Transactional Analysis Training and Test Material needed

somashekar

somashekar

Staff member
Super Moderator
#1
#1
Hi friends...
Anyone here have some good material about the subject that you can share here. The target group is assembly shop floor supervisors
:thanx:
 
Paper to QMS ad
Elsmar Forum Sponsor
somashekar

somashekar

Staff member
Super Moderator
#3
#3
Transactional analysis is about the assessment of human behavior in interpersonal interaction classified as ADULT / PARENT / CHILD type of personality. There are tests which indicates what interpersonal behavior mix one demonstrates.

The outcome expected therefore is to help identify such behavior and change communication style to effective interactions.
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
A Insights on Transactional Ticket Audits such Parameters, Weighting Points, etc ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 2
D Examples of Process Map for a Transactional Process like Order Entry Process Maps, Process Mapping and Turtle Diagrams 3
6 Transactional six sigma project needed - Working on my black belt - Detroit Six Sigma 3
A Transactional six sigma - Is anyone working in the field of transactional 6 sigma? Professional Certifications and Degrees 3
Q Looking for a 5 WHYs Example - 5 Why for a service (transactional) issue Quality Tools, Improvement and Analysis 8
B FMEA and Control Plans for Transactional Processes FMEA and Control Plans 10
M MDSAP and 13485:2016 gap analysis Quality Management System (QMS) Manuals 1
M Gap analysis on ISO 14971:2019 with previous revision ISO 14971 - Medical Device Risk Management 3
M Risk Analysis Flow - Confusion between ISO 14971 and IEC 62304 IEC 62304 - Medical Device Software Life Cycle Processes 8
R ECG Risk Analysis Standards ISO 14971 - Medical Device Risk Management 2
T Root Cause Failure Analysis - Not following Customer packaging Specification Problem Solving, Root Cause Fault and Failure Analysis 5
H ISO 13485:2016 Gap Analysis by NB ISO 13485:2016 - Medical Device Quality Management Systems 7
R Capability analysis - What is going on this chart? Manufacturing and Related Processes 15
adir88 Documenting Risk Control Option Analysis ISO 14971 - Medical Device Risk Management 8
MrTetris Should potential bugs be considered in software risk analysis? ISO 14971 - Medical Device Risk Management 5
K Analysis variation among the lots during cpk calculation. Design and Development of Products and Processes 1
DuncanGibbons Best practice for identifying "items" of parts for DFMEA analysis AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
J Looking for a EU MDR Gap Analysis template EU Medical Device Regulations 4
B Has anyone done an IEC 60601-1 gap analysis to IEC 60335? Medical Device and FDA Regulations and Standards News 4
M What is PESTLE Analysis and is it mandatory? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 4
I Root Cause Analysis as Training ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 10
0 Interesting Discussion Analysis of half normal distribution in minitab Using Minitab Software 11
M IATF 16949 (6.1.1 - Planning and Risk Analysis for a remote site) Process Maps, Process Mapping and Turtle Diagrams 5
D Risk Analysis & Technical File - What detail goes in the Risk Management Report ISO 14971 - Medical Device Risk Management 5
F Struggling with a root cause analysis - Customer Returns - Escape issue Problem Solving, Root Cause Fault and Failure Analysis 15
M 10993-11 vs 2006 gap analysis Other Medical Device Related Standards 2
M How to complete structure Analysis and Function analysis sections' columns of AIAG-VDA DFMEA form FMEA and Control Plans 0
Nicole Desouza AS 9100 Rev D Gap Analysis AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
M An example of risk analysis of class I MD ISO 14971 - Medical Device Risk Management 36
R AS9100 REV D gap analysis matrix AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 6
F ISO 17025 8.6.2 Customer Feedback Analysis ISO 17025 related Discussions 5
M MDR Medical devices Gap analysis ISO 13485:2016 - Medical Device Quality Management Systems 2
L UDI Requirments Gap Analysis - EU MDR vs FDA CFR EU Medical Device Regulations 8
A Statistical Analysis - Check if these organisms at different concentrations affect the growth of wheat seedlings Using Minitab Software 4
H Graphical analysis of results - Confidence level bands nomenclature Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 2
R How to properly use Survival Analysis to predict time to machine failure Reliability Analysis - Predictions, Testing and Standards 0
I Root Cause Analysis when someone simply stops performing a task? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 16
Emran.mi Measurement system analysis - Can you help me about implementation MSA for CMM device Manufacturing and Related Processes 2
N Should it even be on the hazard analysis (software)? FMEA and Control Plans 2
L ISO 13485:2016 Clause 8.4 - Analysis of Audit Observations ISO 13485:2016 - Medical Device Quality Management Systems 8
J ISO 9001:2015 Excel Gap Analysis wanted ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 7
M Reliability Testing - Weibull Analysis Help Reliability Analysis - Predictions, Testing and Standards 4
I Functional Safety Analysis/Report Example IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
A Acceptance p-value for linearity and bias analysis in minitab results Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 0
T Risk analysis of QMS software - Validating software we use for QMS ISO 13485:2016 - Medical Device Quality Management Systems 5
Y Post Market Surveillance Indicators and Analysis method EU Medical Device Regulations 1
qualprod ISO 9001 Clause 9.1 - Monitoring measurement analysis and evaluation ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 6
M Data analysis Design of Experiments Using Minitab Software 3
N Justifications for not performing MSA (Measurement System Analysis) Gage R&R (GR&R) and MSA (Measurement Systems Analysis) 6
V Protocol, report or SOP for threshold analysis? Human Factors and Ergonomics in Engineering 0

Similar threads

Top Bottom