Transformer Oil Analysis - Help with a a Duval's Triangle

D

djaphro

#1
Hello,

We operate and maintain a few Oil filled transformers and lately have experienced some indications of Partial Discharge in the Oil analysis results.
Can someone help me with a Duval's Triangle - probably a template to transfer the values from test reports and carry out an analysis.

Thank you.
 
Elsmar Forum Sponsor

Steve Prevette

Deming Disciple
Leader
Super Moderator
#4
I deal quite a bit with inspection data, but had not heard of Duval's triangle. A quick search around the internet did show me what it is. Are you looking for a way to calculate your location in the triangle? Seems like it should be do-able in Excel.

Drop me a personal email through the Cove if you are looking for someone to set something like that up.
 
Thread starter Similar threads Forum Replies Date
B Transformer Requirements - IEC 60601-1 vs. IEC 61558-2-15 IEC 60601 - Medical Electrical Equipment Safety Standards Series 0
G Where to buy Medical Grade Transformer IEC 60601 - Medical Electrical Equipment Safety Standards Series 12
N Triple insulated wire for transformer isolation IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
E Creepage distance accross insulation of step up transformer EU Medical Device Regulations 2
A MOPs needed after Isolation Transformer IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
E Transformer Overload Test - Need help IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
J Transformer Compliance Testing, overheat then humidity treat, then dielectric test? IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
alonFAI Gaps between the Bobbin and the Ferrite Core in a Transformer Manufacturing and Related Processes 1
R Question on IEC 60601 clause 15.5.1.1 (transformer overheating) IEC 60601 - Medical Electrical Equipment Safety Standards Series 1
S How to implement protection for multi-winding transformer? IEC 60601 - Medical Electrical Equipment Safety Standards Series 3
P PSU Transformer Tests Approved to IEC 60601 IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
W Supply Voltage Condition for Transformer O/L and S/C (open & short circuit) testing IEC 60601 - Medical Electrical Equipment Safety Standards Series 4
P Test Voltages for a Pulse Transformer used to Isolate the Patient Connection IEC 60601 - Medical Electrical Equipment Safety Standards Series 11
L Quality Assurance Manual for Transformer Oils Service Industry Specific Topics 2
E Ethernet Isolation Transformer for Medical Grade PCB IEC 60601 - Medical Electrical Equipment Safety Standards Series 9
S How to overload a linear transformer with multiple protective devices IEC 60601 - Medical Electrical Equipment Safety Standards Series 12
R How to determine the reference voltage for three-phase transformer? IEC 60601 - Medical Electrical Equipment Safety Standards Series 12
G 50 Turn Transformer Coil Calibration Technical question General Measurement Device and Calibration Topics 10
D UL Certified Isolation Transformer Various Other Specifications, Standards, and related Requirements 3
L looking for a forum related to motor/transformer lamination manufacturing Book, Video, Blog and Web Site Reviews and Recommendations 2
G What differentiates a "bridging transformer" from an ordinary "isolation transformer" General Measurement Device and Calibration Topics 5
B Industrial RX inspection of welds (Oil&Gas industry) Reliability Analysis - Predictions, Testing and Standards 0
Marc BP Slashes Its Oil Exploration Team by 85%, Starts Switching to Renewables World News 12
GURU SDI Rust preventive oil mixed with kerosene Problem Solving, Root Cause Fault and Failure Analysis 2
Crimpshrine13 Analysis of Cold Forming Lubrication Oil Reliability Analysis - Predictions, Testing and Standards 1
S MDS (Material Declaration Sheet) Reporting for Volatile Solvent in oil RoHS, REACH, ELV, IMDS and Restricted Substances 1
E Lean Manufacturing in Oil & Gas Industry Lean in Manufacturing and Service Industries 4
L Oil Field Bearing Production PPM Standard Benchmarking 2
J Back to the Cove - Oil and Gas Industry Oil and Gas Industry Standards and Regulations 1
Johnnymo62 What oil do I use for our Starrett 3814 Hardness Tester? General Measurement Device and Calibration Topics 1
J External Laboratory in ISO/TS 16949 - Maintenance oil samples IATF 16949 - Automotive Quality Systems Standard 3
B Oil and Gas Engineering Consultancy Auditing Internal Auditing 3
M Supplier PPAP for Interim Materials - Oil to test functionality of finished product IATF 16949 - Automotive Quality Systems Standard 4
R How to Inspect the Weld Strength of High Pressure Vessel & Oil Pipe Line Inspection, Prints (Drawings), Testing, Sampling and Related Topics 2
M Identification and Traceability for Oil & Gas Production ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 9
AnaMariaVR2 Widening Battle: Middle East Cyberattacks Target Oil Producers and U.S. Banks World News 0
M Shelf Life of Mineral Oil USP (put on cutting burrs before shipping) Manufacturing and Related Processes 19
W Customer Satisfaction Surveys in Oil Industry Customer Complaints 8
W Applying ISO 9001 Clause 7.3 in Special Case - Oil Refinery ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
D Help with ISO 9001 Implementation in Oil Industry ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 12
L API Q2 Specification - QMS (Oil & Gas Industry Aftermarket) Oil and Gas Industry Standards and Regulations 73
Marc Fresh oil slicks forming over Deepwater Horizon site World News 2
N Customer Waste Management Responsibility - Packing Materials & Conservation Oil? Miscellaneous Environmental Standards and EMS Related Discussions 4
C Change Control Plan/Procedure for Slickline/Wireline Services (Oil Field) Quality Manager and Management Related Issues 1
A Transocean Execs Get Bonuses after ?Best Year in Safety,? Despite Gulf Oil Disaster. World News 1
T Uncertainty Measurement on Kinematic Viscosity of Fuel Oil General Measurement Device and Calibration Topics 1
L Customer Inquiry - Graph showing the expansion of oil (mm) at different temperatures Service Industry Specific Topics 5
T Skip Lot Sampling Plans (SkSP) - Oil for Trans Fatty Acid Content Inspection, Prints (Drawings), Testing, Sampling and Related Topics 6
S Penetrant, Type I, Method A - ASTM-E1417 (Content of oil/grease in cleaning water) Manufacturing and Related Processes 1
T Clause for Maintenance - Periodic Maintenance Activity (Oil change) Internal Auditing 4

Similar threads

Top Bottom