TickIT vs.ISO 9000-3 vs. ISO 9001 vs. CMM/SEI guidelines @ Level 3

J

J.R. Strickland

#1
Does anyone have any information on ISO 9000-3 and TickIT and the impact on this with the pending release of ISO 9000:2000? Will ISO 9000-3 be updated? My company, currently operating under the CMM/SEI guidelines @ Level 3, is evaluating TickIT registration due to some customer inputs. Our concern is we could get registered this year and have an obsolete certificate by December if ISO 9000-3 is not updated. Any information would be appreciated.
 
Elsmar Forum Sponsor

Marc

Hunkered Down for the Duration
Staff member
Admin
#2
I thought I read somewhere that ISO 9000-3 was being phased out. If I remember where I saw that I'll get back with you.
 
A

Andy Bassett

#3
Whilst we are on the subject, i recently turned a job down because it involved building a companies processes around this standard, and i know nothing about it.

Does anyone want to have a go at outlining this standard?. Is it wildly different from 9001/2? What is the key content.? Is it unheard of for Software companies to register to the normal ISO 9001/2

Regards

------------------
Andy B

[This message has been edited by Andy Bassett (edited 12 July 2000).]
 
M

Mike A

#4
A new version of the TickIT Guide is being prepared at the moment for release at the end of the year. The new Guide addresses the requirements of 9000:2000, and also takes into account ISO 12207 - Software life cycle processes.

Hope this helps.
 
A

Andy Bassett

#5
I may have to face this company again soon, is there anybidy out there who could give me for example an brief explanation about the differences between ISO 9001 and ISO 9003.

I would appreciate the help.

Regards


------------------
Andy B
 
#6
A link that may explain how ISO 9000-3 (guidance on implementing ISO 9001 for software), rather than ISO 9003 (Final Inspection and Testing) is given below: ***DEAD LINK REMOVED***
Good Luck
 
M

Mike A

#8
A point that sometimes causes confusion is that, if you are developing a quality system for registration to ISO 9001 and TickIT, the assessors will audit your system against the 20 clauses of ISO 9001 - not against the TickIT Guide or ISO 9000-3.

They will use the Auditor Guidance section of the Guide for interpretation, but your assessment report, non-conformances etc will all be referenced to ISO 9001 (or 9002/9003 if reduced scope).

Until a year ago software producing companies in the UK could only obtain combined ISO 9000/TickIT certification, but this requirement has now been changed, and you can now be registered to ISO 9001 alone.

However, since 9000:2000 incorporates a lot of the process-oriented requirements that are missing from 9000:1994, so the new standard should relate better to IT than the old one did, and companies may choose ISO 9001 rather than ISO 9001/TickIT.

------------------


[This message has been edited by Mike A (edited 09 August 2000).]
 
V

venkat

#10
I would like to know the specific differences between ISO 9000:2000 and TickIT.

Where Can I donwload the copy of tickit guide.
I am aware that it is not available for download at Tickit site.

Apart from that is there any site where I can download
Any help from the viewers please
 
Thread starter Similar threads Forum Replies Date
Hershal Couple of generic TickIT and ISO 27000 questions IEC 27001 - Information Security Management Systems (ISMS) 9
F TickIT vs. ISO9000-3 vs. ISO 9001 - What are the Differences? Software Quality Assurance 7
C TickIT presentation Software Quality Assurance 3
R Latest TickIT Version as of February 2005 - Issue 5 Software Quality Assurance 2
K Different between the ISO9001:2000 and the Tickit standard in software Software Quality Assurance 2
V Tick IT - Regional representative for TICKIT at Chennai Software Quality Assurance 5
N A TickIT strategy Software Quality Assurance 1
R Pointing in the right direction for TickIT - Software Development Processes Software Quality Assurance 2
K ISO 13485 clause 8.5.2 'Any necessary CA shall be taken without undue delay' ISO 13485:2016 - Medical Device Quality Management Systems 2
Aymaneh ISO 11607-1: 2019 main changes Other Medical Device Related Standards 2
G National Structural Steel Specification 7th Edition - Do I now have to be audited against ISO 3843-3 as well as ISO 9001? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 0
J How much to charge for helping a startup company with initial ISO 13485 certification? Consultants and Consulting 3
J ISO 13485 System 'soft start' - How to best reflect this in initial audits, management review minutes and other records? ISO 13485:2016 - Medical Device Quality Management Systems 3
L How to understand the clause 6 Planning of ISO 9001:2015 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 11
D ISO 13485 - 7.3.6 Design and development verification - Do most folks create a separate SOP? ISO 13485:2016 - Medical Device Quality Management Systems 4
B ISO 8536-4 Contamination Index ISO 13485:2016 - Medical Device Quality Management Systems 0
S Practical Implementation of ISO 14971 ISO 14971 - Medical Device Risk Management 6
C ISO 13485 :2016 - CAPA - Does every CAPA need to be checked by regulations? ISO 13485:2016 - Medical Device Quality Management Systems 9
L Process changes and biocompatibility (ISO 10993-1) Other Medical Device Related Standards 1
J Recommendations for online ISO 19011 training? Training - Internal, External, Online and Distance Learning 6
D ISO 13485 8.2.1 and 8.2.2 - Customer Feedback and Customer Complaints ISO 13485:2016 - Medical Device Quality Management Systems 5
S Requirements to obtain ISO 50001 Certification ISO 14001:2015 Specific Discussions 2
A ISO 11135:2014, B.1.4, BI resistance x product bioburden ISO 13485:2016 - Medical Device Quality Management Systems 6
Sravan Manchikanti How to interpret '8.3 Control of nonconforming product' for SaMD device while implementing ISO 13485 & MDSAP ISO 13485:2016 - Medical Device Quality Management Systems 4
J Sister-company providing parts is only ISO 9001 registered IATF 16949 - Automotive Quality Systems Standard 7
M Getting started in ISO 13485 ISO 13485:2016 - Medical Device Quality Management Systems 21
G Copy of withdrawn ISO 9001:1994 Quality Management Standard ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
P ISO 80369 and endoscope port/lumen Other ISO and International Standards and European Regulations 4
C ISO 639-1 Languages Other Medical Device Related Standards 0
B ISO 11607-2 "Critical Parameter" vs. "Process Parameter" Other Medical Device Related Standards 3
S ECG Cable Banana to Snap or Tab electrode Adapters -- ISO 10993 Requirement Other Medical Device Related Standards 0
I ISO 2233:2000 Question - Medical Device Shipping/Transportation Validation Other ISO and International Standards and European Regulations 1
P ISO Class 8 particle count (annual certification vs monitoring) ISO 13485:2016 - Medical Device Quality Management Systems 4
T ISO/IEC 17065 certification scheme Help Other ISO and International Standards and European Regulations 7
A Does ISO 9001:2015 cover all the requirements of ISO 10012:2003? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
G Logistic organization and controls - IATF/ISO 9001 audit Nonconformance and Corrective Action 2
R Identify Medical Device characterstics as Annex C of ISO 14971 Risk Management ISO 14971 - Medical Device Risk Management 5
A ISO 17021-1:2015 toolkit General Auditing Discussions 2
N ISO 19011:2018 - 5.4.2 "...audit program should engage in appropriate continual development..." Training - Internal, External, Online and Distance Learning 4
P ISO 13485:2016 MDSAP Certification Fee Survey ISO 13485:2016 - Medical Device Quality Management Systems 6
A ISO 14971 PFMEA Manufacturing Risk ISO 14971 - Medical Device Risk Management 2
J Scope of ISO 9001 clause 10.2 in the product life cycle ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
C SOP Template needed for ISO 13485 6.3 Infrastructure ISO 13485:2016 - Medical Device Quality Management Systems 9
T ISO 13485 8.3 - Non-Conforming Materials - on-line rework or part of process? ISO 13485:2016 - Medical Device Quality Management Systems 11
T ISO 9001 8.5.2. - Identification and traceability to Identify Outputs - Services ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
T Outsourced process in ISO 45001 Occupational Health & Safety Management Standards 2
K Overall residual risk according to ISO 14971:2019 ISO 14971 - Medical Device Risk Management 5
M Gap analysis on ISO 14971:2019 with previous revision ISO 14971 - Medical Device Risk Management 3
T ISO 9001:2015 - Small Shop ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
T ISO 17025:2017 requirement 5.7.b. about maintenance the integrity of the management system ISO 17025 related Discussions 1

Similar threads

Top Bottom