Tool for Measuring - Do I have to do more than one Gage R&R for the PPAP?

Elsmar Forum Sponsor

Miner

Forum Moderator
Staff member
Admin
#3
In short, you should perform an MSA on each unique gage on your control plan. An individual gage may also require additional MSAs if it is used for different types of features (e.g., distance between two planes, diameter, distance between two holes).

However, you may potentially group similar gages into families. See my blog post on this topic.
 
Thread starter Similar threads Forum Replies Date
M Pressure gage on a machine-monitoring tool or measuring tool? IATF 16949 - Automotive Quality Systems Standard 9
R The best inspection tool for measuring cracks - Ceramic cylinder Inspection, Prints (Drawings), Testing, Sampling and Related Topics 4
W Using a machine tool as a measuring device - ISO 9001 Clause 7.6 ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
G Tool tracebility and First calibration requirements for aerospace (AS9100) organisation AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
G APQP Scope and scale tool APQP and PPAP 2
B FAR/Prime Contractor Flow-down Tool - AS9100 AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
R Does any here use an internal auditing tool that works on different platforms? Internal Auditing 3
O Dimension Measurement Tool Recommendation General Measurement Device and Calibration Topics 21
Y Commanded life cycle management tool IEC 62304 - Medical Device Software Life Cycle Processes 1
GreatNate Excel PPAP Tracking templates or tool wanted APQP and PPAP 1
E Standards Management Tool Quality Tools, Improvement and Analysis 1
E ISO 9001:2015 - Record requirements for out of calibration tool ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 28
M PDCA as a project tool Quality Tools, Improvement and Analysis 5
M Minitab tool to evaluate PM (Preventive Maintenance) process Using Minitab Software 6
M Informational Health Canada has launched an e-Learning tool to aid in understanding the premarket regulatory requirements for medical devices in Canada Medical Device and FDA Regulations and Standards News 0
John Broomfield Workplace by Facebook - Any other organizations using this collaborative tool? Misc. Quality Assurance and Business Systems Related Topics 0
A Overkill? Using the 3L5W tool on non-conformities Nonconformance and Corrective Action 3
I Tool Control Marking Voiding Warranty AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 1
F Quality Tool box talks ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 8
D VDA 6.4 Audit checklist - Production tool suppliers VDA Standards - Germany's Automotive Standards 1
I Tool maintenance and calibration procedure - Calibrating tools/equipment AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 3
bobdoering "nds" or Number of Discriminate Samples - the Necessary Tool to Work With "ndc"! Imported Legacy Blogs 0
G Design and development of user centric audit report visualisation tool Design and Development of Products and Processes 5
G Web based tool for benchmarking audit findings Benchmarking 6
J AS9100D Clause Brain Fade - Tool was past due for Calibration AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 11
R New Tool from Omnex - IATF Gap Assessment IATF 16949 - Automotive Quality Systems Standard 0
C Upgrading from ISO 9001:2015 to IATF 16949:2016 - Anyone have a gap analysis tool? IATF 16949 - Automotive Quality Systems Standard 2
I Veeva installation and the Loader Tool Document Control Systems, Procedures, Forms and Templates 3
M IATF Tool for Leadership and Planning - 2017 IATF 16949 - Automotive Quality Systems Standard 0
Icy Mountain ISO9001:2015 & IATF 16949:2016 Gap Analysis Tool IATF 16949 - Automotive Quality Systems Standard 7
K Looking for Calibrated Tool Shadowboard Substrate Ideas AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 5
Marc SAS vs. R vs. Python: Which Tool Do Analytics Pros Prefer? Statistical Analysis Tools, Techniques and SPC 6
J Pneumatic & Electrical Torque Tool - Calibration/Verification of 'Power Tools' General Measurement Device and Calibration Topics 2
M Excel Leadtime Analysis Graphic Tool with Macros Enabled Lean in Manufacturing and Service Industries 0
D Medical Device Software Tool Validation - Compilers! IEC 62304 - Medical Device Software Life Cycle Processes 7
J What kind of Tool and Gauge in IATF 16949 Clause 8.5.1.6? IATF 16949 - Automotive Quality Systems Standard 1
J CNC Machine Tool Calibration - 6 dof Calibration Interferometers General Measurement Device and Calibration Topics 1
P Using Bugzilla as a Quality Reporting Tool Quality Assurance and Compliance Software Tools and Solutions 11
Marc Hackers unleash smart Twitter phishing tool that snags two in three users IEC 27001 - Information Security Management Systems (ISMS) 7
D Proper Tool to Measure Wall Thickness (ISO 3611 - Micrometers) Manufacturing and Related Processes 7
N Tool frequency change - Data Analysis needed Statistical Analysis Tools, Techniques and SPC 9
V What tool do you use for systemic issues? Problem Solving, Root Cause Fault and Failure Analysis 2
C Software Planning Tool for Equipment Qualifications, Process Validations Software Quality Assurance 3
M How to provide Stability Study for micron-precision tool Misc. Quality Assurance and Business Systems Related Topics 2
J Tooling Cost - As an OEM I am paying for a new tool Manufacturing and Related Processes 6
L Auditing Tool (Excel spreadsheet) for VDA 6.3 to Audit a Service Provider VDA Standards - Germany's Automotive Standards 4
O Creating a Tool to Track & Verify Mistake Proofing Devices Document Control Systems, Procedures, Forms and Templates 5
E CAPA Management Software Tool Recommendations for Small Companies Quality Assurance and Compliance Software Tools and Solutions 3
T What does Tool Validation Accomplish? Design and Development of Products and Processes 14
bobdoering Is tool wear a special cause? No... Imported Legacy Blogs 0

Similar threads

Top Bottom