
C

ccochran

#10
Jim, Wes, and Randy:

Thanks for your insightful feedback. I went back and looked at the Time Management section of the article. Yes, I think I could probably clarify this a bit. In my own little world, time management boils down to thinking about the major tasks I have do, the night before I have to do them. There will always be distractions and things that pop up, but I try like the devil to knock down the tasks I had planned on attacking. In fact, I'll carry around a little index card in my pocket with all my "To-Dos" on it, crossing each of them off as the day progresses. The index card is my Palm Pilot. If it's been a good day, I can toss the day's Palm Pilot into the recycling bin. If it's been a bad day, I'll have to finish the list the next day. But at least I am focused every day on what I'm hoping to do. Very basic stuff, but complex things don't work for me. I think I'm going to edit the time management section a bit.

Thanks again, guys. It's a beautiful weekend in Atlanta. I hope it's a nice one where you are.

Craig
 
Thread starter Similar threads Forum Replies Date
V 18001 2nd stage 3rd party Top Management Questions (Training Assignment) General Auditing Discussions 8
L Quality Table Top Exercise - ISO9001 Awareness Training to the operators Training - Internal, External, Online and Distance Learning 13
somashekar Top Management and Competence, Awareness, Training ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 25
Z Top Management (Exempt Staff) vs. Training and Competency ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 16
lanley liao What shoud i do if our company top management has been changed. Oil and Gas Industry Standards and Regulations 8
Q Example Process orientation to the process leadership, management, goals (tasks of the top management) ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
B OSHA Top Ten webinar, March 31 (free online) [Deleted] Misc. Quality Assurance and Business Systems Related Topics 1
Richard Regalado Top 10 operational risks of 2019 for business continuity planning Business Continuity & Resiliency Planning (BCRP) 6
E Resources for Planning for top quality Business Continuity & Resiliency Planning (BCRP) 6
Sidney Vianna Informational ISO 13485 Certificates Top 10 Countries - 2004 to 2017 ISO 13485:2016 - Medical Device Quality Management Systems 0
Sidney Vianna Informational ISO 14001 Certificates Top 15 Countries - 1999 to 2017 ISO 14001:2015 Specific Discussions 3
E Functional Gage for TOP applied at RFS Design and Development of Products and Processes 5
D Doing both a top-down and a bottom-up risk assessment - How to combine ISO 14971 - Medical Device Risk Management 13
C Is CE Mark needed for a small DAC audio board on top of a Rasberry PI? CE Marking (Conformité Européene) / CB Scheme 1
K About ionizers - How far can we place a table top ionizer from the IC devices Manufacturing and Related Processes 1
M Medical Device News ECRI – 2019 Top 10 Health Technology Hazards Medical Device and FDA Regulations and Standards News 0
Q Top Management Change Prior to Certification ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
Sidney Vianna Top 10 Major and minor NC's during IATF 16949:2016 Audits IATF 16949 - Automotive Quality Systems Standard 8
Q Risks Examples in Top Management ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
Q Additional KPI to Top Management beside Quality Objectives ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
K Top Executive Management ISO 9001:2015 and IATF 16949 Overview IATF 16949 - Automotive Quality Systems Standard 4
S What defines Top Management after a Merger? Quality Management Review (9.3.1) Management Review Meetings and related Processes 1
N Root Cause Challenge: The guy at the top ... Problem Solving, Root Cause Fault and Failure Analysis 4
M ECRI Top 10 Health Technology Hazards for 2017 Other Medical Device and Orthopedic Related Topics 3
L Auditing Top Management - Meeting Competency Requirements and Questions to Ask General Auditing Discussions 11
Q Who can Change goals and kpi of top management? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
L Engaging Top Management ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
Marc 15 minute Top Management presentation on ISO 9001:2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 23
A FTA-Top/Down approach to Risk Analysis ISO 14971 - Medical Device Risk Management 2
SATHYABALARAMAN OHSAS 18001:2007 4.4.1 Top management appointee Occupational Health & Safety Management Standards 8
A Creative ways to access Expert Information when you can't afford a top $ Consultant Misc. Quality Assurance and Business Systems Related Topics 7
D Best Engineering Practices related to Top Assembly Drawings Document Control Systems, Procedures, Forms and Templates 6
R Performance Qualification on a Table Top Centrifuge ISO 13485:2016 - Medical Device Quality Management Systems 3
Chennaiite Can an Auditor question Top Management decision to approve deviation? IATF 16949 - Automotive Quality Systems Standard 30
Y Differences between Top Management, Management & Organization ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 5
Marc ISO 9001:2015 Structure - Top Level Clauses ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 18
T Uncertainty (Top Down Method)! Auditor argues that this is not enough Measurement Uncertainty (MU) 14
D Redundant BOMs - Maintaining a Reference Only BOM on our Top Level Assembly Drawings Document Control Systems, Procedures, Forms and Templates 7
C Recommended Sealing for Granite Top in a Clean Room US Food and Drug Administration (FDA) 1
Stijloor "Top Gear" (UK) Jeremy Drives a Reliant Robin Funny Stuff - Jokes and Humour 8
M The requirement for Communication via Top Management Quality Manager and Management Related Issues 4
Wes Bucey FWIW: Top Reported OSH Violations Occupational Health & Safety Management Standards 5
SATHYABALARAMAN ISO Systems Annual Report to Top Management example wanted IATF 16949 - Automotive Quality Systems Standard 10
M Helping Top Management Prepare for an ISO 14001 Audit ISO 14001:2015 Specific Discussions 4
S Quality Policy without Top Management Signature Quality Manager and Management Related Issues 37
K Questioning Top Management on The Quality Policy during Internal Audits Internal Auditing 7
B Categorization of Customer Complaint: Making Customers feel they are Top Priority Customer Complaints 4
L QMS for Service Company - Top Management wants to take the role of QMR Quality Manager and Management Related Issues 5
AnaMariaVR2 The Top 12 FDA 2011 Warning Letters Report US Food and Drug Administration (FDA) 7
A Safety Culture in Top Management - The Workplace Safety & Health Act Quality Manager and Management Related Issues 25

Similar threads

Top Bottom