TS16949-Requirements of 5.6 Management Review

millie6901

Registered Visitor
#1
Hi ! All,

need advised from you all, i need to come out a conculsion from the managment review by the top management. Any example ..or any idea how to capture it ?:(
 
Elsmar Forum Sponsor

antoine.dias

Quite Involved in Discussions
#2
Re: 5.6 Management Review

In the mgt. review management is supposed to look at the effectiveness of the system - and for ISO TS all requirements of the system and its performance trends.

Conclusions can be :

1) Activities and processes are effective - No corrective actions necessary - Only improvement opportunities to be checked.

2) Activities and or processes are not effective enough - You have to come up with an action plan with activities, responsibilities and target dates TO IMPROVE EFFECTIVENESS.

Both 1) and 2) should be clear in the report.

Best regards,

Antoine
 
Last edited:

harry

Super Moderator
#3
Re: 5.6 Management Review

Hi ! All,

need advised from you all, i need to come out a conculsion from the managment review by the top management. Any example ..or any idea how to capture it ?:(
Hi Millie,

I had a hard time trying to understand your question. You don't come out with just 'a' conclusion from the management review. Rather it's a conclusion for each item in the input which then becomes the output.

How to do it? - refer to Antoine's good response.
 

Coury Ferguson

Moderator here to help
Staff member
Super Moderator
#4
Re: 5.6 Management Review

Hi ! All,

need advised from you all, i need to come out a conculsion from the managment review by the top management. Any example ..or any idea how to capture it ?:(
I guess my first question is: Which Standard are you talking about?

This thread is posted in the TS16949 forum so I assume that you are talking about TS? If, this question is not regarding the requirements of TS16949, and about ISO9001:2000, I will move this thread to the ISO9001:2000 forum.

Regarding ISO9001:2000: The Management Review Cycles (meetings) are used to identify improvements, the health and so on, in the Quality Management System. Without any Action Items there would be no conclusion, in my opinion, (unless the QMS is "perfect", which in most cases the QMS can always be improved). Now, I believe ISO9001:2000 does identify certain requirements that need to be addressed.

The way you (your company) wants to document the results are really incidental. Any type of document can be used. ISO9001:2000, does not say what type of documents need to be used, only that there is some type of "objective evidence" of the review and any actions taken.

You may also want to look at the bottom of the threads page and you will see that there are other questions that have been asked, and most likely, answered. They might also give you some idea.

I hope this helps.
 
Last edited:
Thread starter Similar threads Forum Replies Date
B TS16949 Section 8.2.2.3 Product Audit - Requirements for various Customers IATF 16949 - Automotive Quality Systems Standard 10
T TS16949 Process Design Requirements IATF 16949 - Automotive Quality Systems Standard 2
L TS16949 Work Instruction Requirements IATF 16949 - Automotive Quality Systems Standard 7
D TS16949 requirements for for Directed Buy Customers IATF 16949 - Automotive Quality Systems Standard 5
B Meeting the requirements of ISO/TS16949 Clause 6.2.2.3 IATF 16949 - Automotive Quality Systems Standard 4
M Process Records requirements for TS16949 standard IATF 16949 - Automotive Quality Systems Standard 6
R TS16949 requirements for Motorcycle OEM Parts Suppliers (Batteries) IATF 16949 - Automotive Quality Systems Standard 1
L Product=Service in ISO 9001 and ISO 9001 Requirements vs. TS16949 Requirements IATF 16949 - Automotive Quality Systems Standard 2
BHobbs_Busche ISO/TS16949:2009 - MSA requirements for common gages IATF 16949 - Automotive Quality Systems Standard 5
C ISO/TS16949 Requirements for Internal Audit Trainer IATF 16949 - Automotive Quality Systems Standard 10
A Audit NC - Not identifying our Customer Specific Requirements - TS16949 (7.3.6.3) General Auditing Discussions 7
2 AIAG or TS16949 Gage ID Documentation Requirements FMEA and Control Plans 4
B TS16949 Annual PPAP Submission Requirements for Ford and Chrysler Parts IATF 16949 - Automotive Quality Systems Standard 2
M TS16949 and Supplier Certification Requirements Supplier Quality Assurance and other Supplier Issues 4
C John Deere Supplier - Are all the requirements of TS16949 necessary? IATF 16949 - Automotive Quality Systems Standard 4
K New 8D format for TS16949 CSR (Customer Specific Requirements)? IATF 16949 - Automotive Quality Systems Standard 5
W Would taking the 14001 Lead Auditor Class & passing, meet the requirements TS16949? IATF 16949 - Automotive Quality Systems Standard 6
R TS16949 External Calibration Laboratory Requirements - Thermocouples IATF 16949 - Automotive Quality Systems Standard 7
H Exclusion of Design and Development Requirements (7.3 & sub-clauses) in TS16949? Design and Development of Products and Processes 9
Manix TS16949 Training Requirements - Basic introduction to the standard vs. Lead Auditor Training - Internal, External, Online and Distance Learning 8
N AS9100 Internal Auditor Requirements vs. TS16949 Internal Auditor Requirements Internal Auditing 8
K How can I demonstrate meeting 5.6.2.1 and 6.3.1 of ISO/TS16949 requirements? IATF 16949 - Automotive Quality Systems Standard 2
P ISO/TS16949 Lead Auditor requirements - Transitioning from QS9000 to ISO/TS16949 General Auditing Discussions 6
K Trainer Requirements for Internal Company TS16949 Training Course for Employees? Training - Internal, External, Online and Distance Learning 3
R GM revised its Specific Requirements for TS16949 and PPAP 4th, effective immediately Customer and Company Specific Requirements 4
B Product Testing/Calibration with reference to TS16949 requirements General Measurement Device and Calibration Topics 0
C Systems Requirements vs. Process Requirements for TS16949 IATF 16949 - Automotive Quality Systems Standard 5
P TS16949 Section 4.2 Documentation Requirements - Multiple Locations Document Control Systems, Procedures, Forms and Templates 6
Z ISO / TS16949 Supplier requirements (Certification) Supplier Quality Assurance and other Supplier Issues 20
S What are TS16949 requirements regarding supplier development for tooling suppliers Supplier Quality Assurance and other Supplier Issues 5
S Internal Audit requirements for TS16949 Internal Auditing 1
C QS9000 TE vs. TS16949 - Registration Applicability and Requirements Conflicts IATF 16949 - Automotive Quality Systems Standard 3
K Applicability of requirements of entire section 7.4 of TS16949:2002 IATF 16949 - Automotive Quality Systems Standard 2
K Special Requirements for Special Processes - HT 2005 (TS16949:2002) IATF 16949 - Automotive Quality Systems Standard 1
Z TSA Requirements for ISO/TS16949? IATF 16949 - Automotive Quality Systems Standard 1
S ISO14001 and TS16949 "Compatibility" vs. Audit Day Requirements IATF 16949 - Automotive Quality Systems Standard 7
H Ford Customer-Specific Requirements for use with ISO/TS16949:2002 Customer and Company Specific Requirements 0
N TS16949:2002 CSR (Customer Specific Requirements) Questions Customer and Company Specific Requirements 6
H Does Powerway's APQP - PPAP fulfill TS16949 document and data control requirements? Customer and Company Specific Requirements 2
R AIAG's TS16949 Auditor requirements and customer-specific requirements General Auditing Discussions 9
T PPAP differences between TS16949 and VDA APQP and PPAP 1
G Is ISO/TS16949 Extension Available? IATF 16949 - Automotive Quality Systems Standard 3
B ISO/TS16949 In-House Non-Product Laboratory IATF 16949 - Automotive Quality Systems Standard 3
M ISO/TS16949 to IATF 16949:2016 Gap Analysis Questions IATF 16949 - Automotive Quality Systems Standard 2
tony wardle Lean and TS16949 - Integration Lean in Manufacturing and Service Industries 4
T TS16949 - What extras over the ISO 9001:2008? Gap Analysis IATF 16949 - Automotive Quality Systems Standard 5
B Checklist for ISO/TS16949 for review and comment IATF 16949 - Automotive Quality Systems Standard 5
D TS16949 Annex A versus Toyota MQC's IATF 16949 - Automotive Quality Systems Standard 14
T TS16949 Lead Auditor Training Recommendations wanted Training - Internal, External, Online and Distance Learning 5
M Increase in Major TS16949 Audit Findings IATF 16949 - Automotive Quality Systems Standard 14

Similar threads

Top Bottom