Two tier objectives - ISO 14001 Objectives and Targets

P

Peter West

Hi All

Just a quickie as managed to delete the long message i just typed. I have gone through this website and the internet but not found a definite concrete answer to this. I am going through ISO 14001 objectives and targets and wondered if anyone else felt like they needed two different sets?

One based on the enviro aspects, and resolution of them and the second with a more general overview for senior members of staff i.e. to identify kWh usage, reducing the amount through doing a) b) and c).

I have 2 meetings coming up, one where i have to tell someone what they need to do, and another where i know all they want to hear is - we are aiming to reduce kWh usage by 10% this year.

Obviously the 2 are interlinked but could be presented differently.

Sorry as this is probably a stupid question:confused: but i have only started looking at ISO 14001 last week and have about 3 months to get the company ready for certification:mg:.

Thanks for all your help:thanx:
 

Randy

Super Moderator
Two different sets of what? I'm trying to figure out what you're getting at and I'm kinda lost.

An environmental objective must be related to environmental performance. I don't know what you mean by resolution of an environmental aspect and reducing kWh usage without tying it to an environmental indicator is not acceptable....a kWh has never harmed or impacted the environment...never!

There are some auditors that will accept reducing kWh's, but not me, I have to be shown the realtionship of that reduction to the evnvironment.
 

Wes Bucey

Prophet of Profit
Two different sets of what? I'm trying to figure out what you're getting at and I'm kinda lost.

An environmental objective must be related to environmental performance. I don't know what you mean by resolution of an environmental aspect and reducing kWh usage without tying it to an environmental indicator is not acceptable....a kWh has never harmed or impacted the environment...never!

There are some auditors that will accept reducing kWh's, but not me, I have to be shown the realtionship of that reduction to the evnvironment.
I suspect some folks, especially where electricity is generated by coal-burning plants, have the idea reducing kilowatt hours reduces the amount of air-polluting coal which has to be burned. Reducing the "carbon imprint" is a goal of many organizations today.
 

Randy

Super Moderator
I suspect some folks, especially where electricity is generated by coal-burning plants, have the idea reducing kilowatt hours reduces the amount of air-polluting coal which has to be burned. Reducing the "carbon imprint" is a goal of many organizations today.


They have to be specific with their objectives, guessing or hoping people will know is not acceptable. Additionally "Targets" that go along with objectives are detailed performance requirements.

Their committment is to improve environmental performance, so they have to show where that that improvement to the environment is taking place. KWh and money saved do not impact the environment.
 

Wes Bucey

Prophet of Profit
They have to be specific with their objectives, guessing or hoping people will know is not acceptable. Additionally "Targets" that go along with objectives are detailed performance requirements.

Their committment is to improve environmental performance, so they have to show where that that improvement to the environment is taking place. KWh and money saved do not impact the environment.
Oddly, the theme of another thread also involves explaining the organization intent in writing and then documenting how they have carried out the intent as an action.

{not much new since ISO 1994:notme::notme:}
 
Hi

I would like you to refer to the following sentences under section 4.3.3 of ISO-14001 (2004) Standard:

"The organization shall establish, implement and document environmental objectives and targets, at relevant functions and levels within the organization"

"The objectives and targets shall be.........consistent with the environmental policy....commitments to prevention of pollution......."

"When establishing and reviewing its objectives and targets, an organization shall take into account the legal requirements and other requirements to which the organization subscribes, and its significant environmental aspects. It shall also consider its technological options, its financial, operational and business requirements, and the views of interested parties"

To answer your question now:

1. The EMS is YOUR system; as far as you work within the framework of ISO-14001 standard, it should not matter if you classify your objectives as tier 1, tier 2 etc. The objectives need to be derived as given in the Standard and should be documented.

2. AS for as objectives related to energy (e.g. KWH), they need not necessarily be derived from Significant environmental aspects alone; if your environmental policy refers to "resource conservation" or if you identify "energy saving" among the "other requirements" (under 4.3.2 -e.g. Corporate Guideline, Kyoto Protocol etc.), still you can show links between KWH reduction and Objectives derived as guided by ISO-14001.

3. If your industry is energy intensive industry and if the source of electricity is mainly "thermal", I am sure that this will come out as a significant aspect in your analsysis of environmental impacts (indirect)..

From your question I get a feeling that you would like to show to your senior staff that there are indeed economic benefits of ISO-14001 system without exposing them to actual environmental aspects and performance. Such an approach, if it is indeed so in your case, defeats the purpose of ISO-14001 which warrants continual improvement in EMS. Your senior staff may lose interest in ISO-14001 if you don't show any economic benefits year on year. Let us not forget that ISO-14001 is for improving environmental performance of an organization continually; the economic performance arising out of the objectives and programmes is only incidental.

With best wishes,

Ramakrishnan
 
J

joshua_sx1

…well said Ramakrishnan… I like your point that “the economic performance arising out of the objectives and programmes is only incidental”, although I believe that it has always significant impact to organization for adopting ISO14001…

…anyway, I believe the key idea is - your established “measurable objectives” at your relevant functions should be consistent with your EMS policy, regardless you used two different sets (or even more than two different sets) of objectives & targets…

…well, this is only my pov, Peter West (btw nice user name, I hope you are not related with someone from North), used “kWh” as environmental indicator on their organization probably because they considered its effect like “paper” or other consumable items… it maybe indirect, but it has an impact on the environment (in the end)… the direct impact would be on the organization itself by saving a lot on operating cost… and this is already enough reason (for me) to consider it as an objective or target… and since it is somehow can contribute to the protection and improvement of environment, you can make this as one of your EMS objective… after all, it is your organization who is going to commit on it, implement, monitor its progress and measure its effectiveness… again, just only my pov… :)
 
P

Peter West

Thank you all. i think due to my lack of knowledge and experience with this i have been reading through a book and taking each and every word as gospel without really considering what is applicable to our company. This is a lot clearer and on the basis of all your advice i hope to be able to sum up our objectives and satisfy both the environmental policy as well as the requirements for becoming 14001 certified.

Thanks again for all the help.
 
T

Tybee - 2011

What I am looking for this year is a list of possible of continuous improvement projects for ISO14001/OHAS18001

We did the car pool, paper savings energy savings. Any ideas
 
Thread starter Similar threads Forum Replies Date
S Subcontractor's subcontractor - Outsourcing of Sterilization to a sub tier Supplier ISO 13485:2016 - Medical Device Quality Management Systems 11
G D/tld for tier 2 VDA Standards - Germany's Automotive Standards 3
M Signed PSW directly to End customer, Tier 1 wants their own PPAP IATF 16949 - Automotive Quality Systems Standard 6
optomist1 Survey of Tier 1 & Tier 2 suppliers APQP and PPAP 6
qualprod What tier number fits in a company producing paper labels stuck on automotive parts? IATF 16949 - Automotive Quality Systems Standard 7
J AS9104-1 Clause 18.1 (a) (b) - Organizations (contractor) shall be required to allow access to Tier 2 data AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 7
noratkhen Eligibility to get a IATF 16949 certificate for a Tier N>3 supplier? IATF 16949 - Automotive Quality Systems Standard 25
L Informational IATF 16949 certification requirement for Tier 2/Tier 3 Suppliers IATF 16949 - Automotive Quality Systems Standard 15
J IATF Minimum Automotive Quality Management System Requirements for Sub-Tier Suppliers IATF 16949 - Automotive Quality Systems Standard 12
D Supplier Scorecard, Assessment of Pass Through Items From Sub Tier Suppliers Supplier Quality Assurance and other Supplier Issues 4
T PPAP - Complaint from a Tier One customer concerning Product Dimension IATF 16949 - Automotive Quality Systems Standard 26
xfngrs CQI-19 Sub-Tier Supplier Management IATF 16949 - Automotive Quality Systems Standard 1
P Tier 2 Part Approval where Painting is Outsourced APQP and PPAP 2
Manix Automotive Warranty Process at Tier 1 Level Challenges and Development Considerations Quality Manager and Management Related Issues 2
Buckyb Boeing QMS Requirements for Tier 2 Distributors AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 20
R Tier 2 Laboratory Accreditation IATF 16949 - Automotive Quality Systems Standard 3
M Key Supplier Risk Mitigation - Supplier Changes or wants to change Sub-Tier Suppliers Supplier Quality Assurance and other Supplier Issues 5
M Are OEM requirements (CSR) applicable to Tier 2 Suppliers IATF 16949 - Automotive Quality Systems Standard 3
J We anneal aluminum tube (tier 2, bulk material) - Does CQI-9 apply to us? IATF 16949 - Automotive Quality Systems Standard 4
M CAPA (Corrective and Preventive Action) Standards & Templates for Tier 1 Supplier IATF 16949 - Automotive Quality Systems Standard 4
P Problem with TS 16949 System Scope in Tier 2 Company IATF 16949 - Automotive Quality Systems Standard 3
T Diversity Vendor (Supplier) Requirements for Tier 1 and 2 Companies Customer and Company Specific Requirements 3
H Tier 1 ISO/TS 16949 Subscribers (Origin of TS 16949) IATF 16949 - Automotive Quality Systems Standard 9
B Supplier Development - TS 16949 Flow Down Requirements - Tier 2 Supplier IATF 16949 - Automotive Quality Systems Standard 13
K TS 16949 Tier 2 Customer Specific Requirements? IATF 16949 - Automotive Quality Systems Standard 9
T Reopening a Closed Division - Multi-division tier 2 automotive supplier IATF 16949 - Automotive Quality Systems Standard 7
P Must show Sub-Supplier details? Supplying a Tier 2 company IATF 16949 - Automotive Quality Systems Standard 7
V Are Customer Specific Requirements applied to the second tier suppliers Customer and Company Specific Requirements 14
N How are YOUR tier 2 documents numbered? Document Control Systems, Procedures, Forms and Templates 16
M Tier II Automotive Paint Shop - questions questions questions IATF 16949 - Automotive Quality Systems Standard 9
J Chrysler Gage Standard - Gage standard for all Tier II stamping gages Customer and Company Specific Requirements 3
G Manufacturing -> Warehouse -> Tier 1/OEM - Process flow, PFMEA, & Control Plan FMEA and Control Plans 9
R Approved Vendor (Supplier) if Customer Pays Sub-tier Shipping Company ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 9
Q Supplier PPAPs - Self Certified - First tier supplier to Ford APQP and PPAP 1
D Are FIR's performed per AS9102, either at Tier 2 or from Tier 3's? AS9100, IAQG, NADCAP and Aerospace related Standards and Requirements 2
D TS 16949 and Control Plans - Need Tier II/III follow AIAG Annex A Format? IATF 16949 - Automotive Quality Systems Standard 27
W Eligibility of Tier 2 supplier of forged parts to get TS 16949:2002 certificate IATF 16949 - Automotive Quality Systems Standard 13
B Can I use Multiple Sub-Tier Suppliers for the Same Part Number APQP and PPAP 2
M What are the Ford Tier 1 Requirements Customer and Company Specific Requirements 3
Q QS9000 Tier 2 for 12 Years - Transitioning to ISO9001 - Where do I start? ISO 9000, ISO 9001, and ISO 9004 Quality Management Systems Standards 25
S PPAP for my tier 3 suppliers - Sub-Supplier Process Changes APQP and PPAP 16
B TS 16949 CSR for GM Tier 2 Machining Sources Customer and Company Specific Requirements 2
V Ford 2nd Tier info - Ford is asking us for a list of all of our suppliers Customer and Company Specific Requirements 29
A Definition Tier one, Tier two and Tier three suppliers? What do these mean? Definitions, Acronyms, Abbreviations and Interpretations Listed Alphabetically 3
T Second Tier Laboratory Requirements for TS 16949 IATF 16949 - Automotive Quality Systems Standard 3
D Supplier QMS Development - Tier 3 integrated circuit supplier to automotive Supplier Quality Assurance and other Supplier Issues 4
L Are we a tier 1 or a tier 2 supplier? Supplier Quality Assurance and other Supplier Issues 3
A How is APQP flowed down to sub-tier suppliers in the automotive industry? APQP and PPAP 5
T Design responsible? Tier 2 / 3 manufacturer of steel products - TS 16949 Design and Development of Products and Processes 6
R Who is the "customer" in TS 16949? Are we are tier 2 or 3 of an OEM? IATF 16949 - Automotive Quality Systems Standard 3

Similar threads

Top Bottom