SBS - The best value in QMS software

TS 16949 Clause 4.1 - Process and methodologies - Small software company 15 employees

S

SuRiVs

#1
#1
Process and methodologies

Hello again! First of all I would like to thank avery reply I got, they have been invredible helpfull. I've been reading quite a few articles about the process aproach and have a question.

I'm working in a small company 15 employees) that developes software and also manages software projects. We have a methodology regarding how to develop systems and how to manage software projects. I was wondering wether when complying with 4.1 you could just refer to this methology.

Best regards
Martin
 
Standard Work Instruction Software by Dozuki
Elsmar Forum Sponsor
Randy

Randy

Super Moderator
#2
#2
Why not? Remember in order to meet the requirements of 4.1 you need to do everything else (with exclusions if allowed). What you are describing is part of Product Realization which falls in the Caluse 7 area.
 
howste

howste

Thaumaturge
Super Moderator
#3
#3
Yes, this sounds like you are describing how you meet the requirements of 7.3.1 (and the rest of 7.3). In my opinion the requirements of 4.1 are mostly all met through other requirements covered in the rest of the standard anyway...
 
You must log in or register to reply here.
Thread starter Similar threads Forum Replies Date
N Looking for input on the attached Process / IATF 16949 Clause Matrix IATF 16949 - Automotive Quality Systems Standard 4
P Interesting Discussion IATF 16949:2016 Clause 9.2.2.3 and Layered Process Audits IATF 16949 - Automotive Quality Systems Standard 18
M IATF 16949 Clause 8.3.5.2 sub-clause (l) - Process maintainability requirements IATF 16949 - Automotive Quality Systems Standard 15
A Escalation Process - IATF 16949 Clause 4.4.1.2 IATF 16949 - Automotive Quality Systems Standard 11
B IATF 16949 Clause 8.5.6.1.1 (Temporary Process Control Change) IATF 16949 - Automotive Quality Systems Standard 24
T Temporary Change of Process Controls - IATF 16949 Clause 8.5.5.1.1 IATF 16949 - Automotive Quality Systems Standard 16
B IATF 16949 Clause 8.4.1.2 - Supplier Selection Process - Service Providers IATF 16949 - Automotive Quality Systems Standard 13
M Compliance with IATF 16949 Clause 8.3.4.4 Product Approval Process IATF 16949 - Automotive Quality Systems Standard 2
P IATF 16949 Clause 8.5.6.1.1 - Temporary Change of Process Controls IATF 16949 - Automotive Quality Systems Standard 21
J How to understand IATF 16949 Clause 8.5.6.1.1 - Process Controls IATF 16949 - Automotive Quality Systems Standard 2
M Process standards - TS 16949 clause 7.6.3.1 IATF 16949 - Automotive Quality Systems Standard 2
S TS 16949 Clause 4.2.3.1 - Process to assure timely review - Two weeks IATF 16949 - Automotive Quality Systems Standard 2
E TS 16949 Clause 7.1.1 Process Planning-Operation Sheet Example wanted Document Control Systems, Procedures, Forms and Templates 5
R TS 16949 Clause 5.1.1 Process Efficiency IATF 16949 - Automotive Quality Systems Standard 4
P Prototype Build Process per TS 16949 Clause 7.3.6.2 and APQP IATF 16949 - Automotive Quality Systems Standard 5
M Manufacturing Process Design and Development Review - TS 16949 Clause 7.3.4 IATF 16949 - Automotive Quality Systems Standard 12
P Process Measures for Every Process - TS 16949 Clause 5.1.1 IATF 16949 - Automotive Quality Systems Standard 16
J LPAs (Layered Process Audits) and TS 16949 Clause 8.2.2.2 - Quick Question Process Audits and Layered Process Audits 20
T TS 16949 Clause 7.4 - Purchasing Process - Notes 1 and 2 - Mergers and acquisitions IATF 16949 - Automotive Quality Systems Standard 7
S TS 16949 Clause 4.1: COPs (Customer Oriented Processes) and Process Flow IATF 16949 - Automotive Quality Systems Standard 14
P TS 16949 Clause 8.2.3.1 - Maintaining Process Capability IATF 16949 - Automotive Quality Systems Standard 9
earl62 IATF 16949 Clause 9.1.1.1 - What is the batch conformance to specification method? IATF 16949 - Automotive Quality Systems Standard 3
P IATF 16949 Clause 8.4.2.3 - Justification for non-certified suppliers IATF 16949 - Automotive Quality Systems Standard 14
M IATF 16949:2016 clause 8.4.2.3 - We don't have ISO 9001:2015 certificate IATF 16949 - Automotive Quality Systems Standard 26
R Material safety data sheet (MSDS) related clause in IATF 16949 manual IATF 16949 - Automotive Quality Systems Standard 17
R IATF 16949 Clause 8.5.1.6 a) maintenance and repair facilities - Production tooling management and personnel IATF 16949 - Automotive Quality Systems Standard 4
QChas IATF 16949 Clause 8.5.1.2 - C -Standardized Work IATF 16949 - Automotive Quality Systems Standard 1
R IATF 16949 Clause 6.1.2.1 - Lessons Learned and Risk Analysis IATF 16949 - Automotive Quality Systems Standard 6
L IATF 16949 Clause 9.2.2.2 Quality Management System Audit IATF 16949 - Automotive Quality Systems Standard 9
H IATF 16949 Clause 9.2.2.2 Audit System / CSR IATF 16949 - Automotive Quality Systems Standard 1
B IATF 16949 clause 7.1.5.1.1 - Statistical studies shall be conducted IATF 16949 - Automotive Quality Systems Standard 3
M Reference to IATF 16949 clause 8.4.3 in clause 8.3.4.4, Is it right? IATF 16949 - Automotive Quality Systems Standard 1
J IATF 16949 Clause 9.3.2.1 - How to understand "measures" IATF 16949 - Automotive Quality Systems Standard 4
J How to address IATF 16949 clause 5.1.1.1 in my Quality Manual IATF 16949 - Automotive Quality Systems Standard 6
B IATF 16949 clause 8.3.4.3 Prototype programme IATF 16949 - Automotive Quality Systems Standard 0
DeeDeeM IATF 16949 - Clause 8.5.2 Identification and Traceability IATF 16949 - Automotive Quality Systems Standard 7
W IATF 16949 Clause 6.1.1 - My first Major NCR (Management Review) IATF 16949 - Automotive Quality Systems Standard 57
E IATF 16949 Clause of 8.4.3 - Approvals - Can you explain to me IATF 16949 - Automotive Quality Systems Standard 1
B IATF 16949 Clause 9.2.2.2 - Which QMS Processes are Included IATF 16949 - Automotive Quality Systems Standard 1
J What are sample documents of IATF 16949 Clause 8.6.4 a? IATF 16949 - Automotive Quality Systems Standard 2
S IATF 16949 Clause 8.3.3.3 - Documentation of all Special Characteristics in Drawings IATF 16949 - Automotive Quality Systems Standard 2
B IATF 16949 Section Clause 8.3.4.1 - Monitoring - Design and Development Input(s) IATF 16949 - Automotive Quality Systems Standard 3
B IATF 16949 Clause 8.6.2 - Layout Inspection and Functional Testing IATF 16949 - Automotive Quality Systems Standard 13
B IATF 16949 Clause 9.3.2.1 - Management Review Inputs IATF 16949 - Automotive Quality Systems Standard 1
T Customer Authorization for Concession - IATF 16949 Clause 8.5.1.1 IATF 16949 - Automotive Quality Systems Standard 3
W IATF 16949 Clause 8.4.2.4.1 Second Party Audits (Supplier Management) IATF 16949 - Automotive Quality Systems Standard 45
T Record Retention Requirements - IATF 16949 Clause 7.5.3.2.1 Records and Data - Quality, Legal and Other Evidence 15
J IATF 16949 Clause 8.7.1.7 Nonconforming Product Disposition - Scrap Rendered Unusable IATF 16949 - Automotive Quality Systems Standard 64
M IATF 16949 Clause 4.4.1.2 - Product Safety - Concept of the Title IATF 16949 - Automotive Quality Systems Standard 4
M IATF 16949 Clause 7.1.5.1.1 - What are "inspection equipment systems"? IATF 16949 - Automotive Quality Systems Standard 4

Similar threads

Top Bottom