TS 16949 Laboratory Policy And 17025

I

IGORTS

#1
We are going to have en audit of ISO-TS 16949, and I need your help, I´m needing a quality policy and Manual of the LAB according the requirements of TS 16949, so could someone give me one, in order to guide my job, because I´m lost.

Thank you in advance

The effort of each one is the development of all.
 
Elsmar Forum Sponsor
D

D.Scott

#2
Igorts

Welcome to the Cove.

Our lab has been accredited by A2LA and is based on 17025 requirements but does not address 16949. We are a QS-9000 company and have not converted.

Although I am willing to share my manual with you if you think it will help, I caution you on relying on someone else's manual. You need to understand the requirements and set up the manual and procedures in a way that will reflect your lab. Simply having the manual won't help you when it comes to actually maintaining your lab. I can see where a copy of mine could help by giving you some ideas in formating and approach.

I would suggest you contact a local consultant or get to some good training classes on the subject.

As I say, my manual addresses QS-9000, A2LA and the Fastener Act. THERE ARE A LOT OF THINGS THAT MAY NOT APPLY TO YOUR LAB. If you feel it will help, let me know and I will e-mail a copy (64 pages in MSWord).

Dave
 
I

IGORTS

#4
DAVE

Thank you for your reply,

I appreciate a lot your impresions and knowledgement about this matter. I think that the worst way of resolve my doubts is contacting a local consultant, because we need only to get a starting-point for developping our procedures( formating and aproach ).

When I posted this question I only wanted to know the structure of the procedures and the most used LAB policy in order to aply the into my organization.

So, if you consider that your Manual will help me , please e-mail it me to the following e-adress: [email protected]

On the contrary, thank you very much for your kind reply.

REGARDS
IGORTS

Ahhh concerning the trainning I´m completly agree with you, but it´s impossible following the auto-trainning concerted in the Company where I work.
Oh... I´m sorry for my english , it is not all the correct I wish.
 
A

Al Dyer

#5
This is a place for everybody, while language may slow us down a bit it is not an issue, your English is fine and better than many posts I have seen! Including Mine!

Welcome to the cove and keep posting!:bigwave:
 
K

Ken K

#6
Excellent advice Dave.

I think we were all in the same situation when first confronted by QS. Where in the world does one start to put together a Lab Manual and Lab Scope.
But once started, you start to invision how the lab will work and the policies it will adopt. It was a pain in the butt when we began the task but a real sense of accomplishment when it was finished and approved.
I think you will enjoy the same feeling when it comes together for you.

Good luck!
 
I

IGORTS

#7
thanks

Thank you ( everybody )

Do not hesitate if you had any question, I will post, of couse, I think that these forums are the High School of the future, where we can help someone and we are helped.

:biglaugh:
:agree:
 
D

D.Scott

#8
Your English is great!

If you want a real laugh, you should see my Spanish :ko:

Keep in touch and let us know how you do with your audit.

Dave
 

Atul Khandekar

Quite Involved in Discussions
#10
Learning

I think that these forums are the High School of the future, where we can help someone and we are helped.
Sure IGORTS, I'm learning both - Quality and English...:)

You'll find very able Friends, Philosophers and Guides here for both.
-Atul
 
Last edited:
Thread starter Similar threads Forum Replies Date
N IATF 16949:2016 7.1.5.3.2 External Laboratory - How to approve the Testing Laboratory without accreditation scope IATF 16949 - Automotive Quality Systems Standard 2
Casana IATF 16949 7.1.5.3.2 External Laboratory - On Site Calibration IATF 16949 - Automotive Quality Systems Standard 8
N IATF 16949 7.1.5.3.2 External Laboratory - Calibration of Nikon machine in factory IATF 16949 - Automotive Quality Systems Standard 24
B IATF 16949 7.1.5.3.2 FAQ #7 Audit Finding - External Calibration Laboratory IATF 16949 - Automotive Quality Systems Standard 7
sswaim IATF 16949 7.1.5.3.2 External Calibration Laboratory Requirelents IATF 16949 - Automotive Quality Systems Standard 15
J IATF 16949 Calibration Laboratory Scope IATF 16949 - Automotive Quality Systems Standard 20
H Internal laboratory scope requirements - IATF 16949 Cl. 7.1.5.3.1 IATF 16949 - Automotive Quality Systems Standard 1
B IATF 16949 - 7.1.5.3.1 Internal calibration laboratory requirements IATF 16949 - Automotive Quality Systems Standard 9
B IATF 16949 Cl. 7.1.5.3.2 - External Laboratory Sub-Supplier Requirements IATF 16949 - Automotive Quality Systems Standard 2
Casana What is an Internal Laboratory - TS 16949 Clause 7.6.3.1 IATF 16949 - Automotive Quality Systems Standard 1
S Auditing TS 16949 Cl. 7.6.3.1 - Internal Calibration Laboratory Requirements IATF 16949 - Automotive Quality Systems Standard 8
J TS 16949 requirements for an internal laboratory equipment list IATF 16949 - Automotive Quality Systems Standard 2
J External Laboratory in ISO/TS 16949 - Maintenance oil samples IATF 16949 - Automotive Quality Systems Standard 3
Q TS 16949 Manufacturing Site uses ISO 9001 Corporate Laboratory IATF 16949 - Automotive Quality Systems Standard 2
M TS 16949 Clause 7.6.3.1 - Internal Laboratory - need clarification IATF 16949 - Automotive Quality Systems Standard 3
D ISO/TS 16949 Stage 2 Audit Nonconformance Against 7.6.3.1 Laboratory Scope IATF 16949 - Automotive Quality Systems Standard 8
K TS 16949 Clause 7.6.3.1 - Internal Laboratory Requirements IATF 16949 - Automotive Quality Systems Standard 2
Mikey324 ISO/TS 16949 Clause 7.6.3.1 - Internal Laboratory - Requirements IATF 16949 - Automotive Quality Systems Standard 19
N ISO 17025 External Calibration Laboratory Requirements within ISO/TS 16949 ISO 17025 related Discussions 28
P ISO/TS 16949:2002 - Internal Laboratory Scope - Post good example please! IATF 16949 - Automotive Quality Systems Standard 5
I TS 16949 Audit Minor non conformance - Outside Calibration Laboratory IATF 16949 - Automotive Quality Systems Standard 15
D Does TS 16949 require us to have an internal laboratory? IATF 16949 - Automotive Quality Systems Standard 7
Icy Mountain ISO/TS 16949 Compliant Calibration Method - Laboratory Calibration Levels IATF 16949 - Automotive Quality Systems Standard 13
T Second Tier Laboratory Requirements for TS 16949 IATF 16949 - Automotive Quality Systems Standard 3
H Calibration Laboratory Accreditation Bodies - Who is legitimate? (TS 16949 company) General Measurement Device and Calibration Topics 11
S Internal laboratory requirements and technician skills - TS 16949 para. 7.6.3.1 General Measurement Device and Calibration Topics 1
J Laboratory Accreditations - TS 16949 to ISO/IEC Guide 25 or national equivalent? General Measurement Device and Calibration Topics 2
G TS 16949 - Laboratory Scope - Injection Molding IATF 16949 - Automotive Quality Systems Standard 12
J ISO/TS 16949 audit nonconformity from Auditor on laboratory scope General Measurement Device and Calibration Topics 5
T ISO 17025 and ISO/TS-16949 Clause 7.6.3.1 Requirements - In-House Laboratory ISO 17025 related Discussions 2
T TS 16949 Para. 7.6.3.1 - Internal Laboratory - Defined scope that includes capability IATF 16949 - Automotive Quality Systems Standard 11
J Laboratory Scope for TS 16949 Internal Lab General Measurement Device and Calibration Topics 1
Sean Kelley TS 16949 certification and recently purchased offsite laboratory IATF 16949 - Automotive Quality Systems Standard 7
K TS 16949 (Ford, DCX, Toyota) Audit of an ISO 17025 (GM Only) In-House Laboratory ISO 17025 related Discussions 2
B FCA US Customer Specific IATF 16949- Critical Characteristics 8.6.2 Customer and Company Specific Requirements 0
B IATF 16949 News Six month extension on all valid IATF 16949 certs IATF 16949 - Automotive Quality Systems Standard 10
earl62 IATF 16949 Clause 9.1.1.1 - What is the batch conformance to specification method? IATF 16949 - Automotive Quality Systems Standard 3
B FCA US IATF 16949 Customer Requirements updates Customer and Company Specific Requirements 3
S Can assembly manufacturing sub-supplier be certified IATF 16949? IATF 16949 - Automotive Quality Systems Standard 6
D IATF 16949 Requirement for CMMI in a Global Company Elsmar Cove Forum Suggestions, Complaints, Problems and Bug Reports 0
M Tips on preparing for IATF 16949 Internal Lead Auditor exam Manufacturing and Related Processes 1
A IATF 16949 4.3.1 - Determining the scope of the quality management system - supplemental IATF 16949 - Automotive Quality Systems Standard 9
S Definition of "worldwide" in view of IATF 16949 and Product conformity IATF 16949 - Automotive Quality Systems Standard 3
R Where does IATF 16949 address Process mapping? IATF 16949 - Automotive Quality Systems Standard 3
A Document "Correspondence IATF 16949 vs ISO13485" available? IATF 16949 - Automotive Quality Systems Standard 0
H Remote product audits in Coivd-19 - IATF 16949 9.2.2.4 IATF 16949 - Automotive Quality Systems Standard 3
S IATF 16949 - Partial traceability of Aftermarket products IATF 16949 - Automotive Quality Systems Standard 5
M IATF 16949 8.5.1.3 Verification of job set-ups - Do we need secondary check? IATF 16949 - Automotive Quality Systems Standard 7
C Industrial scales and MSA (IATF 16949 requirement 7.1.5.1.1) IATF 16949 - Automotive Quality Systems Standard 30
V Generic IATF 16949 Audit Checklist wanted IATF 16949 - Automotive Quality Systems Standard 3

Similar threads

Top Bottom